My Cart

Horizontal Pumps

Designed and meant to be used as a horizontally mounted assembly. This includes feet on the pump, motor or both for securing the pump and motor to its floor or structure. The most common type of Horizontal pump is the End Suction, where the fluid enters the front end of the casing and exits perpendicularly. The source of liquid is either above the pump, in which case it is a positive head and no special priming is needed. If the liquid source is below the pump then either a priming chamber is needed or use of some sort of suction side valve, i.e. foot valve, to maintain prime in an open pumping system. If the inlet and outlet go into the same tank, i.e. re-circulating or filtering, and the lines are kept below the surface level, then after initial priming the system will maintain its prime.The two big considerations that must be given to horizontal pumps is priming method and NPSHa.Typical Centrifugal Horizontal pumps include mechanically sealed, magnetic coupled seal-less, self-priming, multistage, jet, back pullout, portable, API and ANSI to name a few.
View as List Grid

Items 1-10 of 17

Set Descending Direction
per page
Page
  1. MP 36764 stainless steel flomax fm8 pump gas engine self priming

    MP Pumps

    316SS Self Priming Pump Honda

    38577
    $6,112.50

    316SS self priming pump powered by Honda gas engine.

    Stainless Steel Flomax 8 pump with Honda engine are self-priming pumps, pipe size 2" NPT. Gas Engine Driven w/ 5 HP Honda, recoil start. 316SS gas semi-trash pumps. 

    Standard features include ...

    5HP Honda Stainless Learn More
    Add to Wish List Add to Compare
  2. MP - 39759: 316SS Self prime pump gas engine

    MP Pumps

    316SS Self prime pump gas engine

    39759
    $2,050.00

    316SS Self prime pump gas engine. 3HP 4-cycle with recoil start.

    The patented ; FMX100 self-priming centrifugal pump is constructed of 316 SS for superior corrosion resistance and compatibility with most fluid types. A carbon / ceramic / FKM mech...

    3HP Gas Engine Learn More
    Add to Wish List Add to Compare
  3. MP FM30-18 FM30 Pump w/ 18HP Engine

    MP Pumps

    FM30 Pump w/ 18HP Engine

    38548
    $10,662.50

    Flomax 30 are self-priming pumps, pipe size 3" NPT. FM30 Pump with single seal and 18HP Briggs & Stratton engine. Use for irrigation, dewatering, tank filling, HDD, pilings, bilge, ballast transfer and other large water transfer or construction ap...

    Learn More
    Add to Wish List Add to Compare
  4. MP FM30-18 FM30 Pump w/ 18HP Engine

    MP Pumps

    FM30 Pump w/ 18HP Engine

    39143
    $10,350.00

    Flomax 30 are self-priming pumps, pipe size 3" NPT. FM30 Pump with single seal and 18HP Briggs & Stratton engine. Use for irrigation, dewatering, tank filling, bilge, HDD, pilings and other large water transfer or construction applications. Pump i...

    Learn More
    Add to Wish List Add to Compare
  5. MP_FM8 with gas engine

    MP Pumps

    FM 8 w/ Engine

    21323
    $1,358.50
    Flomax 8 are self-priming pumps, pipe size 2" NPT. Gas Engine Driven w/ 3.5 HP B&S. These heavy duty dewatering and transfer pumps are constructed of all cast iron. Used by farmers, contractors and others wanting a dependable centrifugal pump whi...
    3.5HP Briggs Cast Iron Learn More
    Add to Wish List Add to Compare
  6. MP 21372 Flomax pump Flomax 15

    MP Pumps

    Flomax 15 Pump End Only

    21372
    $1,850.00

    Flomax 15 PPK are self-priming pumps, pipe size 3" NPT. Gas Engine Driven Pump End Only PEO for use with a 1" diameter crankshaft. For mounting to a gas engine. Also available in pedestal mount or for NEMA JM motor mounts. See other models. see fl...

    Engine Mount 3" CI Learn More
    Add to Wish List Add to Compare
  7. MP 29635 FM 8 w/ Engine

    MP Pumps

    FM 8 w/ Engine

    29635
    $2,512.50
    Flomax 8 are self-priming pumps, pipe size 2" NPT. Gas Engine Driven w/ 5 HP Honda
    5HP Honda Learn More
    Add to Wish List Add to Compare
  8. MP 21371 FM 15 Pump End Only Bronze

    MP Pumps

    FM 15 Bronze Pump End Only

    21371
    $8,012.50
    Flomax 15 are self-priming pumps, pipe size 3" NPT. Gas Engine Driven Pump end only PEO for use with a 1" diameter crankshaft. For mounting to a gas engine. Also available in pedestal mount or for NEMA JM motor mounts. See other models. See fl...
    Learn More
    Add to Wish List Add to Compare
  9. MP 36764 stainless steel flomax fm8 pump gas engine self priming

    MP Pumps

    Honda Stainless Self Priming Flomax 8

    36764
    $6,077.50
    Honda Electric Start w/ Stainless Steel self priming pump.

    Stainless Steel Flomax 8 pump with Honda engine are self-priming pumps, pipe size 2" NPT. Gas Engine Driven w/ 5 HP Honda. 316SS gas semi-trash pumps. 

    Standard features include a 2″ NPT ...

    5HP ES Honda Stainless Learn More
    Add to Wish List Add to Compare
  10. MP 43929 2CT-3 Trash Pump PEO

    MP Pumps

    2CT-3 Trash Pump PEO

    43929
    $3,287.50
    2CT-3 Jaeger Trash Pumps, self-priming, cast iron. Pumpak for close-coupled gasoline engine supplied separately.

    The Model 2CT-3 is a 3" x 3" Self Priming Trash Pump which can be close coupled 145TC 1750rpm motor. This unit has cast iron constr...

    Pump End Only for engine Learn More
    Add to Wish List Add to Compare
View as List Grid

Items 1-10 of 17

Set Descending Direction
per page
Page
Compare Products
  1. Remove This Item
Compare
Clear All
Shop By
Now Shopping by
  1. Manufacturer MP Pumps Remove This Item
  2. Motor Gas Engine Remove This Item
Clear All
Shopping Options
Horse Power (HP)
  1. 3 1 item
  2. 3 1/2 1 item
  3. 5 3 items
  4. 8 2 items
  5. 9 2 items
  6. 11 1 item
  7. 13 1 item
  8. 18 2 items
inlet size
  1. 2in 4 items
  2. 3" 6 items
PRICE $
$  -  $