My Cart

Horizontal Pumps

Designed and meant to be used as a horizontally mounted assembly. This includes feet on the pump, motor or both for securing the pump and motor to its floor or structure. The most common type of Horizontal pump is the End Suction, where the fluid enters the front end of the casing and exits perpendicularly. The source of liquid is either above the pump, in which case it is a positive head and no special priming is needed. If the liquid source is below the pump then either a priming chamber is needed or use of some sort of suction side valve, i.e. foot valve, to maintain prime in an open pumping system. If the inlet and outlet go into the same tank, i.e. re-circulating or filtering, and the lines are kept below the surface level, then after initial priming the system will maintain its prime.The two big considerations that must be given to horizontal pumps is priming method and NPSHa.Typical Centrifugal Horizontal pumps include mechanically sealed, magnetic coupled seal-less, self-priming, multistage, jet, back pullout, portable, API and ANSI to name a few.
View as List Grid

Items 151-160 of 2674

Set Descending Direction
per page
  1. AMT Pumps

    Stainless High Flow Centrifugal Pump

    4261-98

    $3,512.63
    Industrial Centrifugal pumps are suited for liquid and chemical transfer, salt water, heating and cooling, recirculation, booster service and other industrial applications. 316SS cast pump is better than bronze and at a lower price. Semi-open i...
    316 Stainless Steel 10HP 3phase Learn More
  2. Berkeley Pumps

    B11/2ZQLS-18 High Pressure pump Engine Driven

    B70287

    $14,000.00

    High Pressure pump Engine Driven .

    compact, designed with a minimum number of parts and no extra bearings to lubricate or replace. There is no coupling to maintain or align. Ideally suited for either high pressure fire irrigation or high flow was...

    Fire pump Berkeley 18HP Electric start Learn More
  3. March Pumps

    March Ryton Magdrive Pump

    TE-7R-MD 3PH 3/4HP

    $1,285.88

    March Series 7 magdrive totally enclosed pumps are the "workhorses" or the March product line. Ceramic spindle is standard. Drive magnet is separated from impeller magnet, preventing fluids from contacting the motor drive shaft, and allowing the m...

    3/4HP 230/460v Learn More
  4. March Pumps

    Kynar Magdrive Pump

    TE-7K-MD 3PH 1HP

    $2,027.25

    March Series 7 magdrive PVDF Kynar pumps are the "workhorses" or the March product line. Ceramic spindle is standard. Drive magnet is separated from impeller magnet, preventing fluids from contacting the motor drive shaft, and allowing the motor t...

    230/460v 1HP Kynar Learn More
  5. March Pumps

    Chemical March Pump

    TE-7K-MD 3PH 3/4HP

    $1,884.38

    Chemical Kynar Pump. March Series 7 magdrive totally enclosed pumps are the "workhorses" or the March product line. Kynar PVDF molded parts. Ceramic spindle is standard. Drive magnet is separated from impeller magnet, preventing fluids from contac...

    230/460v 3/4HP Kynar Learn More
  6. Berkeley Pumps

    B1WQS-9 High Pressure pump Engine Driven

    B72133

    $3,281.79
    High Pressure pump Engine Driven .

    compact, designed with a minimum number of parts and no extra bearings to lubricate or replace. There is no coupling to maintain or align. Ideally suited for either high pressure fire irrigation or high flow ...

  7. AMT Pumps

    Stainless Steel Centrifugal Pump

    368A-98

    $923.31
    Stainless steel pump is designed for continuous-duty low pressure OEM, Industrial/Commercial and General Service applications including circulation, chemical processing, Biodiesel mixing, liquid transfer and cooling.
    • Type 6 mechanical seal
    • ...
    115/230v 1/3HP TEFC Learn More
  8. EBARA Pumps

    Ebara pump Stainless

    2CDXU70/206S2

    $1,352.78
    Ebara stainless steel pump.High head pump, 2 stage designed for the applications where a on stage centrifugal just can't develop the head or pressure needed for the job. 2 HP, 230v/1 phase TEFC motor.
    2HP 230V TEFC Learn More
  9. EBARA Pumps

    SS 2stage 2hp

    2CDXU70/206T2

    $1,421.00
    2HP High head pump, 2 stage designed for the applications where a on stage centrifugal just can't develop the head or pressure needed for the job. booster pump 2 HP, 3 phase TEFC motor.
    2HP 230/460V TEFC Learn More
  10. EBARA Pumps

    SS 2stage 3 hp

    2CDXU120/306T2

    $1,796.85

    Ebara stainless pump. High head pump, 2 stage designed for the applications where a on stage centrifugal just can't develop the head or pressure needed for the job. 3 HP, 3 phase TEFC motor.

    3HP 230/460V TEFC Learn More
View as List Grid

Items 151-160 of 2674

Set Descending Direction
per page