Vertical Pumps
Designed and meant to be used as a vertically mounted assembly.
Typical vertical pumps include or have as an option some sort of
mounting plate. Others are meant to be completely submersed in the
liquid. Vertical pumps can have either a relatively short shaft and
therefore be canti-levered from the motor allowing for them to
operate without bearings and to run-dry. Others have some sort of
bearings or bushings, usually a non-metallic type, somewhere along
the shaft to minimize shaft run-out and whip. This category also
includes those pumps, which are hermetically sealed pump and motor
units, suitable for being completely submersed in the liquid.
Unlike horizontals, vertical pumps rarely need to be primed, the
impeller and casing simply need to be submerged during start-up.
Here considerations are usually on the controlling of the pump
on-off cycles with some sort of float switch.
-
EBARA Pumps
Stainless Vertical Booster pump
EVMU3-11F0300D1S
$2,860.44Stainless Steel Vertical Booster pump. With initial hydraulic coverage to 100 GPM and 800 feet TDH, the EBARA Model EVMU is designed for booster, water purification, and hot water applications.State-of-the-art formed stainless steel and several ...
3HP 115/230V ODP Learn More -
Flotec Pumps
Vertical Deep Well Jet Pump
FP4432
$866.15Vertical deep well jet pump can be used in 4" diameter or larger wells up to 260', or in 2" diameter wells up to 180'. The multi-stage is recommended when water depths exceed 50' or when more water is needed at shallow well depths than conventi...
-
EBARA Pumps
Stainless Steel Vertical Booster
EVMU10-6F0500D1S
$6,067.77Stainless Steel Vertical Booster Pump
Ebara EVMU series vertical multistage pumps cover a wide range of high pressure water pumping applications such as boosting to high elevations, boosting water pressure to chemical injection eductors, irrigati...
5HP 230V ODP Learn More