My Cart

Horizontal Pumps

Designed and meant to be used as a horizontally mounted assembly. This includes feet on the pump, motor or both for securing the pump and motor to its floor or structure. The most common type of Horizontal pump is the End Suction, where the fluid enters the front end of the casing and exits perpendicularly. The source of liquid is either above the pump, in which case it is a positive head and no special priming is needed. If the liquid source is below the pump then either a priming chamber is needed or use of some sort of suction side valve, i.e. foot valve, to maintain prime in an open pumping system. If the inlet and outlet go into the same tank, i.e. re-circulating or filtering, and the lines are kept below the surface level, then after initial priming the system will maintain its prime.The two big considerations that must be given to horizontal pumps is priming method and NPSHa.Typical Centrifugal Horizontal pumps include mechanically sealed, magnetic coupled seal-less, self-priming, multistage, jet, back pullout, portable, API and ANSI to name a few.
View as List Grid

Items 21-30 of 70

Set Descending Direction
per page
  1. AMT Pumps

    Stainless Pressure Pump Explosion Proof

    5539-X8

    $2,350.11

    Biodiesel pump. Hazardous Duty Explosion Proof motor.

    ethyl alcohol, isopropyl alcohol and sanitizer solutions for cleaning.

    High Pressure Stainless Pump is designed for continuous duty high flow and high pressure applications including chemical...

    1.5HP 115/230v EXP Learn More
  2. AMT Pumps

    High Volume Stainless Centrifugal Pump

    5473-X8

    $2,041.60

    Explosion Proof Stainless Steel Straight Centrifugal pumps

    is designed for continuous duty high flow and high pressure applications including chemical processing, liquid transfer, cooling, pressure boosting, circulating and applications requiring...

    230/460v Explosion Proof 3/4HP Learn More
  3. AMT Pumps

    Self Priming Explosion Proof Centrifugal Pump

    2852-X5

    $1,995.25

    Self Priming Explosion Proof Pump. Self-priming centrifugal pump for circulating, liquid transfer and dewatering applications. Self-cleaning, clog resistant impeller. EXP or Hazardous Duty electric motor. Built in flapper/check valve. Handle & ste...

    1/2HP 115/230v CI 67GPM EXP Learn More
  4. AMT Pumps

    High Pressure Centrif Pump EXP

    490C-95-EXP

    $2,589.00

    Electric Explosion Proof High Pressure Centrifugal Pump. High Head Centrifugal Pump with EXP motor. OBSOLETE, parts are available. See 5033- series. Designed for continuous duty, high pressure, high flow, general service water circulation and tran...

    2HP 230/1 Explosion Proof Learn More
  5. MTH Pumps

    Turbine Pump 3/4HP

    T41BBF751EB

    $1,661.11
    Mechanically sealled regenerative turbines for low flow high pressure applications. Serving a wide variety of markets and industries including boiler feed, condensate return, chillers / temperature controllers, refrigeration, petroleum, as well a...
  6. March Pumps

    Magnetic pump EXP PPS

    TE-5C-MD RYTON EXP 1P

    $1,653.68

    All Ryton PPS magnetic coupled pump. Ryton is a engineering thermoplastic and is good for many chemicals, solvents, alcohol and hot liquids. Motor is EXP 115/230 single phase. March pumps are used in industry, sanitizing with alcohol and special a...

    Ryton Pump 115/230V Explosion Proof Learn More
  7. MTH Pumps

    Turbine Pump 3HP

    T51JAI303EB

    $4,157.35
    Mechanically sealled regenerative turbines for low flow highpressure applications. Serving a wide variety of markets and industries includingboiler feed, condensate return, chillers / temperature controllers, refrigeration,petroleum, as well as t...
  8. MTH Pumps

    Turbine Pump 3HP

    T51GAI303EB

    $4,157.35
    Mechanically sealled regenerative turbines for low flow highpressure applications. Serving a wide variety of markets and industries includingboiler feed, condensate return, chillers / temperature controllers, refrigeration,petroleum, as well as t...
  9. March Pumps

    PVDF PUMP EXP

    TE-5.5K-MD XP 3PH 1/3HP

    $2,310.00
    Magnetic pump design w/closed impeller magnet assembly. Max. flow 30GPM. Head 41 ft. Temps. to 190F. 2.937 impeller. Explosion Proof motor pump has Kynar PVDF plastic construction & can handle strong halogen solutions & certain chronic or sulfu...
    230/460v Kynar Learn More
  10. March Pumps

    PVDF PUMP EXP

    TE-5.5K-MD XP 1PH 1/3HP

    $2,748.00
    PVDF Kynar magnetic sealless pump design w/closed impeller magnet assembly. Max. flow 30GPM. Head 41 ft. Temps. to 190F. 3.187 impeller. Explosion proof hazardous duty pump has Kynar plastic construction & can handle strong halogen solutions & ...
    115/230v EXP Kynar Learn More
View as List Grid

Items 21-30 of 70

Set Descending Direction
per page