Horizontal Pumps
Designed and meant to be used as a horizontally mounted assembly.
This includes feet on the pump, motor or both for securing the pump
and motor to its floor or structure. The most common type of
Horizontal pump is the End Suction, where the fluid enters the
front end of the casing and exits perpendicularly. The source of
liquid is either above the pump, in which case it is a positive
head and no special priming is needed. If the liquid source is
below the pump then either a priming chamber is needed or use of
some sort of suction side valve, i.e. foot valve, to maintain prime
in an open pumping system. If the inlet and outlet go into the same
tank, i.e. re-circulating or filtering, and the lines are kept
below the surface level, then after initial priming the system will
maintain its prime.The two big considerations that must be given to
horizontal pumps is priming method and NPSHa.Typical Centrifugal
Horizontal pumps include mechanically sealed, magnetic coupled
seal-less, self-priming, multistage, jet, back pullout, portable,
API and ANSI to name a few.
-
American Stainless
SS pump & motor
C24324BET3
$940.19Models SSP & SSPC pumps have a one-piece shell, capable of supporting the pump and motor weight in a vertically mounted position. The internal design also prevents any air from being trapped in the pump case when mounted vertically. These pumps d...1 1/2HP 230/460V TEFC Learn More -
Pacer Pumps
Plastic Corrosion Resistant pump PCE2CL-D2.0C
60-12C4-D2.0C
$987.00Plastic Corrosion Resistant Pump 2HP.
PC Horizontal Pump
All major pump parts are precision molded of tough, corrosion resistant glass-reinforced polyester, polypropylene, Ryton or Noryl thermoplastic. These high strength plastics provide resist...
230/460v/3 2 HP Learn More -
MP Pumps
FM 8 w/ Motor
26478
$2,131.00Flomax 8 are self-priming Cast Iron pumps, pipe size 2" NPT. Electric Motor Driven Pump using a Close-Coupled Electric Motor 2 HP 230/460v/3.2HP 230/460v TEFC CI Learn More -
MP Pumps
FM 8 w/ 3HP Motor
22870
$3,470.00Flomax 8 are self-priming Cast Iron pumps, pipe size 2" NPT. Electric Motor Driven Pump using a Coupled Electric Motor-3 HPCI 3HP 230/460v TEFC Learn More -
MP Pumps
FM 8 w/ Motor
22849
$3,700.00Flomax 8 are self-priming Cast Iron pumps, pipe size 2" NPT. Electric Motor Driven Pump using a Coupled Electric Motor-5 HP5HP 230/460v Cast Iron Learn More -
MP Pumps
FloMax 10 Pump w/ Motor
22722
$3,750.00Cast Iron Flomax 10 are self-priming pumps, pipe size 2" NPT. Electric Motor Driven Pump using Close-Coupled Cast Iron Electric Motor-7.5 HP7.5HP 230/460v Learn More -
MP Pumps
FM 8 w/ Motor 1725
33466
$1,310.00Flomax 8 are self-priming pumps, pipe size 2" NPT. Electric Motor Driven Pump using a Close-Coupled Cast Iron Electric Motor-1 HP1HP 230/460v 1725RPM CI Learn More -
AMT Pumps
Self Priming Dewatering Pump
2766-95
23% Off Special Price $907.83 Regular Price $1,179.00AMT Self-priming Centrifugal pumps is designed for Industrial and Commercial applications requiring high volume liquid transfer, waste water drainage and processing. These pumps feature self-cleaning clog resistant impeller capable of handling ...3HP 230/460v Learn More -
Berkeley Pumps
B1-1/2TPMS High Pressure Water Pump
B58086
High Pressure, End suction centrifugal pump, close coupled 3-phase motor with mechanical seal. Water pump for irrigation, water transfer, industrial applications. Berkeley water pumps are a industry leader for transfer, sprinkler, chiller, proces...7.5HP 230/460V ODP Learn More -
Berkeley Pumps
B1-1/2ZPL (7.5HP - Three Phase - CI)
B53751
Berkeley Pumps offers a variety of models with the pump attached directly to the motor frame.- All pumps offer back pull-out design
- Impeller size is trimmed to 7.18"
- Berkeley Pump discharge size: 1.5"
- Berkeley Pump suction size: 2"
7.5hp 230/460v packed Learn More