My Cart

Horizontal Pumps

Designed and meant to be used as a horizontally mounted assembly. This includes feet on the pump, motor or both for securing the pump and motor to its floor or structure. The most common type of Horizontal pump is the End Suction, where the fluid enters the front end of the casing and exits perpendicularly. The source of liquid is either above the pump, in which case it is a positive head and no special priming is needed. If the liquid source is below the pump then either a priming chamber is needed or use of some sort of suction side valve, i.e. foot valve, to maintain prime in an open pumping system. If the inlet and outlet go into the same tank, i.e. re-circulating or filtering, and the lines are kept below the surface level, then after initial priming the system will maintain its prime.The two big considerations that must be given to horizontal pumps is priming method and NPSHa.Typical Centrifugal Horizontal pumps include mechanically sealed, magnetic coupled seal-less, self-priming, multistage, jet, back pullout, portable, API and ANSI to name a few.
View as List Grid

Items 31-40 of 49

Set Descending Direction
per page
  1. March Pumps

    MAG Pump 1/12HP

    AC-4C-MD 115V

    $387.00

    Series 4 pumps can deliver a maximum flow of 14 GPM (50 LPM) and are capable of serving applications with a maximum head of 21.5 ft. (4.7m) (49 ft. [15.6 m] when driven by an air motor). Applications include electronic medical equipment, etchin...

    115v ODP Learn More
  2. March Pumps

    MAG Pump 1/150 HP Brushless

    893-07 12V DC

    $245.00

    Air cooled March circulator pumps, magnetic.

    Designed to operate at 12 volts DC, March Series 893 pumps are small in physical size and can deliver a maximum of up to 3.0 GPM (11 LPM) and can develop pressures up to 4.5 PSI (.31 BARS). All Series ...

    12vdc Learn More
  3. March Pumps

    MAG Pump 1/35

    AC-2AP-MD 115V

    $271.00

    Compact and adaptable to many applications, March Series 2 pumps can deliver a maximum flow of 5.5GPM (18.5 LPM) and handle a maximum head of up to 13.5 ft. (2.7m) (32 ft. [12m] when driven by an air motor.) Applications include etching equipment,...

  4. Little Giant Pumps

    3-MD-SC

    581513

    $564.08
    Little Giant MD-SC series features leakproof, seal-less magnetic drives and are designed for in-line, non-submersible use. Volute, magnet housing and impeller are glass-filled polypropylene for excellent chemical resistance. Ceramic shaft and t...
    230v/1 Learn More
  5. Little Giant Pumps

    3-MDX

    581031

    $373.75
    Magnetic Drive Pump 115V, 6' Power Cord, 3-Prong Plug. For other chemical pumps see March pumps BC-3CP-MD
  6. Little Giant Pumps

    4-MD

    582012

    $596.78
    Magnetic Drive Pump 230V, 6' Power Cord, No Plug
  7. Little Giant Pumps

    4-MD

    582002

    $547.73
    Magnetic Drive Pump 115V, 6' Power Cord, 3-Prong Plug
  8. Little Giant Pumps

    4-MD-HC

    582603

    $743.93
    The Little Giant MD-HC series features leakproof, seal-less magnetic drives and are designed for in-line, non submersible use. Volute, magnet housing and impeller are glass-filled Ryton for excellent chemical resistance. Ceramic shaft and thrust ...
  9. March Pumps

    MAGNETIC Pump 1/35

    AC-2CP-MD 115V

    $255.00

    March magnetic pump, Compact and adaptable to many applications, March Series 2 pumps can deliver a maximum flow of 5.5GPM (18.5 LPM) and handle a maximum head of up to 13.5 ft. (2.7m) (32 ft. [12m] when driven by an air motor.) Applications inclu...

  10. March Pumps

    March MAG Pump

    AC-1A-MD-1/2 115V

    $211.00

    Small but versatile, March Series 1 pumps can deliver a minimum of 1.7 GPM (7 LPM) up to 3.0 GPM (9 LPM). All Series 1 pumps are capable of serving applications with a maximum head of 4.5 ft. (1.3m) at zero GPM (0 LPM). Applications include pho...

    ac-1 Learn More
View as List Grid

Items 31-40 of 49

Set Descending Direction
per page