Horizontal Pumps
Designed and meant to be used as a horizontally mounted assembly.
This includes feet on the pump, motor or both for securing the pump
and motor to its floor or structure. The most common type of
Horizontal pump is the End Suction, where the fluid enters the
front end of the casing and exits perpendicularly. The source of
liquid is either above the pump, in which case it is a positive
head and no special priming is needed. If the liquid source is
below the pump then either a priming chamber is needed or use of
some sort of suction side valve, i.e. foot valve, to maintain prime
in an open pumping system. If the inlet and outlet go into the same
tank, i.e. re-circulating or filtering, and the lines are kept
below the surface level, then after initial priming the system will
maintain its prime.The two big considerations that must be given to
horizontal pumps is priming method and NPSHa.Typical Centrifugal
Horizontal pumps include mechanically sealed, magnetic coupled
seal-less, self-priming, multistage, jet, back pullout, portable,
API and ANSI to name a few.
-
AMT Pumps
Trash Pump 3" Pedestal Frame Mount
3S5XP
20% Off Special Price $871.20 Regular Price $1,089.00Trash Pump 3" Pedestal Frame Mount. 3" Aluminum trash pump with cast iron impeller and wearplate. FKM seals for AG chemicals. Picture shows the engine mounted model for ref. only. Made in USA, no trash from China. Be aware of other pumps which ...FKM seals PTO drive Learn More -
MP Pumps
Flomax 8 Pedestal pump Double Seal
33961
$1,880.00Flomax 8 pumps are self-priming pumps, pipe size 2" NPT. Cast Iron pump mounted to a CI bearing pedestal which has a 3/4" diameter shaft. Right hand rotation. Often used with de-icing solutions (non-sodium)MP Pumps has redesigned its Double S...
Oil seal CI Learn More -
Pacer Pumps
SE2JLCSS Pedestal Self Priming Pump
58-12J4P
$460.00S pump, cast iron frame mounted (pedestal) for long coupling or PTO drive. Pacer Pumps' S Series Self-Priming Centrifugal pumps are lightweight, chemically resistant pumps for general service on water, salt water, waste water, mild acids and bases...
Frame mounted no motor Learn More -
Pacer Pumps
SE2JVCSS Pedestal Self Priming Pump
58-12J1P
$601.00S pump, cast iron frame mounted - pedestal for long coupling or PTO drive. SE2JVCSS Pacer Pumps' S Series Self-Priming Centrifugal pumps are lightweight, chemically resistant pumps for general service on water, salt water, waste water, mild acids ...
Frame mounted no motor Learn More -
Hypro Pumps
PTO Drive Polypro pump
9008P-OB
$1,081.98PolyPro end suction 1 1/2" x 1 1/4" pump end with Planetary oil bath gear drive for connection to a 21 tooth x 1.375 diameter female PTO spline with locking collar. Rated up to 1000 rpm. CCW pump shaft rotation. Silicon carbide seal. -
Hypro Pumps
PTO Drive Polypro pump
9018P-O
$1,355.09PolyPro end suction 1 1/2" x 1 1/4" pump end with Planetary oil bath gear drive for connection to a 21 tooth x 1.375 diameter female PTO spline with locking collar. Rated up to 1000 rpm. CCW pump shaft rotation. -
Hypro Pumps
PTO Drive Polypro pump
9018P-OB
$1,355.09PolyPro end suction 1 1/2" x 1 1/4" pump end with Planetary oil bath gear drive for connection to a 21 tooth x 1.375 diameter female PTO spline with locking collar. Rated up to 1000 rpm. CCW pump shaft rotation. Silicon carbide seal. -
Hypro Pumps
PTO Drive Polypro pump
9028C-O
$1,270.61Cast iron pump with oil lubricated grear drive and 1 3/5" 1000rpm female PTO hub with locking collar and mounting clip. Clip pumps to PTO sheild of most tractors. -
Hypro Pumps
PTO Drive Polypro pump
9006C-O
$1,265.98Cast iron pump with oil lubricated grear drive and 1 3/8" 540 rpm female PTO hub with locking collar and mounting clip. Clips pump to PTO sheild of most tractors. -
Hypro Pumps
PTO Drive Polypro pump
9008C-O
$1,265.98Cast iron pump with oil lubricated grear drive and 1 3/8" 1000 rpm female PTO hub with locking collar and mounting clip. Clips pump to PTO sheild of most tractors.