My Cart

Horizontal Pumps

Designed and meant to be used as a horizontally mounted assembly. This includes feet on the pump, motor or both for securing the pump and motor to its floor or structure. The most common type of Horizontal pump is the End Suction, where the fluid enters the front end of the casing and exits perpendicularly. The source of liquid is either above the pump, in which case it is a positive head and no special priming is needed. If the liquid source is below the pump then either a priming chamber is needed or use of some sort of suction side valve, i.e. foot valve, to maintain prime in an open pumping system. If the inlet and outlet go into the same tank, i.e. re-circulating or filtering, and the lines are kept below the surface level, then after initial priming the system will maintain its prime.The two big considerations that must be given to horizontal pumps is priming method and NPSHa.Typical Centrifugal Horizontal pumps include mechanically sealed, magnetic coupled seal-less, self-priming, multistage, jet, back pullout, portable, API and ANSI to name a few.
View as List Grid

Items 151-160 of 166

Set Descending Direction
per page
Page
  1. MP 35258 FM30 Pump w/ no motor

    MP Pumps

    FM30 Pump w/ no motor

    35258
    $5,250.00
    Flomax 30 are self-priming pumps, pipe size 3" NPT. Pump End Only single seal for mounting to 254-256TC motor.
    Cast iron, 7"Bronze impeller, FKM flapper Learn More
    Add to Wish List Add to Compare
  2. AMT_IPT diesel trash pump 3"

    Gorman-Rupp Pumps

    3" Diesel powered Trash Pump

    3S7XZR
    $8,547.81

    Trash pump, powered by diesel

    Hatz 5 HP engine (changing in 2019 to 1B30). 3" Cast aluminum housing with Cast Iron internals.trash pump. 2.6 qt fuel tank provides 110 min. continuous running.

    Ideally suited for a variety of industrial applicatio...

    3" Hatz Diesel 1B30 Learn More
    Add to Wish List Add to Compare
  3. AMT 3391-V5 Honda Electric start Portable 3 Solids Handling Pump Honda GX

    AMT Pumps

    Portable 3" Solids Handling Pump Honda GX

    3391-V5
    $3,719.81
    Electric start gas engine solids handling pump, semi-trash. The AMT solids-handling pumps offer an upgraded debris handling capability up to 3/4" solids. Great combination in high flow, moderate high pressure and some solids handling capability...
    Honda 8HP Semi-Trash pump Electric Start Learn More
    Add to Wish List Add to Compare
  4. MP 33211-332 CHEMFLO 8 5HP 1725

    MP Pumps

    CHEMFLO 8 5HP 1725

    33211-333
    $4,635.00
    Horizontal 316 Stn. Stl. close coupled to a 3 HP 1725 RPM 3 phase motor.
    Learn More
    Add to Wish List Add to Compare
  5. AMT 3391-99 Solids Handling Pedestal Pump 3

    AMT Pumps

    Solids Handling Pedestal Pump 3"

    3391-99
    $1,629.88

    Solids Handling Pedestal Pumps

    are designed for a wide range of industrial, agricultural and commercial applications. Heavy duty cast iron construction. Pumps are fitted with a self-cleaning, semi-open impeller and are coupled to a heavy duty cas...

    3" Semi-trash pump Learn More
    Add to Wish List Add to Compare
  6. Finish Thompson KC32VCV601804 Finish Thompson Magnetic Pump

    Finish Thompson Pumps (FTI)

    Finish Thompson Magnetic Pump

    KC32VCV601804
    $11,457.38
    Finish Thompson Inc. Pump. Magdrive sealless pumps designed for chemical processing and the highest level of reliability.

    All series KC pumps from FTI feature Neodymium Rare-Earth magnets. The resultant superior benefits over traditional ceramic ...

    Learn More
    Add to Wish List Add to Compare
  7. 3100-99_2.gif

    AMT Pumps

    Trash Pedestal Pump 3"

    3100-99
    $2,629.69

    Trash pump on Pedestal,

    pumps are designed for direct or belt drive. Frame mounted solids handling pump 3". Specific units are available in Cast Aluminum with Cast Iron impeller construction material. Easy cleanout design by removing casing bolts...

    3" Pedestal Trash pump Learn More
    Add to Wish List Add to Compare
  8. Finish Thompson KC32VCV501803 Magnetically Sealed Pump

    Finish Thompson Pumps (FTI)

    Magnetically Sealed Pump

    KC32VCV501803
    $10,900.30
    Magdrive sealless pumps designed for chemical processing and the highest level of reliability.

    All series KC pumps from FTI feature Neodymium Rare-Earth magnets. The resultant superior benefits over traditional ceramic mag pumps include:

    RUN DRY ...

    Learn More
    Add to Wish List Add to Compare
  9. Finish Thompson UC326AECSSVF4872124 ULTRAchem ANSI DIM. Mag Drive pump

    Finish Thompson Pumps (FTI)

    ULTRAchem ANSI DIM. Mag Drive pump

    UC326AECSSVF4872124
    $11,529.90
    Tefzel lined ANSI / ANSI B73.1 Casing dimensional Magnetic coupled process pump. Sealless. Powerful neodymium magnets, no seals to replace. The modified concentric volute equalizes pressure across the entire flow range allowing minimal hydrauli...
    3x2 10HP 3ph Learn More
    Add to Wish List Add to Compare
  10. Finish Thompson UC326AECSSVF4752131 ULTRAchem ANSI DIM. Mag Drive pump w/ 7.5hp motor

    Finish Thompson Pumps (FTI)

    ULTRAchem ANSI DIM. Mag Drive pump w/ 7.5hp motor

    UC326AECSSVF4752131
    $11,261.46
    Tefzel lined ANSI / ANSI B73.1 Casing dimensional Magnetic coupled process pump. Sealless. Powerful neodymium magnets, no seals to replace. The modified concentric volute equalizes pressure across the entire flow range allowing minimal hydraulic ...
    Learn More
    Add to Wish List Add to Compare
View as List Grid

Items 151-160 of 166

Set Descending Direction
per page
Page
Compare Products
  1. Remove This Item
Compare
Clear All
Shop By
Now Shopping by
  1. inlet size 3" Remove This Item
Clear All
Shopping Options
Category
  1. Mechanical Sealed Pump 157 items
  2. Magnetic Coupled (Seal-less) Pumps 8 items
Phase (Ø)
  1. Single (1) 12 items
  2. Three (3) 50 items
Voltage (Range)
  1. 110-120 1 item
  2. 208-230/460//190-220/380-415 4 items
  3. 220-240/460-480 51 items
  4. 110-120/220-240 2 items
  5. 220-240 16 items
  6. 208-240/460 6 items
  7. 460-480 2 items
Horse Power (HP)
  1. 3/4 2 items
  2. 3 2 items
  3. 3 1/2 1 item
  4. 5 20 items
  5. 5 1/2 6 items
  6. 6 2 items
  7. 7 6 items
  8. 7 1/2 25 items
  9. 8 13 items
  10. 9 3 items
  11. 10 21 items
  12. 11 1 item
  13. 13 2 items
  14. 15 10 items
  15. 18 2 items
  16. 20 4 items
  17. 25 1 item
  18. 30 7 items
  19. 40 2 items
PRICE $
$  -  $
Manufacturer
  1. AMT Pumps 33 items
  2. Berkeley Pumps 5 items
  3. Darley Pumps 5 items
  4. EBARA Pumps 1 item
  5. Finish Thompson Pumps (FTI) 7 items
  6. Gorman-Rupp Pumps 10 items
  7. Griswold Pumps 13 items
  8. Koshin Pumps 3 items
  9. March Pumps 1 item
  10. MP Pumps 43 items
  11. Munro Pumps 7 items
  12. Pacer Pumps 22 items
  13. Riverside 3 items
  14. RS Corcoran 1 item
  15. Sta-Rite 1 item
  16. TrunkPump 4 items
  17. Tsurumi 3 items
  18. Webtrol 4 items
Motor
  1. Air-Pneumatic 1 item
  2. Diesel Engine 5 items
  3. EXP (C 1, Gp C/D & C11, Gp F/G) 1 item
  4. Gas Engine 31 items
  5. Hydraulic Motor 7 items
  6. ODP 33 items
  7. PTO 7 items
  8. TEFC 58 items