My Cart

Horizontal Pumps

Designed and meant to be used as a horizontally mounted assembly. This includes feet on the pump, motor or both for securing the pump and motor to its floor or structure. The most common type of Horizontal pump is the End Suction, where the fluid enters the front end of the casing and exits perpendicularly. The source of liquid is either above the pump, in which case it is a positive head and no special priming is needed. If the liquid source is below the pump then either a priming chamber is needed or use of some sort of suction side valve, i.e. foot valve, to maintain prime in an open pumping system. If the inlet and outlet go into the same tank, i.e. re-circulating or filtering, and the lines are kept below the surface level, then after initial priming the system will maintain its prime.The two big considerations that must be given to horizontal pumps is priming method and NPSHa.Typical Centrifugal Horizontal pumps include mechanically sealed, magnetic coupled seal-less, self-priming, multistage, jet, back pullout, portable, API and ANSI to name a few.
View as List Grid

Items 41-50 of 162

Set Descending Direction
per page
  1. AMT Pumps

    High Volume SS Straight Centrifugal Pump

    5493-98

    20% Off Special Price $799.20 Regular Price $999.00

    The AMT line of Stainless Steel Straight Centrifugal pumps is designed for continuous duty high flow and high pressure applications including chemical processing, liquid transfer, cooling, pressure boosting, circulating and applications requiring ...

    2HP 3P The AMT line of Stainless Steel Straight Centrifugal pumps is designed for continuous duty high flow and high pressure applications including chemical processing, liquid transfer, Learn More
  2. Myers Pumps

    Frame Mtd. 2 Stage w/ motor

    I2CIB-20MT

    $12,120.00

    Myers I2C, I2CI and I2CS Two-Stage Centrifugal pumps are designed and built for rugged continuous duty service. These high head (to 400 feet) medium capacity (to 140 GPM) are available in standard fitted (I2C), iron & bronze fitted (I2CI) epoxy...

  3. Myers Pumps

    Frame Mtd. 2 Stage w/ motor

    I2CIB-15MT

    $11,390.00

    Myers I2C, I2CI and I2CS Two-Stage Centrifugal pumps are designed and built for rugged continuous duty service. These high head (to 400 feet) medium capacity (to 140 GPM) are available in standard fitted (I2C), iron & bronze fitted (I2CI) epoxy c...

  4. Pacer Pumps

    SY2HLN D3.0C-LN

    58-32H88-D3.0C

    $2,781.00
    S pump close coupled to a TEFC 3 HP 230V/460v electric motor. Self priming Ryton PPS plastic resists abrasive particles, good for many mild chemical and most water transfer applications. Non metalic internals. No wetted metal parts. Used often as...
  5. AMT Pumps

    High Volume SS Straight Centrifugal Pump

    5497-98

    20% Off Special Price $871.20 Regular Price $1,089.00
    AMT Stainless Steel Straight Centrifugal pumps is designed for continuous duty high flow and high pressure applications including chemical processing, liquid transfer, cooling, pressure boosting, circulating and applications requiring contamina...
    3HP 230/460v TEFC Learn More
  6. Pacer Pumps

    ISPE2GL D3.0C

    58-52G4D3.0C

    $1,244.00

    Self-Priming SS Centrifugal Pumps, Pump casing is made of 304 stainless steel. Internal parts are glass reinforced polyester or glass reinforced polypropylene. All pumps include a built-in check valve.

    These pumps are standard for mobile shower o...

    3HP 230/460v/3 Stainless 2" Learn More
  7. Myers Pumps

    Frame Mtd. 2 Stage w/ motor

    I2CB-10MT

    $10,660.00

    High pressure centrifugal Pump.

    Myers I2C, I2CI and I2CS Two-Stage Centrifugal pumps are designed and built for rugged continuous duty service. These high head (to 400 feet) medium capacity (to 140 GPM) are available in standard fitted (I2C), ...
  8. Myers Pumps

    Framed Mtd. 2 Stage w/ motor

    I2CIB-10MT

    $10,660.00

    Myers I2C, I2CI and I2CS Two-Stage Centrifugal pumps are designed and built for rugged continuous duty service. These high head (to 400 feet) medium capacity (to 140 GPM) are available in standard fitted (I2C), iron & bronze fitted (I2CI) epoxy c...

  9. Pacer Pumps

    SE2EB D2.0C Self priming pump

    58-12E2-D2.0C

    $1,273.80

    Pacer 2hp Pump Electric motor pump. Self priming pump close coupled to a TEFC 230 / 460 3 phase electric motor. Self priming FRP plastic resists abrasive particles, good for most water transfer applications. See Curve "E"

    Often uses on liquid de-...

    2HP 230/460v Learn More
  10. MP Pumps

    FloMax 8 Pump w/ Motor

    28398-4

    $3,745.00
    Flomax 8 316SS Pumps are self-priming pumps, pipe size 2" NPT. Electric Motor Driven Pump using a Close-Coupled electric Motor-3 HP
    3HP 230/460v Learn More
View as List Grid

Items 41-50 of 162

Set Descending Direction
per page