My Cart

Horizontal Pumps

Designed and meant to be used as a horizontally mounted assembly. This includes feet on the pump, motor or both for securing the pump and motor to its floor or structure. The most common type of Horizontal pump is the End Suction, where the fluid enters the front end of the casing and exits perpendicularly. The source of liquid is either above the pump, in which case it is a positive head and no special priming is needed. If the liquid source is below the pump then either a priming chamber is needed or use of some sort of suction side valve, i.e. foot valve, to maintain prime in an open pumping system. If the inlet and outlet go into the same tank, i.e. re-circulating or filtering, and the lines are kept below the surface level, then after initial priming the system will maintain its prime.The two big considerations that must be given to horizontal pumps is priming method and NPSHa.Typical Centrifugal Horizontal pumps include mechanically sealed, magnetic coupled seal-less, self-priming, multistage, jet, back pullout, portable, API and ANSI to name a few.
View as List Grid

Items 1-10 of 243

Set Descending Direction
per page
Page
  1. 282K-95_8.gif

    AMT Pumps

    Cast Iron Self priming 6000GPH

    2821-95
    $914.00
    Cast Iron Self priming. This line of AMT Self-priming semi-trash Centrifugal pumps is designed for Industrial and Commercial applications requiring high volume liquid transfer, waste water drainage and processing. These pumps feature self-clean...
    115/230v 1-1/2HP ODP Learn More
    Add to Wish List Add to Compare
  2. barmesa iC1 high head centrifugal pump 5hp

    Barmesa Pumps

    5HP High Pressure Pump

    62070515
    $1,991.00

    5HP High head, End-Suction Centrifugal Pump. 

    Commercial duty pumps featuring all cast iron construction. High pressure / head pump for irrigation.

    Applications

    • Booster systems
    • Water Transfer
    • Chilled Water System
    • High pressure at moderate ...
    5HP 230v/1 Learn More
    Add to Wish List Add to Compare
  3. March te-7r 3/4hp pump

    March Pumps

    March Magdrive Pump Ryton

    TE-7R-MD 1PH 3/4HP
    $1,145.00

    March Ryton Series 7 magnetic Pump.

    Magdrive / sealless pumps are the "workhorses" or the March product line. Ceramic spindle is standard. Drive magnet is separated from impeller magnet, preventing fluids from contacting the motor drive shaft, an...

    #7 Pump 115/230v 3/4HP Learn More
    Add to Wish List Add to Compare
  4. AMT 5535-X8 High Head Stainless Centrifugal Pump Explosion Proof

    AMT Pumps

    High Head Stainless Centrifugal Pump Explosion Proof

    5535-X8
    $2,545.95

    Stainless Steel Centrifugal pump with Explosion Proof Hazardous Duty motor,

    is designed for continuous duty high flow and high pressure applications including chemical processing, liquid transfer, cooling, pressure boosting, circulating and appli...

    2HP 115/230v EXP Learn More
    Add to Wish List Add to Compare
  5. High Pressure Cast Iron Centrifugal Pump

    AMT Pumps

    High Pressure Cast Iron Centrifugal Pump

    490A-95
    $1,047.60
    High Head CI Centrifugal Pumps. Designed for continuous duty, high pressure, high flow, general service water circulation and transfer (boosting water in high rise apartments, hotels & office buildings, circulation of hot & chilled water, press...
    230v 3HP TEFC Learn More
    Add to Wish List Add to Compare
  6. 490D-98_5.gif

    AMT Pumps

    Stainless Steel Centrifugal Pump

    4902-98
    $1,296.00
    The straight centrifugal pump is designed for continuous duty low pressure OEM, industrial/commercial and general service applications including circulation, chemical processing, liquid transfer, cooling, sprinkler/fire protection systems & pre...
    115/230v 1-1/2HP ODP Learn More
    Add to Wish List Add to Compare
  7. 282K-95_4.gif

    AMT Pumps

    SS AMT Centrifugal pump

    2828-98
    $2,119.00
    Stainless Steel SS AMT Self-priming semi-trash Centrifugal pumps are designed for Industrial and Commercial applications requiring high volume liquid transfer, waste water drainage and processing. These pumps feature self-cleaning clog resistan...
    115/230v 2HP ODP 1.5" Learn More
    Add to Wish List Add to Compare
  8. Berkeley B1WPS B54487S Centrifugal Water Pump

    Berkeley Pumps

    B1WPS Centrifugal Water Pump

    B54487S
    $6,313.00

    B54487S Berkeley B1WPS water pump.

    End suction centrifugal pump, close coupled with mechanical seal. Water pump for irrigation, water transfer, industrial applications.

    BERKELEY Close-Coupled End-Suction Pumps are ideal for most applications req...

    5HP 230/1 ODP Learn More
    Add to Wish List Add to Compare
  9. 282K-95_14 AMT Pumps - 282C-95

    AMT Pumps

    CI Centrifugal

    282C-95
    $943.00

    This line of AMT Self-priming Solids Handling pumps is designed for Industrial and Commercial applications requiring high volume liquid transfer, waste water drainage and processing.

    These pumps feature self-cleaning clog resistant impeller capab...

    115/230v 1HP TEFC Learn More
    Add to Wish List Add to Compare
  10. 490D-98_29.gif

    AMT Pumps

    High Pressure Cast Iron Centrifugal Pump

    490C-95
    $938.40
    High Pressure Centrifugal Pump Series Page Link. High Head Centrifugal Pump. Designed for continuous duty, high pressure, high flow, general service water circulation and transfer (boosting water in high rise apartments, hotels & office buildin...
    2HP 115/230v/1 TEFC Learn More
    Add to Wish List Add to Compare
View as List Grid

Items 1-10 of 243

Set Descending Direction
per page
Page
Compare Products
  1. Remove This Item
Compare
Clear All
Shop By
Now Shopping by
  1. Phase (Ø) Single (1) Remove This Item
  2. inlet size 1 ½" Remove This Item
Clear All
Shopping Options
Category
  1. Mechanical Sealed Pump 227 items
  2. Magnetic Coupled (Seal-less) Pumps 16 items
Voltage (Range)
  1. 110-120 1 item
  2. 208-240 6 items
  3. 220-240/460-480 1 item
  4. 110-120/220-240 200 items
  5. 220-240 35 items
Horse Power (HP)
  1. 1/3 2 items
  2. 1/2 32 items
  3. 3/4 53 items
  4. 1 38 items
  5. 1 1/2 43 items
  6. 2 37 items
  7. 3 27 items
  8. 5 11 items
PRICE $
$  -  $
Motor
  1. EXP (C 1, Gp C/D & C11, Gp F/G) 13 items
  2. EXP (C 1, Gp C/D) 4 items
  3. ODP 163 items
  4. TEFC 62 items