My Cart

Horizontal Pumps

Designed and meant to be used as a horizontally mounted assembly. This includes feet on the pump, motor or both for securing the pump and motor to its floor or structure. The most common type of Horizontal pump is the End Suction, where the fluid enters the front end of the casing and exits perpendicularly. The source of liquid is either above the pump, in which case it is a positive head and no special priming is needed. If the liquid source is below the pump then either a priming chamber is needed or use of some sort of suction side valve, i.e. foot valve, to maintain prime in an open pumping system. If the inlet and outlet go into the same tank, i.e. re-circulating or filtering, and the lines are kept below the surface level, then after initial priming the system will maintain its prime.The two big considerations that must be given to horizontal pumps is priming method and NPSHa.Typical Centrifugal Horizontal pumps include mechanically sealed, magnetic coupled seal-less, self-priming, multistage, jet, back pullout, portable, API and ANSI to name a few.
View as List Grid

Items 1-10 of 139

Set Descending Direction
per page
Page
  1. Finish Thompson Pumps (FTI)

    FTI DB5.5P Magnetic pump Polypro

    DB5.5P-M233

    $829.19
    Magnetic coupled pump.
    • Five-year warranty
    • Extended run dry ability (with carbon bushing)
    • High operating efficiency —Up to 70%
    • Polypropylene construction
    • Powerful neodymium magnets
    • Close-coupled design
    • Horizontal or vertical installation w...
    1/4 Hp 115V, TEFC Learn More
  2. Finish Thompson Pumps (FTI)

    FTI DB5.5 Magnetic coupled pump Polypro

    DB5.5P-M226

    $905.98
    Magnetic coupled pump.
    • Five-year warranty
    • Extended run dry ability (with carbon bushing)
    • High operating efficiency —Up to 70%
    • Polypropylene construction
    • Powerful neodymium magnets
    • Close-coupled design
    • Horizontal or vertical installation w...
    1/2 Hp 115V, 60 Hz TEFC Learn More
  3. Finish Thompson Pumps (FTI)

    DB5.5V-M613 pump Kynar

    DB5.5V-M233

    $961.63
    Magnetic coupled pump all Kynar PVDF for extreme chemical resistance.
    • Five-year warranty
    • Extended run dry ability (with carbon bushing)
    • High operating efficiency —Up to 70%
    • Polypropylene construction
    • Powerful neodymium magnets
    • Close-couple...
    1/4 Hp 115V, TEFC, Kynar Learn More
  4. Flotec Pumps

    Stainless Steel Sprinkler Utility Pump

    2825SS-01

    $349.00
    Features:
    • Stainless Steel Pump Housing
    • Continuous duty rated 1 HP, 115 Volt motor , 3,450 RPM
    • Permanently lubricated Bearings mean no maintenance problems
    • Completely portable; pump mounted on stand with handle
    • Factory installed 6' power cord wit...
    Simer sprinkler pump Learn More
  5. March Pumps

    MAG Pump 1/20HP

    LC-3CP-MD 115V

    $462.00

    March magnetic pump, submersible or open air. March Seawater Circulation Pumps

    Simple, versatile and reliable, March Series 3 pumps feature an "orbital" magnetic drive and leak-proof design. They are rated up to 10GPM (33LPM) flow and for heads u...

    submersible or open air 115v Learn More
  6. Pedrollo Pumps

    Centrifugal End Suction pump

    CPX05A16S

    $307.97
    Currently out of stock, see Pearl pumps......Pedrollo centrifugal pump for clean water . They are recommended for pumping clean water and liquids that are chemically non aggressive to the materials from which the pump is made. RELIABLE AND MAIN...
    1/2HP 115v Learn More
  7. Pedrollo Pumps

    Turbine pump 3/4HP

    PQ07A16S

    $431.57
    Turbine pump.

    They are recommended for pumping clean water without abrasive particles and liquids that are chemically non aggressive to the materials from which the pump is made. FOR THEIR RELIABILITY, SIMPLICITY OF USE AND ECONOMY. THEY ARE SUIT...

    115v/1 Learn More
  8. Pedrollo Pumps

    Centrifugal End Suction pump

    PNGA07A16S

    $1,440.97
    Pedrollo centrifugal pump for clean water . They are recommended for pumping water and liquids that are chemicals but non aggressive to the materials from which the pump is made. RELIABLE AND MAINTENANCE FREE THEY ARE WIDELY USED IN THE DOMESTIC ...
    3/4HP 115v Learn More
  9. Little Giant Pumps

    2E-NDVR

    502303

    $263.78
    Industrial submersible or In-Line oil-filled pump with epoxy coated cast aluminum housing. For commercial, industrial applications including weak acids, fruit juices, cleaning solvents, anti-freeze, machine tool coolants, and many other applica...
    Acid pump 115v 1/40HP Learn More
  10. Little Giant Pumps

    3E-12NT

    503186

    $407.00

    Little Giant 503186, Model 3E-12NT , Direct Drive Pump, 1/15 HP, 115 Volts, 1/2" MNPT Discharge,.

    Features. Submersed or in-line use, water transfer or recirculation, water displays, air conditioners and machine tool coolants

    • Epoxy coated die-...
    115v 10' cord Learn More
View as List Grid

Items 1-10 of 139

Set Descending Direction
per page
Page