Horizontal Pumps
Designed and meant to be used as a horizontally mounted assembly.
This includes feet on the pump, motor or both for securing the pump
and motor to its floor or structure. The most common type of
Horizontal pump is the End Suction, where the fluid enters the
front end of the casing and exits perpendicularly. The source of
liquid is either above the pump, in which case it is a positive
head and no special priming is needed. If the liquid source is
below the pump then either a priming chamber is needed or use of
some sort of suction side valve, i.e. foot valve, to maintain prime
in an open pumping system. If the inlet and outlet go into the same
tank, i.e. re-circulating or filtering, and the lines are kept
below the surface level, then after initial priming the system will
maintain its prime.The two big considerations that must be given to
horizontal pumps is priming method and NPSHa.Typical Centrifugal
Horizontal pumps include mechanically sealed, magnetic coupled
seal-less, self-priming, multistage, jet, back pullout, portable,
API and ANSI to name a few.
-
MP Pumps
316SS 12V pump
34741
$370.00CFX50 316SS 12VDC transfer Pump for chemicals, salt water or many other liquids where corrosion is a problem. Marine Boat air conditioning is a big market for these pumps along with heavy equipment. Model FRX 75 is a high performance 316 stainless...
CFX50 12vdc Learn More -
MP Pumps
316SS 24V pump
34296
$530.00316SS Pump CFX75 for chemicals, salt water or many other liquids where corrosion is a problem. Marine Boat air conditioning is a big market for these pumps along with heavy equipment. Model FRX CFX75 is a high performance 316 stainless steel ce...24v SS Learn More