My Cart

Horizontal Pumps

Designed and meant to be used as a horizontally mounted assembly. This includes feet on the pump, motor or both for securing the pump and motor to its floor or structure. The most common type of Horizontal pump is the End Suction, where the fluid enters the front end of the casing and exits perpendicularly. The source of liquid is either above the pump, in which case it is a positive head and no special priming is needed. If the liquid source is below the pump then either a priming chamber is needed or use of some sort of suction side valve, i.e. foot valve, to maintain prime in an open pumping system. If the inlet and outlet go into the same tank, i.e. re-circulating or filtering, and the lines are kept below the surface level, then after initial priming the system will maintain its prime.The two big considerations that must be given to horizontal pumps is priming method and NPSHa.Typical Centrifugal Horizontal pumps include mechanically sealed, magnetic coupled seal-less, self-priming, multistage, jet, back pullout, portable, API and ANSI to name a few.
View as List Grid

Items 1-10 of 116

Set Descending Direction
per page
Page
  1. Finish Thompson Pumps (FTI)

    FTI DB5.5P Magnetic pump Polypro

    DB5.5P-M233

    $829.19
    Magnetic coupled pump.
    • Five-year warranty
    • Extended run dry ability (with carbon bushing)
    • High operating efficiency —Up to 70%
    • Polypropylene construction
    • Powerful neodymium magnets
    • Close-coupled design
    • Horizontal or vertical installation w...
    1/4 Hp 115V, TEFC Learn More
  2. Finish Thompson Pumps (FTI)

    FTI DB5.5 Magnetic coupled pump Polypro

    DB5.5P-M226

    $905.98
    Magnetic coupled pump.
    • Five-year warranty
    • Extended run dry ability (with carbon bushing)
    • High operating efficiency —Up to 70%
    • Polypropylene construction
    • Powerful neodymium magnets
    • Close-coupled design
    • Horizontal or vertical installation w...
    1/2 Hp 115V, 60 Hz TEFC Learn More
  3. Finish Thompson Pumps (FTI)

    DB5.5V-M613 pump Kynar

    DB5.5V-M233

    $961.63
    Magnetic coupled pump all Kynar PVDF for extreme chemical resistance.
    • Five-year warranty
    • Extended run dry ability (with carbon bushing)
    • High operating efficiency —Up to 70%
    • Polypropylene construction
    • Powerful neodymium magnets
    • Close-couple...
    1/4 Hp 115V, TEFC, Kynar Learn More
  4. Pedrollo Pumps

    Turbine pump 3/4HP

    PQ07A16S

    $431.57
    Turbine pump.

    They are recommended for pumping clean water without abrasive particles and liquids that are chemically non aggressive to the materials from which the pump is made. FOR THEIR RELIABILITY, SIMPLICITY OF USE AND ECONOMY. THEY ARE SUIT...

    115v/1 Learn More
  5. Pedrollo Pumps

    Centrifugal End Suction pump

    PNGA07A16S

    $1,440.97
    Pedrollo centrifugal pump for clean water . They are recommended for pumping water and liquids that are chemicals but non aggressive to the materials from which the pump is made. RELIABLE AND MAINTENANCE FREE THEY ARE WIDELY USED IN THE DOMESTIC ...
    3/4HP 115v Learn More
  6. Little Giant Pumps

    3E-12NT

    503186

    $407.00

    Little Giant 503186, Model 3E-12NT , Direct Drive Pump, 1/15 HP, 115 Volts, 1/2" MNPT Discharge,.

    Features. Submersed or in-line use, water transfer or recirculation, water displays, air conditioners and machine tool coolants

    • Epoxy coated die-...
    115v 10' cord Learn More
  7. Little Giant Pumps

    PE-2H

    518400

    $196.77

    Epoxy encapsulated motor n 12.2' maximum lift n 47 watts n 1/4" MNPT discharge n Thermal overload protection n For submersible use only

    • 6' power cord w/o plug
    • Epoxy encapsulated motor
    • Nylon volute, impeller & screen
    • Conduit fitting for mount...
    PE-2 Learn More
  8. Little Giant Pumps

    PE-2.5F

    518600

    $226.72
    1/28 hp epoxy encapsulated, direct drive motor Designed for continuous duty, submersible use only Glass-filled polyester housing Polypropylene volute Fluoroelastomer (FKM) shaft seal Snap off screen covers intake cCSAus listed.
    • 6' power c...
  9. MP Pumps

    316SS pump

    35666

    $570.00

    CFX 75---3/4" x 3/4" End Suction Centrifugal Pump 316SS Pump for chemicals, salt water or many other liquids where corrosion is a problem.

    Not self priming

    Marine Boat air conditioning is a big market for these pumps along with heavy equipment. ...

    115v 1/6HP 3/4" Learn More
  10. Pearl Calpeda Pumps

    High Head Centrifugal pump

    NM1A03A16S

    $329.60
    Pearl Calpeda centrifugal pump NM1A 03A16S for clean water, high pressure. They are recommended for pumping clean water and liquids that are chemically non aggressive to the materials from which the pump is made.

    RELIABLE AND MAINTENANCE FREE THE...

    1/3HP 115v Learn More
View as List Grid

Items 1-10 of 116

Set Descending Direction
per page
Page