My Cart

Horizontal Pumps

Designed and meant to be used as a horizontally mounted assembly. This includes feet on the pump, motor or both for securing the pump and motor to its floor or structure. The most common type of Horizontal pump is the End Suction, where the fluid enters the front end of the casing and exits perpendicularly. The source of liquid is either above the pump, in which case it is a positive head and no special priming is needed. If the liquid source is below the pump then either a priming chamber is needed or use of some sort of suction side valve, i.e. foot valve, to maintain prime in an open pumping system. If the inlet and outlet go into the same tank, i.e. re-circulating or filtering, and the lines are kept below the surface level, then after initial priming the system will maintain its prime.The two big considerations that must be given to horizontal pumps is priming method and NPSHa.Typical Centrifugal Horizontal pumps include mechanically sealed, magnetic coupled seal-less, self-priming, multistage, jet, back pullout, portable, API and ANSI to name a few.
View as List Grid

Items 1-10 of 36

Set Descending Direction
per page
Page
  1. AMT - 370C-98: Stainless Steel Centrifugal Pump

    AMT Pumps

    Stainless Steel Centrifugal Pump

    370C-98
    $994.50
    Designed for continuous-duty low pressure OEM, Industrial/Commercial and General Service applications including circulation, chemical processing, liquid transfer and cooling. Bodth single & three phase ODP or TEFC motors available up to 2HP. ...
    230/460v 3/4HP TEFC Learn More
    Add to Wish List Add to Compare
  2. 369D-98_15.gif

    AMT Pumps

    Cast Iron 3/4hp Pump

    370A-95
    $694.88
    Designed for continuous-duty low pressure OEM, Industrial/Commercial and General Service applications including circulation, chemical processing, liquid transfer and cooling. single phase TEFC motor.

    See Curve D

    Series: Centrifugal Pumps ...
    115/230v 3/4HP TEFC Learn More
    Add to Wish List Add to Compare
  3. 369D-98_17.gif

    AMT Pumps

    Cast Iron Centrifugal Pump

    370D-95
    $757.56

    Cast Iron Centrifugal Pump Designed for continuous-duty low pressure OEM, Industrial / Commercial and General Service applications including circulation, chemical processing, liquid transfer and cooling. three phase TEFC motor.

    When pumping bio-d...

    230/460v 1HP TEFC Learn More
    Add to Wish List Add to Compare
  4. 285J-95_2.gif

    AMT Pumps

    Self-Priming 1" Electric Pump

    2851-95
    $723.56

    Self-priming 1" Cast Iron electric pumps

    designed for circulating, boosting, washdown, liquid transfer and dewatering applications. The centerline discharge feature is specifically designed to prevent vapor binding and makes for convenient piping...

    1/3 115/230v ODP 1" Learn More
    Add to Wish List Add to Compare
  5. AMT 2.85E-93 Self Priming Centrifugal Pump

    AMT Pumps

    Self Priming Centrifugal Pump

    285E-95
    $812.81
    Self-priming centrifugal pump for circulating, liquid transfer and dewatering applications. Self-cleaning, clog resistant impeller. Light WVO, vegi oil, biodiesel. Used in a Biodiesel Processor application where it's pumping oil through it & sm...
    1/2HP 115/230v TEFC Learn More
    Add to Wish List Add to Compare
  6. AMT 2851-96 electric pump

    AMT Pumps

    Self-Priming Water Pump

    2851-96
    $724.63

    Water Pump. The AMT Self-priming Aluminum Centrifugal utility pumps are designed for circulating, boosting, washdown, liquid transfer and dewatering applications. Use for emergency water supply, storm drains, pool / spa drainage and select chemica...

    115v 1/3HP ODP Learn More
    Add to Wish List Add to Compare
  7. AMT - 370C-97: Bronze Centrifugal Pump

    AMT Pumps

    Bronze Centrifugal Pump

    370C-97
    $1,062.50
    Cast Bronze 3/4HP pump. Designed for continuous-duty low pressure OEM, Industrial/Commercial, marine and General Service applications including circulation, chemical processing, liquid transfer and cooling. Bronze pump close coupled to a three ...
    230/460v 3/4HP TEFC Learn More
    Add to Wish List Add to Compare
  8. AMT 4382-96 Honda Honda 1 inch Gas Water Pump

    AMT Pumps

    Honda 1 inch Gas Water Pump

    4382-96
    $591.81
    Portable water pump has Honda 2.5HP 4-Cycle engine GXH50. Cast Aluminum Utility pump 3600GPH for use in construction, irrigation, fire fighting, wash down, general dewatering, & herbicides. Includes built in check valve for quick re-prime start...
    Portable water pump with Honda engine - Made in USA Learn More
    Add to Wish List Add to Compare
  9. 2851-96.gif

    AMT Pumps

    Self Priming Electric Utility pump

    4292-96
    $612.00

    AMT Self-priming Utility pumps are reliable, cost effective, low maintenance and many are readily available "Off-the-Shelf" for fast, same day shipment.Alum. Model 4292-96 is designed to be portable and handle many water transfer services includin...

    115v 1/2HP Learn More
    Add to Wish List Add to Compare
  10. 369D-98_13.gif

    AMT Pumps

    Cast Iron Centrifugal Pump

    370F-95
    $688.50
    Cast Iron Centrifugal Pump by AMT, American made. Cast Iron Centrifugal PumpCast Iron Centrifugal PumpDesigned for continuous-duty low pressure OEM, Industrial/Commercial and General Service applications including circulation, chemical processin...
    230/460v 1/2HP TEFC Learn More
    Add to Wish List Add to Compare
View as List Grid

Items 1-10 of 36

Set Descending Direction
per page
Page
Compare Products
  1. Remove This Item
Compare
Clear All
Shop By
Now Shopping by
  1. inlet size 1in Remove This Item
  2. Manufacturer AMT Pumps Remove This Item
Clear All
Shopping Options
Voltage (Range)
  1. 110-120 1 item
  2. 220-240/460-480 15 items
  3. 110-120/220-240 18 items
  4. 220-240 1 item
Horse Power (HP)
  1. 1/3 3 items
  2. 1/2 9 items
  3. 3/4 10 items
  4. 1 7 items
  5. 1 1/2 4 items
  6. 2 2 items
  7. 2 1/2 1 item
PRICE $
$  -  $
Motor
  1. ODP 14 items
  2. TEFC 22 items