Horizontal Pumps
Designed and meant to be used as a horizontally mounted assembly.
This includes feet on the pump, motor or both for securing the pump
and motor to its floor or structure. The most common type of
Horizontal pump is the End Suction, where the fluid enters the
front end of the casing and exits perpendicularly. The source of
liquid is either above the pump, in which case it is a positive
head and no special priming is needed. If the liquid source is
below the pump then either a priming chamber is needed or use of
some sort of suction side valve, i.e. foot valve, to maintain prime
in an open pumping system. If the inlet and outlet go into the same
tank, i.e. re-circulating or filtering, and the lines are kept
below the surface level, then after initial priming the system will
maintain its prime.The two big considerations that must be given to
horizontal pumps is priming method and NPSHa.Typical Centrifugal
Horizontal pumps include mechanically sealed, magnetic coupled
seal-less, self-priming, multistage, jet, back pullout, portable,
API and ANSI to name a few.
-
TrunkPump
PTO Trash Pump 4" for Tractor
TP-4PTR
$5,899.00PTO 4" tractor pumps work off the idea of Drive, Dip, Pump, and Go. A easy one person job now.PTO powered dewatering pump fits category one, 3-point hitch PTO powered @ 540 rpm. TrunkPump™ CS-4 - Custom Deep Draw Strainer for down to 1" Depth. ...4" PTO water pump 550GPM Learn More -
Berkeley Pumps
B3TPMS Centrifugal Pump 1.5HP/1ph
B54586
$5,214.00Berkeley B3TPMS pump B54586
The type B, pumps are built for continuous dependable performance and ease of repair. Ideal for transfer applications, standby fire protection, dewatering and irrigation. Flows to 550 GPM, Heads to 180 feet.
-
Flows...1.5HP Learn More
Berkeley Pumps
B3ZPMS Centrifugal Water Pump
B54605
$8,502.007.5HP Berkeley End suction centrifugal water pump,
close coupled with mechanical seal. Used for irrigation, fountains, spa, pools and other water transfer applications.
BERKELEY Close-Coupled End-Suction Pumps are ideal for most applications req...
230/460 7-1/2HP Learn More
Berkeley Pumps
B3ZRM Water Truck Pump
B66161
$4,769.00Berkeley Pump B3ZRM Type B frame mount pumps are designed for water trucks and for the user who has a separate power source suitable for driving through couplings or with belts PTO. Ideal for general purpose applications requiring high performance...
CALL FOR LOWEST $$$ CW Packed NPT Std Learn More
Berkeley Pumps
B3EPBL Centrifugal Water Pump
B58056
$24,065.00BERKELEY Close-Coupled End-Suction Pumps are ideal for most applications requiring high performance, easy maintenance and moderate initial cost. Cast Iron construction with unique back pull-out design permits access to the impeller without dist...460v 60HP ODP Learn More
Berkeley Pumps
Self Priming Pump
B82375
$10,803.00Self Priming pumps w/ optional hydraulic drive are built for continuous dependable performance and ease of repair. High lift designs allow suction lifts up to 25 feet at sea level. Ideal for water trucks, transfer applications, standby fire protec...B4ZRKS Opt. Hydraulic Learn More
Berkeley Pumps
B3TPMS Centrifugal Water Pump 7.5HP/3ph
B74757
$6,567.00End suction centrifugal pump, close coupled with mechanical seal. Used for irrigation, commercial swimming pool, commercial dishwasher lvo and other water transfer applications.7.5hp Learn More
MP Pumps
FM40 Engine Mount Pump
33354
$8,300.00Flomax 40 are self-priming pumps, pipe size 4" NPT. PUMPAK for Engine Drive. Used for irrigation, ship fire protection, and other water pump applications requiring high pressure and high flow. ENGINE NOT INCLUDED, use 18-50 HP.For engine drive mount CI Learn More
Griswold Pumps
Irrigation pump 7.5HP
75HHS TEFC
$9,424.00Irrigation pump, Heavy duty work horse. Griswold HH sturdy cast iron design with bronze impeller engineered for years of trouble free irrigation service. Self priming single phase 230v 7.5HP provides high flow water transfer.7-1/2HP 230v/1 TEFC 3" Learn More
Griswold Pumps
CI SP pump 7.5HP
75HHT TEFC
$7,726.00Cast Iron Self Priming Griswold pump. Heavy duty work horse. Sturdy cast iron design with bronze impeller engineered for years of trouble free irrigation service.7-1/2HP 230/460v TEFC Learn More -
