My Cart

Horizontal Pumps

Designed and meant to be used as a horizontally mounted assembly. This includes feet on the pump, motor or both for securing the pump and motor to its floor or structure. The most common type of Horizontal pump is the End Suction, where the fluid enters the front end of the casing and exits perpendicularly. The source of liquid is either above the pump, in which case it is a positive head and no special priming is needed. If the liquid source is below the pump then either a priming chamber is needed or use of some sort of suction side valve, i.e. foot valve, to maintain prime in an open pumping system. If the inlet and outlet go into the same tank, i.e. re-circulating or filtering, and the lines are kept below the surface level, then after initial priming the system will maintain its prime.The two big considerations that must be given to horizontal pumps is priming method and NPSHa.Typical Centrifugal Horizontal pumps include mechanically sealed, magnetic coupled seal-less, self-priming, multistage, jet, back pullout, portable, API and ANSI to name a few.
View as List Grid

Items 131-140 of 394

Set Descending Direction
per page
Page
  1. AMT 382A-K9 Thermoplastic pump kit

    AMT Pumps

    Thermoplastic pump kit

    382A-K9
    $366.56
    AMT Plastic General Purpose pumps Kit. The various models are designed to cover a wide array of applications including Ag, fertilizer, lawn care, dewatering, irrigation, solids handling, etc. All units are portable. Pumps are designed for use w...
    Pump Kit Learn More
    Add to Wish List Add to Compare
  2. 490D-98_45.gif

    AMT Pumps

    High Pressure Cast Iron Centrifugal Pump

    489F-95
    $1,028.50
    High pressure - head Centrifugal Pump. Designed for continuous duty, high pressure, high flow, general service water circulation and transfer (boosting water in high rise apartments, hotels & office buildings, circulation of hot & chilled water...

    1HP 3-Phase TEFC motor - OBSOLETE, call or email for alternative assistance. Parts still available.

    Learn More
    Add to Wish List Add to Compare
  3. gas dredge pump amt 316f-95

    AMT Pumps

    Gas Engine Dredge Pump

    316F-95
    $2,229.13
    Dredge Pump

    Gas Engine Driven Dredging Pump is designed for pumping sea water and fresh water containing up to 25% sand, debris and other abrasive particles. This unit can be used for other marine applications including dredging, pile driving,...

    Honda GX160 OHV w/ Oil Alert Learn More
    Add to Wish List Add to Compare
  4. amt 394g-95 pump

    AMT Pumps

    Sewage Trash pump 7.5HP

    394G-95
    $3,434.00

    Sewage Trash Pump, 7.5HP electric

    Self priming electric motor driven pumps for all sorts of medium sized debris. Factory sumps, Loading docks, wastewater pits, manure pits and high volume water transfer. Rugged American made pump. Motors are avai...

    230/460v 3P 20,400GPH, 3" 394A Learn More
    Add to Wish List Add to Compare
  5. 379b-95 AMT Pump Sprinkler Booster pump

    AMT Pumps

    Irrigation pump

    379B-95
    $1,116.69

    1.5HP Irrigation pump feature Investment Cast 316 SS closed impellers for high efficiency and resistance against erosion caused by abrasive particles. All irrigation pump models self-prime to 20 feet. Single stage irrigation pump models feature a ...

    1-1/2HP 115/230v TEFC Learn More
    Add to Wish List Add to Compare
  6. 2875-95_5.gif

    AMT Pumps

    3" CI Self-Prime Pump

    2877-95
    $2,576.56
    AMT / Gorman Rupp self-priming solids handling pumps are designed for a broad range of high capacity applications. Semi-trash pump made for demanding industrial applications, job site dewatering or pond transfer. The Centerline discharge is speci...
    3HP 230v/1 water pump Learn More
    Add to Wish List Add to Compare
  7. dredge pump amt_316f-95

    AMT Pumps

    Dredge Pump - Pedestal

    316F-99
    $1,567.19
    No engine, Pedestal 3/4" keyed shaft for customer mount driver.
    • High Chromium Stainless Steel Internal Components Resist Wear from Sea Water Mixed with Abrasive Sand
    • Silicon Carbide Mechanical Seal Resists Abrasives and Extends Seal Life
    • H...
    Pedestal Mount w/ 3/4" Keyed Shaft Learn More
    Add to Wish List Add to Compare
  8. amt_487 self priming pump

    AMT Pumps

    4˝ Self-Priming Semi-Trash Pump 10HP

    4871-95
    $3,483.94

    Self-Priming Semi-trash pump. A robust Cast Iron Centrifugal self priming pump designed for a broad range of high capacity applications, including dewatering, waste pits, liquid transfer, circulation, drainage and irrigation. Dual volute design re...

    4" 10HP 230/460v Learn More
    Add to Wish List Add to Compare
  9. amt_4873-95 4" pump

    AMT Pumps

    Cast Iron 4˝ Self-Priming Pump 15HP

    4872-95
    $3,947.19

    AMT Self-Priming 4" Cast Iron dewatering Centrifugal pumps are designed for a broad range of high capacity applications, including dewatering, liquid transfer, circulation, drainage and irrigation. Dual volute design reduces radial load on motor. ...

    15HP 230/460v Learn More
    Add to Wish List Add to Compare
  10. AMT Pumps - 394J-95: Electric Trash pump

    AMT Pumps

    Electric Trash pump 10HP

    394J-95
    $4,462.50

    Electric Trash Pump 3" & 10HP motor.

    AMT Cast Iron Sewage Trash pumps are designed for a trouble free and economical handling of solid-laden liquids and slurries. Pumps are available in three NPT port sizes; 2", 3" and 4". Cast iron construction ...

    230v/460v Replaces 394D-95 394E-95 Learn More
    Add to Wish List Add to Compare
View as List Grid

Items 131-140 of 394

Set Descending Direction
per page
Page
Compare Products
  1. Remove This Item
Compare
Clear All
Shop By
Now Shopping by
  1. Manufacturer AMT Pumps Remove This Item
Clear All
Shopping Options
Category
  1. Mechanical Sealed Pump 388 items
Phase (Ø)
  1. Three (3) 1 item
Voltage (Range)
  1. 110-120 4 items
  2. 208-230/460//190-220/380-415 5 items
  3. 208-240 3 items
  4. 220-240/460-480 120 items
  5. 110-120/220-240 109 items
  6. 220-240 52 items
  7. 208-240/460 14 items
  8. 460-480 5 items
  9. 12/24/36 VDC 12 items
Horse Power (HP)
  1. 1/4 1 item
  2. 1/3 6 items
  3. 1/2 28 items
  4. 3/4 37 items
  5. 1 50 items
  6. 1 1/2 39 items
  7. 2 58 items
  8. 2 1/2 1 item
  9. 3 55 items
  10. 3 1/2 2 items
  11. 4 6 items
  12. 5 26 items
  13. 5 1/2 2 items
  14. 6 3 items
  15. 7 2 items
  16. 7 1/2 20 items
  17. 8 2 items
  18. 9 2 items
  19. 10 15 items
  20. 11 1 item
  21. 13 3 items
  22. 15 5 items
inlet size
  1. Less than 1in 16 items
  2. 1in 36 items
  3. 1 ¼" 46 items
  4. 1 ½" 95 items
  5. 2in 79 items
  6. 3" 33 items
  7. 4" 9 items
  8. 6" 4 items
PRICE $
$  -  $
Motor
  1. Diesel Engine 2 items
  2. EXP (C 1, Gp C/D) 1 item
  3. Gas Engine 21 items
  4. ODP 129 items
  5. PTO 3 items
  6. TEFC 170 items
  7. TENV 9 items
  8. WashDown 1 item