Horizontal Pumps
Designed and meant to be used as a horizontally mounted assembly.
This includes feet on the pump, motor or both for securing the pump
and motor to its floor or structure. The most common type of
Horizontal pump is the End Suction, where the fluid enters the
front end of the casing and exits perpendicularly. The source of
liquid is either above the pump, in which case it is a positive
head and no special priming is needed. If the liquid source is
below the pump then either a priming chamber is needed or use of
some sort of suction side valve, i.e. foot valve, to maintain prime
in an open pumping system. If the inlet and outlet go into the same
tank, i.e. re-circulating or filtering, and the lines are kept
below the surface level, then after initial priming the system will
maintain its prime.The two big considerations that must be given to
horizontal pumps is priming method and NPSHa.Typical Centrifugal
Horizontal pumps include mechanically sealed, magnetic coupled
seal-less, self-priming, multistage, jet, back pullout, portable,
API and ANSI to name a few.
-
Sta-Rite
JB Centrifugal Pump High Head 1HP
JBHE3-63S
$1,798.00This pump has a heavy-duty cast iron construction with silicon bronze impeller.- Applications: Water systems and sprinkling for homes, farms and industry
- Drain Port: Provided for easy winterizing
- Easy Serviceability: Includes replaceable wear rin...
-
Sta-Rite
JB Centrifugal Pump High Head 2-1/2HP
JBHHG3-53S
$3,200.00This pump has a heavy-duty cast iron construction with silicon bronze impeller. Discontinued due to DOE efficiency standards of small pumps.- Applications: Water systems and sprinkling for homes, farms and industry
- Drain Port: Provided for ea...
-
Sta-Rite
JB Centrifugal Pump High Head 3/4HP
JBHD-62S
$1,537.00Sta-Rite - JBHD: JB Centrifugal Pump High Head 3/4HP brass impeller. This pump has a heavy-duty cast iron construction with silicon bronze impeller. Replace Myers CT07B- Applications: Water systems and sprinkling for homes, farms and industry ...
3/4HP 115/230v Brass impeller Learn More -
Sta-Rite
JB Centrifugal Pump Med Head 1/2HP
JBMC-56S
$1,818.00This pump has a heavy-duty cast iron construction with silicon bronze impeller.- Applications: Water systems and sprinkling for homes, farms and industry
- Drain Port: Provided for easy winterizing
- Easy Serviceability: Includes replaceable wea...
-
Sta-Rite
JB Centrifugal Pump Med Head 1/2HP
JBMC3-56S
$1,696.00This pump has a heavy-duty cast iron construction with silicon bronze impeller.- Applications: Water systems and sprinkling for homes, farms and industry
- Drain Port: Provided for easy winterizing
- Easy Serviceability: Includes replaceable wear rin...
-
Sta-Rite
Sta-rite Centrifugal Pump
CCHH
$5,044.00Sta-rite Centrifugal Pump CCHH, high head. This pump is compact, but rugged. With optional basket strainer often used as a commercial pool pump.
- Applications: Irrigation, water systems, sprinkling for homes, farms and industry
- Base: Heavy gaug...
-
Webtrol
Cast Iron Booster Pump
H15B9-3
$4,039.23Webtrol has been building Booster Pumps For over 35 years for various industrial, commercial and agricultural uses and has long been a leader in the Reverse Osmosis and Deionization Industry.Webtrol's commitment to quality is defined in the co...1 1/2HP 230/460V ODP Learn More -
Berkeley Pumps
B1-1/2TPMS High Pressure Water Pump
B58084
$5,558.00High Pressure, End suction centrifugal pump, close coupled 3-phase motor with mechanical seal. Water pump for irrigation, water transfer, industrial applications. Berkeley water pumps are a industry leader for transfer, sprinkler, chiller, proces...5HP 230/460V ODP Learn More -
Berkeley Pumps
B5WPS Water Pump
B62580
$9,052.17Berkeley Pump End suction centrifugal pump, close coupled with mechanical seal. Water pump for irrigation, water transfer, industrial applications. Silicon Bronze impeller. Obsolete due to DOE new efficiency standards.7.5HP 3ph OBS Learn More -
Berkeley Pumps
B3ZPM (15HP - Three Phase - CI)
B51711
$11,231.00Berkeley Pumps offers a variety of models with the pump attached directly to the motor frame.- All pumps offer back pull-out design
- Impeller size is trimmed to 9"
- Berkeley Pump discharge size: 3"
- Berkeley Pump suction size: 4"
15hp 230/460v packing Learn More
