Horizontal Pumps
Designed and meant to be used as a horizontally mounted assembly.
This includes feet on the pump, motor or both for securing the pump
and motor to its floor or structure. The most common type of
Horizontal pump is the End Suction, where the fluid enters the
front end of the casing and exits perpendicularly. The source of
liquid is either above the pump, in which case it is a positive
head and no special priming is needed. If the liquid source is
below the pump then either a priming chamber is needed or use of
some sort of suction side valve, i.e. foot valve, to maintain prime
in an open pumping system. If the inlet and outlet go into the same
tank, i.e. re-circulating or filtering, and the lines are kept
below the surface level, then after initial priming the system will
maintain its prime.The two big considerations that must be given to
horizontal pumps is priming method and NPSHa.Typical Centrifugal
Horizontal pumps include mechanically sealed, magnetic coupled
seal-less, self-priming, multistage, jet, back pullout, portable,
API and ANSI to name a few.
-
AMT Pumps
High Pressure Pump Bronze
4240-94
20% Off Special Price $1,727.20 Regular Price $2,159.00High Pressure Bronze pump. AMT Industrial Straight Centrifugal pumps are suited for liquid and chemical transfer, heating and cooling, recirculation, booster service and other industrial applications. Semi-open impeller features self-cleaning a...230/460v 7.5HP TEFC Learn More -
AMT Pumps
Stainless High Pressure Centrifugal Pump 7.5hp
4240-98
20% Off Special Price $2,057.60 Regular Price $2,572.00Stainless High Pressure pump.
AMT Industrial Straight Centrifugal high head pumps are suited for liquid and chemical transfer, heating and cooling, recirculation, booster service and other industrial applications. Semi-open impeller features self...
230/460v 7.5HP TEFC Learn More -
Sta-Rite
JB Centrifugal Pump High Head 2-1/2HP
JBHHG3-53S
25% Off Special Price $2,400.00 Regular Price $3,200.00This pump has a heavy-duty cast iron construction with silicon bronze impeller. Discontinued due to DOE efficiency standards of small pumps.- Applications: Water systems and sprinkling for homes, farms and industry
- Drain Port: Provided for ea...
-
Finish Thompson Pumps (FTI)
FTI Magnetic coupled pump
DB11P-M215
$2,520.95FTI Magnetic coupled pump DB11 close coupled to a 2HP TEFC motor.- Five-year warranty
- Extended run dry ability (with carbon bushing)
- High operating efficiency —Up to 70%
- Polypropylene construction
- Powerful neodymium magnets
- Close-coupled de...
2HP 230/460v Polypro Learn More -
Finish Thompson Pumps (FTI)
Magnetic coupled pump
DB11P-M207
$2,504.25Magnetic coupled pump.- Five-year warranty
- Extended run dry ability (with carbon bushing)
- High operating efficiency —Up to 70%
- Polypropylene construction
- Powerful neodymium magnets
- Close-coupled design
- Horizontal or vertical installation w...
1-1/2HP 230/460v Learn More -
American Stainless
SS horizontal pump with 1.5 hp motor.
S24325BET3
$671.00ASP American Stainless Pump. Pumps have a one-piece shell, capable of supporting the pump and motor weight in a vertically mounted position. The internal design also prevents any air from being trapped in the pump case when mounted vertically. ...1 1/2HP 230/460V TEFC Learn More -
American Stainless
SS horizontal pump with 3 hp motor.
S24354B3T3
$984.91Models SSP & SSPC pumps have a one-piece shell, capable of supporting the pump and motor weight in a vertically mounted position. The internal design also prevents any air from being trapped in the pump case when mounted vertically. These pumps...3HP 230/460V TEFC Learn More -
American Stainless
SS horizontal pump with 2 hp motor.
S24340B2T3
$1,023.41Models SSP & SSPC pumps have a one-piece shell, capable of supporting the pump and motor weight in a vertically mounted position. The internal design also prevents any air from being trapped in the pump case when mounted vertically. These pumps d...2HP 230/460V TEFC Learn More -
American Stainless
SS pump & motor
C25024B3T3
$919.83SS pump & motor, 3HP 304 Stainless Steel
Models SSP & SSPC pumps have a one-piece shell, capable of supporting the pump and motor weight in a vertically mounted position. The internal design also prevents any air from being trapped in the pump c...
3HP 230/460V TEFC Learn More -
American Stainless
SS horizontal pump with 3 hp motor.
S24345B3T3
$1,090.48Models SSP & SSPC pumps have a one-piece shell, capable of supporting the pump and motor weight in a vertically mounted position. The internal design also prevents any air from being trapped in the pump case when mounted vertically. These pumps...3HP 230/460V TEFC Learn More