My Cart

Horizontal Pumps

Designed and meant to be used as a horizontally mounted assembly. This includes feet on the pump, motor or both for securing the pump and motor to its floor or structure. The most common type of Horizontal pump is the End Suction, where the fluid enters the front end of the casing and exits perpendicularly. The source of liquid is either above the pump, in which case it is a positive head and no special priming is needed. If the liquid source is below the pump then either a priming chamber is needed or use of some sort of suction side valve, i.e. foot valve, to maintain prime in an open pumping system. If the inlet and outlet go into the same tank, i.e. re-circulating or filtering, and the lines are kept below the surface level, then after initial priming the system will maintain its prime.The two big considerations that must be given to horizontal pumps is priming method and NPSHa.Typical Centrifugal Horizontal pumps include mechanically sealed, magnetic coupled seal-less, self-priming, multistage, jet, back pullout, portable, API and ANSI to name a few.
View as List Grid

Items 1-10 of 14

Set Descending Direction
per page
Page
  1. Berkeley Pumps

    Centrifugal Water Pump

    B58087

    25% Off Special Price $6,201.00 Regular Price $8,268.00
    B1-1/2PPMS Berkeley Pump End suction centrifugal pump, close coupled with mechanical seal. Water pump for irrigation, water transfer, industrial applications.
    10HP 230V/1 ODP Learn More
  2. Berkeley Pumps

    Centrifugal Water Pump

    B58088

    25% Off Special Price $5,127.00 Regular Price $6,836.00
    End suction centrifugal pump, close coupled with mechanical seal.
    10HP 230/460V ODP Learn More
  3. Berkeley Pumps

    B1-1/2ZPL (10HP - Single Phase - CI)

    B55574

    25% Off Special Price $6,997.50 Regular Price $9,330.00

    Berkeley B1-1/2ZPL B55574 water pump 10HP

    Berkeley Pumps offers a variety of models with the pump attached directly to the motor frame. Often used for irrigation.

    • All pumps offer back pull-out design
    • Impeller size is 9""
    • Cast Iron impeller
    • ...
    10HP 230/1 Packing Learn More
  4. Berkeley Pumps

    B1-1/2ZPL (10HP - Three Phase - CI)

    B53752

    25% Off Special Price $5,717.25 Regular Price $7,623.00
    Berkeley Pumps offers a variety of models with the pump attached directly to the motor frame.
    • All centrifugal pumps offer back pull-out design
    • Impeller size is trimmed
    • Berkeley Pump discharge size: 1.5"
    • Berkeley Pump suction size: 2"
    a...
    10HP 230/460V ODP PACKING Learn More
  5. Myers Pumps

    Frame Mtd. 2 Stage w/ motor

    I2CB-10M

    $9,220.00

    High Pressure centrifugal pumps

    Myers I2C, I2CI and I2CS Two-Stage Centrifugal pumps are designed and built for rugged continuous duty service. These high head (to 400 feet) medium capacity (to 140 GPM) are available in standard fitted (I2C), ...
  6. Myers Pumps

    Frame Mtd. 2 Stage w/ motor

    I2CB-10MT

    $10,660.00

    High pressure centrifugal Pump.

    Myers I2C, I2CI and I2CS Two-Stage Centrifugal pumps are designed and built for rugged continuous duty service. These high head (to 400 feet) medium capacity (to 140 GPM) are available in standard fitted (I2C), ...
  7. Myers Pumps

    Framed Mtd. 2 Stage w/ motor

    I2CIB-10MT

    $10,660.00

    Myers I2C, I2CI and I2CS Two-Stage Centrifugal pumps are designed and built for rugged continuous duty service. These high head (to 400 feet) medium capacity (to 140 GPM) are available in standard fitted (I2C), iron & bronze fitted (I2CI) epoxy c...

  8. Myers Pumps

    Framed Mtd.2 Stage w/ motor

    I2CIB-10M

    $9,130.00

    Myers I2C, I2CI and I2CS Two-Stage Centrifugal pumps are designed and built for rugged continuous duty service. These high head (to 400 feet) medium capacity (to 140 GPM) are available in standard fitted (I2C), iron & bronze fitted (I2CI) epoxy...

  9. EBARA Pumps

    SS Pump 10 HP

    A3U-32-200-1100T3C

    $4,007.52

    The EBARA Stainless Steel 3U Series Centrifugal Pumps are designed for dependability, performance and rugged continuous duty service under the most severe conditions. These pumps are guaranteed tough, engineered for the professional and built for ...

    10HP 208-230/460V TEFC Learn More
  10. EBARA Pumps

    SS Pump 10 HP ODP

    A3U-32-200-1100D1G

    $4,132.39
    EBARA Stainless Steel 3U Series Centrifugal Pumps are designed for dependability, performance and rugged continuous duty service under the most severe conditions. These pumps are guaranteed tough, engineered for the professional and built for ...
    10HP 230V ODP Learn More
View as List Grid

Items 1-10 of 14

Set Descending Direction
per page
Page