My Cart

Horizontal Pumps

Designed and meant to be used as a horizontally mounted assembly. This includes feet on the pump, motor or both for securing the pump and motor to its floor or structure. The most common type of Horizontal pump is the End Suction, where the fluid enters the front end of the casing and exits perpendicularly. The source of liquid is either above the pump, in which case it is a positive head and no special priming is needed. If the liquid source is below the pump then either a priming chamber is needed or use of some sort of suction side valve, i.e. foot valve, to maintain prime in an open pumping system. If the inlet and outlet go into the same tank, i.e. re-circulating or filtering, and the lines are kept below the surface level, then after initial priming the system will maintain its prime.The two big considerations that must be given to horizontal pumps is priming method and NPSHa.Typical Centrifugal Horizontal pumps include mechanically sealed, magnetic coupled seal-less, self-priming, multistage, jet, back pullout, portable, API and ANSI to name a few.
View as List Grid

Items 71-80 of 236

Set Descending Direction
per page
  1. MP Pumps

    316SS 12V pump

    34741

    $462.50

    CFX50 316SS 12VDC transfer Pump for chemicals, salt water or many other liquids where corrosion is a problem. Marine Boat air conditioning is a big market for these pumps along with heavy equipment. Model FRX 75 is a high performance 316 stainless...

    CFX50 12vdc Learn More
  2. Hypro Pumps

    Aqua-Tiger 24vdc SS pump

    COMSV024D

    $867.60
    Aqua-Tiger 24vdc SS pump COMSV024D. Investment cast 316 SS pump close coupled to a DC (battery, solar) motor for mobile applications. Often used in marine applications - bait tank, HVAC cooling and industrial generators diesel fuel transfer. Semi...
    24V DC Stainless Steel Learn More
  3. Oberdorfer Pumps

    Bronze Centrifugal Pump Pedestal

    50P-15

    $755.30
    Bronze Centrifugal Pedestal mounted for long coupling to customer drive. The liquid flow is proportional to the pump speed--the higher the speed the greater the flow. Horsepower required varies directly as flow and pressure. Maximum horsepower ...
  4. Little Giant Pumps

    2-MDQX Magnetic pump

    580507

    $426.46
    Magnetic Drive Pump 115V, 6' Power Cord, 3-Prong Plug. Magnetic Drive Aquarium Pump 1/30 HP, 115V, 6' power cord - SC Quarium Series for semi-corrosive salt solutions and chemicals, designed for in-line saltwater and freshwater aquarium circulatio...
  5. March Pumps

    March 12vdc Pump submersible

    893-04 12VDC

    $366.75

    March 12vdc submersible pump.

    Submersible Designed to operate at 12 DC, March Series 893 pumps are small in physical size and can deliver a maximum of up to 3.0 GPM (11 LPM) and can develop pressures up to 4.5 PSI (.31 BARS). All Series 1 pumps a...

    12v DC sub Learn More
  6. March Pumps

    24vDC submersible pump

    893-06 24VDC

    $333.00

    24vdc submersible pump.

    Submersible Designed to operate at 24 volts DC, March Series 893 pumps are small in physical size and can deliver a maximum of up to 3.0 GPM (11 LPM) and can develop pressures up to 4.5 PSI (.31 BARS). All Series 1 pumps a...

    24VDC Learn More
  7. Oberdorfer Pumps

    Bronze Centrifugal Pump Pedestal

    60PS-10

    $1,028.30

    Bronze Centrifugal Pedestal mounted for long coupling to customer drive. The liquid flow is proportional to the pump speed--the higher the speed the greater the flow. Horsepower required varies directly as flow and pressure. Maximum horsepower is ...

  8. March Pumps

    MAG Pump Brushless 12V

    893-09 12V DC

    $427.50

    Submersible Designed to operate at 12 volts DC,

    Submersible model. March Series 893 pumps are small in physical size and can deliver a maximum of up to 3.0 GPM (11 LPM) and can develop pressures up to 4.5 PSI (.31 BARS). Uses: Submersible. 18" wi...

    Submersible EBM Papst Motor Learn More
  9. March Pumps

    Circulating Pump 830

    830-CI-T 1PH

    $870.75

    March - 830-CI-T: Circulating Pump 

    The ultimate in reliability in circulating pumps for industrial / hydronic / solar applications up to 29GPM. Depending on application, March hydronic pumps are available in a variety of materials, including pla...

    Cast Iron 115/230v 29GPM Learn More
  10. March Pumps

    320 AP-MD High Pressure Pump

    320AP-MD

    $542.25
    High Pressure or Head centrifugal pump. March 320-AP-MD

    Model 320 Seal-Less Magnetic Coupled Corrosion Resistant Centrifugal Pump.

    For applications requiring low flow, but when it's necessary to develop pressure.

    This compact sized corrosion ...

    115v Learn More
View as List Grid

Items 71-80 of 236

Set Descending Direction
per page