Hazardous-Location Centrifugal Pump
-
Manufacturer:
-
Series (7 Models):
-
Product Name:Hazardous-Location Centrifugal Pump
-
Model Number:2000D 1.5HP EXP
230/460v Fuel Pump
Built for pumping chemicals and corrosives in hazardous locations, these Type 316 stainless steel pumps have a motor that's UL listed and CSA certified for use in Class I, Groups C & D and Class II, Groups F & G locations, unless noted. They have a mechanical seal made of FKM elastomer's with a carbon rotating face and silicon carbide seat. Impellers are open and made of Type 316 stainless steel. Must be hardwired. Max. temp. is 250ï½° F (or, if lower, the boiling point of liquid being pumped). Fluids must be compatible with wetted parts (materials in contact with solution). Wetted parts are carbon, silicon carbide, Type 316 stainless steel, and FKM.
Pump solvents, diesel fuel, kerosene, isopropyl alcohol, and other flammable liquids in hazardous environments with flammable gases and combustible dust.
See other EXPlosion Proof / Hazardous duty pumps
| Model Number | 2000D 1.5HP EXP |
|---|---|
| Series | 2000D Hazardous Location 316SS Centrifugal Pumps |
| Max Flow (GPM.) | 114 |
| Max Flow GPH | 6840 |
| TDH Maximum (Ft) | 81 |
| TDH Maximum (PSI) | 35 |
| Horse Power (HP) | 1 1/2 |
| Horsepower (IE .5, 1, 1.5, 20) | 1.5000 |
| Inlet Connection Type | FNPT |
| inlet size | 1 ½" |
| Inlet (In.) | 1.5 |
| Outlet Connection Type | FNPT |
| Outlet (In.) | 1 |
| Wetted Materials | 316SS, Carbon |
| Elastomers / O-ring | FKM |
| Voltage (V) | 208-230/460 |
| Voltage (Range) | 208-240/460 |
| Phase (Ø) | Three (3) |
| Motor Frequency | 50/60 |
| Motor | EXP (C 1, Gp C/D) |
| Speed (RPM.) | 3450 |
| Motor Frame | 56C |
| Self Priming | No |
| Max Operating Temperature (F) | 250 |
| Viscosity | SAE 10 oil 88.00 cp 500.00 ssu |
| Shaft | 316SS |
| Mechanical Seal Face | SiC |
| Mechanical Seal Type | Single |
| Impeller Size (IN.) | 4.440000 |
| Other | These pumps have a motor that's UL listed and CSA certified for use in Class I, Groups C and D; Class II, Groups F and G hazardous locations. Close-Coupled, Do not run dry |
| Rotation | CCW |
| Impeller Material | 316SS |
| Cord Length (Ft.) | 0 |
| Duty | Continuous |
| Drain | No |
| Port Rotation | Yes |
| Country of Manufacture | United States |
| Weight (Lbs) | 85.000000 |
| Warranty (YRS.) | 1 |
| GPM Of Water At 20 Feet Of Head | 110 |
| GPM Of Water At 40 Feet Of Head | 90 |
| GPM Of Water At 60 Feet Of Head | 60 |
>
You May Be Interested In
