Horizontal Pumps
Designed and meant to be used as a horizontally mounted assembly.
This includes feet on the pump, motor or both for securing the pump
and motor to its floor or structure. The most common type of
Horizontal pump is the End Suction, where the fluid enters the
front end of the casing and exits perpendicularly. The source of
liquid is either above the pump, in which case it is a positive
head and no special priming is needed. If the liquid source is
below the pump then either a priming chamber is needed or use of
some sort of suction side valve, i.e. foot valve, to maintain prime
in an open pumping system. If the inlet and outlet go into the same
tank, i.e. re-circulating or filtering, and the lines are kept
below the surface level, then after initial priming the system will
maintain its prime.The two big considerations that must be given to
horizontal pumps is priming method and NPSHa.Typical Centrifugal
Horizontal pumps include mechanically sealed, magnetic coupled
seal-less, self-priming, multistage, jet, back pullout, portable,
API and ANSI to name a few.
-
AMT Pumps
Cast Iron Self priming 6000GPH
2821-95
$914.00Cast Iron Self priming. This line of AMT Self-priming semi-trash Centrifugal pumps is designed for Industrial and Commercial applications requiring high volume liquid transfer, waste water drainage and processing. These pumps feature self-clean...115/230v 1-1/2HP ODP Learn More -
AMT Pumps
Centrifugal Pump
489E-98
$1,176.00Stainless Steel 1HP centrifugal pump.
Replaced by 5022-98
The straight centrifugal pump is designed for continuous duty low pressure OEM, industrial/commercial and general service applications including circulation, chemical processing, liquid t...
115/230v 1HP TEFC Learn More -
Barmesa Pumps
IB11/2-3-2-1 Center Line Discharge
62071061
$2,571.00Center Line Discharge End-Suction Centrifugal Pump.
Commercial duty pumps featuring centerline discharge for easy inline plumbing and retrofit to other OEM pumps often used on chillers, cooling towers. Top centerline discharge similar to many ANS...
3HP 115/230v Learn More -
AMT Pumps
Cast Iron Heavy Duty High Flow Centrifugal
315E-95
$2,510.00AMT Industrial Straight Centrifugal pumps are suited for liquid and chemical transfer, brine heating and cooling, re-circulation, booster service and other industrial applications. Semi-open impeller features self-cleaning ability that makes th...230v/1 5HP TEFC Cast Iron Learn More -
AMT Pumps
4˝ Self-Priming Pump 230v
4873-95
$4,361.00Single phase AMT Self-Priming solids handling CI 4" Centrifugal pumps are designed for a broad range of high capacity dewatering applications, including dewatering, liquid transfer, circulation, drainage and irrigation. Dual volute design reduces ...
10HP 230v/1 4" Learn More -
Berkeley Pumps
B3TPMS Centrifugal Water Pump 10HP/1ph
B54651
$8,662.00End suction centrifugal pump, close coupled with mechanical seal. Used for irrigation, commercial swimming pool and other water transfer applictions.10HP/1ph Learn More -
Berkeley Pumps
B2TPM Berkeley Water Pump
B53766
$6,812.00Berkeley Water Pump. End suction centrifugal pump, close coupled with packing. Water pump for irrigation, water transfer, industrial applications.5hp 230v/1 packed Learn More -
March Pumps
Magnetic Kynar Pump
TE-7.5K-MD 1PH 2HP
$3,799.00SALE Magnetic Series 7.5 pumps are the only ones in the March product line with all molded parts constructed of natural Kynarï½®. This makes them ideal for sensitive applications where even a trace of foreign matter is unacceptable. Chemical p...2HP ,1ph Learn More -
Finish Thompson Pumps (FTI)
FTI DB5.5P Magnetic pump Polypro
DB5.5P-M233
$829.19Magnetic coupled pump.- Five-year warranty
- Extended run dry ability (with carbon bushing)
- High operating efficiency —Up to 70%
- Polypropylene construction
- Powerful neodymium magnets
- Close-coupled design
- Horizontal or vertical installation w...
1/4 Hp 115V, TEFC Learn More -
Finish Thompson Pumps (FTI)
FTI DB5.5 Magnetic coupled pump Polypro
DB5.5P-M226
$905.98Magnetic coupled pump.- Five-year warranty
- Extended run dry ability (with carbon bushing)
- High operating efficiency —Up to 70%
- Polypropylene construction
- Powerful neodymium magnets
- Close-coupled design
- Horizontal or vertical installation w...
1/2 Hp 115V, 60 Hz TEFC Learn More