My Cart

Horizontal Pumps

Designed and meant to be used as a horizontally mounted assembly. This includes feet on the pump, motor or both for securing the pump and motor to its floor or structure. The most common type of Horizontal pump is the End Suction, where the fluid enters the front end of the casing and exits perpendicularly. The source of liquid is either above the pump, in which case it is a positive head and no special priming is needed. If the liquid source is below the pump then either a priming chamber is needed or use of some sort of suction side valve, i.e. foot valve, to maintain prime in an open pumping system. If the inlet and outlet go into the same tank, i.e. re-circulating or filtering, and the lines are kept below the surface level, then after initial priming the system will maintain its prime.The two big considerations that must be given to horizontal pumps is priming method and NPSHa.Typical Centrifugal Horizontal pumps include mechanically sealed, magnetic coupled seal-less, self-priming, multistage, jet, back pullout, portable, API and ANSI to name a few.
View as List Grid

Items 11-20 of 208

Set Descending Direction
per page
  1. Pedrollo Pumps

    Clear water pump

    PK07C16S

    20% Off Special Price $357.62 Regular Price $447.02
    clear water pump., Turbine Pump, Peripheral pump.

    They are recommended for pumping clean water without abrasive particles and liquids that are chemically non aggressive to the materials from which the pump is made. For their reliability, simpl...

    3/4HP 230v/1 1" Learn More
  2. Pedrollo Pumps

    Clear water pump

    PKH07C16S

    $620.06
    Turbine Pump, Peripheral pump, clear water pump.

    They are recommended for pumping clean water without abrasive particles and liquids that are chemically non aggressive to the materials from which the pump is made. For their reliability, simpli...

    3/4HP 230v/1 Learn More
  3. Pedrollo Pumps

    Turbine pump 1HP Peripheral Impeller

    PKH07H36S

    $609.76
    Turbine Pump, Peripheral pump, clear water pump.

    They are recommended for pumping clean water without abrasive particles and liquids that are chemically non aggressive to the materialsfrom which the pump is made. For their reliability, simplic...

    3 phase Learn More
  4. Pedrollo Pumps

    Clear water pump

    PK20H36S

    $1,028.97
    Turbine Pump, Peripheral pump, clear water pump.

    They are recommended for pumping clean water without abrasive particles and liquids that are chemically non aggressive to the materialsfrom which the pump is made. For their reliability, simplicity...

    2HP 230/460v Learn More
  5. Pedrollo Pumps

    Centrifugal End Suction pump

    CP07A16S

    $399.64
    Pedrollo centrifugal pump for clean water . They are recommended for pumping clean water and liquids that are chemically non aggressive to the materials from which the pump is made. RELIABLE AND MAINTENANCE FREE THEY ARE WIDELY USED IN THE DOMEST...
    3/4HP 115v Learn More
  6. Pedrollo Pumps

    Turbo Drainer

    TDPK03 Turbo Drainer

    $209.09
    Turbine Pump, Peripheral pump.

    They are recommended for pumping clean water without abrasive particles and liquids that are chemically non aggressive to the materialsfrom which the pump is made. FOR THEIR RELIABILITY, SIMPLICITY OF USE AND ECONOM...

    115v Learn More
  7. MTH Pumps

    12 Volt Wash Down Pump

    DC10

    $3,412.49

    12 Volt Wash Down Pump

    12v DC pump, Superior 316SS construction, including impeller. Made to exceed OEM specifications for Pumper and Vac trucks. Replace original units on any truck. Mechanical Seal Box: The large seal chamber provides a wide flu...

    12v DC 1HP Learn More
  8. MP Pumps

    Series 30 w/ motor

    22741

    $1,390.00
    Series 30 End Suction Centrifugal Pump uses a close-coupled Cast Iron Electric Motor-0.5 HP, 3-phase, 230/460 V. The pump has 1" NPT suction and 0.75" NPT horizontal or vertical discharge.
  9. MP Pumps

    Series 30 w/ motor

    24481

    $1,160.00
    Series 30 End Suction Centrifugal Pump uses a close-coupled Cast Iron Electric Motor-0.5 HP, 3-phase, 230/460 V. The pump has 1" NPT suction and 0.75" NPT horizontal or vertical discharge.
  10. MP Pumps

    Series 30 w/ motor

    25457

    $1,320.00
    Series 30 End Suction Centrifugal Pump uses a close-coupled Cast Iron Electric Motor-0.75 HP, 3-phase, 230/460 V. The pump has 1" NPT suction and 0.75" NPT horizontal or vertical discharge.
View as List Grid

Items 11-20 of 208

Set Descending Direction
per page