My Cart

Horizontal Pumps

Designed and meant to be used as a horizontally mounted assembly. This includes feet on the pump, motor or both for securing the pump and motor to its floor or structure. The most common type of Horizontal pump is the End Suction, where the fluid enters the front end of the casing and exits perpendicularly. The source of liquid is either above the pump, in which case it is a positive head and no special priming is needed. If the liquid source is below the pump then either a priming chamber is needed or use of some sort of suction side valve, i.e. foot valve, to maintain prime in an open pumping system. If the inlet and outlet go into the same tank, i.e. re-circulating or filtering, and the lines are kept below the surface level, then after initial priming the system will maintain its prime.The two big considerations that must be given to horizontal pumps is priming method and NPSHa.Typical Centrifugal Horizontal pumps include mechanically sealed, magnetic coupled seal-less, self-priming, multistage, jet, back pullout, portable, API and ANSI to name a few.
View as List Grid

Items 2141-2150 of 2656

Set Descending Direction
per page
Page
  1. Finish Thompson Magnetic Pump

    Finish Thompson Pumps (FTI)

    Finish Thompson Magnetic Pump

    KC32PCVO601808
    $9,008.41
    Finish Thompson Inc. Magdrive sealless pumps designed for chemical processing and the highest level of reliability.

    All series KC pumps from FTI feature Neodymium Rare-Earth magnets. The resultant superior benefits over traditional ceramic mag...

    Learn More
    Add to Wish List Add to Compare
  2. 5765-95 AMT pump gorman rupp SH4A3-E3 submersible

    AMT Pumps

    Submersible Shredder Sewage Pump

    5765-95
    23% Off Special Price $2,478.92 Regular Price $3,219.38

    Submersible Shredder Sewage pumps feature an enhanced spiral shredder mechanism plate and carbide tipped impeller to prevent clogging and reduce maintenance when cutting through stringy, fibrous and sludge type waste. Applications include sewage p...

    230v/1 3HP 13,200GPH 4" Learn More
    Add to Wish List Add to Compare
  3. Finish Thompson Magnetic Pump

    Finish Thompson Pumps (FTI)

    Finish Thompson Magnetic Pump

    KC32PCVO601809
    $10,699.16
    Finish Thompson Inc. Magdrive sealless pumps designed for chemical processing and the highest level of reliability.

    All series KC pumps from FTI feature Neodymium Rare-Earth magnets. The resultant superior benefits over traditional ceramic mag...

    Learn More
    Add to Wish List Add to Compare
  4. Wayne SWS100 Shallow Well Jet Pump

    Wayne

    Shallow Well Jet Pump

    SWS100
    $500.04
    Shallow well jet pumps are designed to pump water from 0-25 ft. lifts. Self-priming after the pump housing is initially filled with water and a foot valve installed.
    • High efficiency square flange motor is thermally protected to prevent ove...
    Learn More
    Add to Wish List Add to Compare
  5. Finish Thompson Magnetic Pump

    Finish Thompson Pumps (FTI)

    Finish Thompson Magnetic Pump

    KC32PCVO601811
    $9,085.21
    Finish Thompson Inc. Magdrive sealless pumps designed for chemical processing and the highest level of reliability.

    All series KC pumps from FTI feature Neodymium Rare-Earth magnets. The resultant superior benefits over traditional ceramic mag...

    Learn More
    Add to Wish List Add to Compare
  6. Finish Thompson Magnetic Pump

    Finish Thompson Pumps (FTI)

    Finish Thompson Magnetic Pump

    KC32PCVO601812
    $9,397.27
    Finish Thompson Inc. Magdrive sealless pumps designed for chemical processing and the highest level of reliability.

    All series KC pumps from FTI feature Neodymium Rare-Earth magnets. The resultant superior benefits over traditional ceramic mag...

    Learn More
    Add to Wish List Add to Compare
  7. 5765-95_7.gif

    AMT Pumps

    Submersible Shredder Sewage Pump

    5767-95
    20% Off Special Price $3,676.25 Regular Price $4,595.31

    AMT Submersible Shredder Sewage pumps feature an enhanced spiral shredder mechanism plate and carbide tipped impeller to prevent clogging and reduce maintenance when cutting through stringy, fibrous and sludge type waste. Applications include s...

    230v/3 5HP 4" Learn More
    Add to Wish List Add to Compare
  8. Finish Thompson Magnetic Pump

    Finish Thompson Pumps (FTI)

    Finish Thompson Magnetic Pump

    KC32PCVO602113
    $10,316.40
    Finish Thompson Inc. Magdrive sealless pumps designed for chemical processing and the highest level of reliability.

    All series KC pumps from FTI feature Neodymium Rare-Earth magnets. The resultant superior benefits over traditional ceramic mag...

    Learn More
    Add to Wish List Add to Compare
  9. Finish Thompson Magnetic Pump

    Finish Thompson Pumps (FTI)

    Finish Thompson Magnetic Pump

    KC32PCVO602115
    $8,141.70
    Finish Thompson Inc. Magdrive sealless pumps designed for chemical processing and the highest level of reliability.

    All series KC pumps from FTI feature Neodymium Rare-Earth magnets. The resultant superior benefits over traditional ceramic mag...

    Learn More
    Add to Wish List Add to Compare
  10. Wayne SWS50 Shallow Well Jet Pump

    Wayne

    Shallow Well Jet Pump

    SWS50
    $428.95

    Features & Benefits

    • High efficiency square flange motor is thermally protected to prevent overheating and universally available if replacement is ever required
    • Pressure switch pre-set at 30-50psi for automatic operation when used with water...
    sws Learn More
    Add to Wish List Add to Compare
View as List Grid

Items 2141-2150 of 2656

Set Descending Direction
per page
Page
Compare Products
  1. Remove This Item
Compare
Clear All
Shop By
Shopping Options
Category
  1. Mechanical Sealed Pump 2362 items
  2. Magnetic Coupled (Seal-less) Pumps 287 items
Phase (Ø)
  1. Single (1) 884 items
  2. Three (3) 931 items
Voltage (Range)
  1. 110-120 134 items
  2. 208-230/460//190-220/380-415 19 items
  3. 208-240 18 items
  4. 220-240/460-480 580 items
  5. 110-120/220-240 691 items
  6. 220-240 245 items
  7. 208-240/460 417 items
  8. 230/460 1 item
  9. 460-480 20 items
  10. 12/24/36 VDC 66 items
Horse Power (HP)
  1. 1/4 8 items
  2. 1/3 41 items
  3. 1/2 250 items
  4. 2/3 1 item
  5. 3/4 280 items
  6. 1 276 items
  7. 1 1/2 261 items
  8. 2 229 items
  9. 2 1/2 18 items
  10. 3 258 items
  11. 3 1/2 12 items
  12. 4 16 items
  13. 5 203 items
  14. 5 1/2 31 items
  15. 6 9 items
  16. 7 12 items
  17. 7 1/2 106 items
  18. 8 14 items
  19. 9 10 items
  20. 10 84 items
  21. 11 4 items
  22. 13 12 items
  23. 15 34 items
  24. 18 8 items
  25. 20 19 items
  26. 25 7 items
  27. 30 8 items
  28. 40 2 items
  29. 45 2 items
  30. 50 4 items
  31. 60 2 items
  32. 75 1 item
  33. 100 1 item
  34. 125 1 item
inlet size
  1. Less than 1in 233 items
  2. 1in 191 items
  3. 1 ¼" 485 items
  4. 1 ½" 557 items
  5. 2in 529 items
  6. 2 ½" 63 items
  7. 3" 162 items
  8. 4" 59 items
  9. 5" 2 items
  10. 6" 11 items
  11. 8" 3 items
PRICE $
$  -  $
Manufacturer
  1. American Stainless 172 items
  2. AMT Pumps 394 items
  3. Aquatec Pumps 1 item
  4. Barmesa Pumps 16 items
  5. Barnes Pumps 5 items
  6. Berkeley Pumps 111 items
  7. Calpeda Pumps 4 items
  8. Darley Pumps 21 items
  9. EBARA Pumps 72 items
  10. Finish Thompson Pumps (FTI) 120 items
  11. Flotec Pumps 18 items
  12. General Pump 1 item
  13. Gorman-Rupp Pumps 25 items
  14. Graco Pumps 1 item
  15. Griswold Pumps 25 items
  16. Hypro Pumps 101 items
  17. Jabsco Pumps 14 items
  18. Koshin Pumps 18 items
  19. Little Giant Pumps 37 items
  20. March Pumps 137 items
  21. MP Pumps 209 items
  22. MTH Pumps 188 items
  23. Munro Pumps 23 items
  24. Myers Pumps 87 items
  25. Oberdorfer Pumps 71 items
  26. Pacer Pumps 121 items
  27. Pearl Calpeda Pumps 3 items
  28. Pedrollo Pumps 34 items
  29. Power-Flo Pumps 1 item
  30. PumpBiz 27 items
  31. Riverside 17 items
  32. RS Corcoran 11 items
  33. Serfilco 79 items
  34. Sta-Rite 156 items
  35. TrunkPump 5 items
  36. Tsurumi 12 items
  37. Wayne 11 items
  38. Webtrol 308 items
Motor
  1. Air-Pneumatic 17 items
  2. ChemDuty 25 items
  3. Diesel Engine 27 items
  4. EXP (C 1, Gp C/D & C11, Gp F/G) 53 items
  5. EXP (C 1, Gp C/D) 51 items
  6. Gas Engine 142 items
  7. Hermetically Sealed 24 items
  8. Hydraulic Motor 24 items
  9. ODP 1031 items
  10. Open 53 items
  11. PTO 53 items
  12. TEFC 872 items
  13. TENV 41 items
  14. WashDown 1 item