Horizontal Pumps
Designed and meant to be used as a horizontally mounted assembly.
This includes feet on the pump, motor or both for securing the pump
and motor to its floor or structure. The most common type of
Horizontal pump is the End Suction, where the fluid enters the
front end of the casing and exits perpendicularly. The source of
liquid is either above the pump, in which case it is a positive
head and no special priming is needed. If the liquid source is
below the pump then either a priming chamber is needed or use of
some sort of suction side valve, i.e. foot valve, to maintain prime
in an open pumping system. If the inlet and outlet go into the same
tank, i.e. re-circulating or filtering, and the lines are kept
below the surface level, then after initial priming the system will
maintain its prime.The two big considerations that must be given to
horizontal pumps is priming method and NPSHa.Typical Centrifugal
Horizontal pumps include mechanically sealed, magnetic coupled
seal-less, self-priming, multistage, jet, back pullout, portable,
API and ANSI to name a few.
-
Berkeley Pumps
B1-1/2TPL Berkeley Water Pump
B53749
Berkeley pump. End suction centrifugal pump, close coupled with Packing. Water pump for irrigation, water transfer, industrial applications. Use Berkeley pump on your chiller, water booster pump, fish hatchery, building fire sprinkler system.5HP 230/460v Learn More -
Berkeley Pumps
B2-1/2TPMS Centrifugal Water Pump
B54572
B2-1/2TPMS Centrifugal Water Pump B54572.
Centrifugal water pump by Berkeley. Heavy duty, cast iron End suction centrifugal pump, close coupled to a electric motor with mechanical seal.
BERKELEY Close-Coupled End-Suction Pumps are ideal for most...
7.5HP 230/460v Learn More -
Berkeley Pumps
B4ZPKS Centrifugal Self-Priming Pump
B54636
Berkeley Type B, Self Priming pumps are built for continuous dependable performance and ease of repair. High lift designs allow suction lifts up to 25 feet at sea level. Ideal for transfer applications, standby fire protection, dewatering and i...
10HP 230/460v Learn More -
Berkeley Pumps
B8GPBM Centrifugal Pump
B51798
The type B, pumps are built for continuous dependable performance and ease of repair. Ideal for transfer applications, standby fire protection, dewatering and irrigation. Flows to 3000 GPM, Heads to 60 feet.
-
Flows to 3000 GPM, Heads to 60 ...25HP 230/460v Learn More
Berkeley Pumps
B1-1/2ZPH (15HP - Three Phase - CI)
B53759
Berkeley Pumps offers a variety of models with the pump attached directly to the motor frame.- All pumps offer back pull-out design
- Impeller size is 9"
- Berkeley Pump discharge size: 1-1/2"
- Berkeley Pump suction size: 2"
15HP 230/460v packed Learn More
Berkeley Pumps
B3ZPMS Centrifugal Water Pump
B54118
End suction centrifugal pump, close coupled with mechanical seal. Used for irrigation, fountains and other water transfer applications.15HP 230/460v/3 ODP Learn More
Berkeley Pumps
B3ZPLS Centrifugal Water Pump
B70224
End suction centrifugal pump, close coupled with mechanical seal. Used for irrigation, fountains and other water transfer applications.25HP 230/460v/3 ODP Learn More
Berkeley Pumps
B1-1/2ZPLS
B54504
Berkeley Pumps offers a variety of models with the pump attached directly to the motor frame.- All pumps offer back pull-out design
- American Made
- Berkeley Pump discharge size: 1-1/2"
- Berkeley Pump suction size: 2"
15HP 230/460v Seal Learn More
Berkeley Pumps
B1-1/2ZPLS
B08607
Berkeley Pumps offers a variety of models with the pump attached directly to the motor frame.- All pumps offer back pull-out design
- American Made
- Berkeley Pump discharge size: 1-1/2"
- Berkeley Pump suction size: 2"
20HP 230/460v Learn More
Berkeley Pumps
B1-1/2EPLS
B54078S
B1-1/2EPLS B54078s Berkeley Pump 20hp
Berkeley Pumps offers a variety of models with the pump attached directly to the motor frame.
- All pumps offer back pull-out design
- American Made
- Berkeley Pump discharge size: 1-1/2"
- Berkeley Pump suctio...
20HP 230/460v Learn More -
