Horizontal Pumps
Designed and meant to be used as a horizontally mounted assembly.
This includes feet on the pump, motor or both for securing the pump
and motor to its floor or structure. The most common type of
Horizontal pump is the End Suction, where the fluid enters the
front end of the casing and exits perpendicularly. The source of
liquid is either above the pump, in which case it is a positive
head and no special priming is needed. If the liquid source is
below the pump then either a priming chamber is needed or use of
some sort of suction side valve, i.e. foot valve, to maintain prime
in an open pumping system. If the inlet and outlet go into the same
tank, i.e. re-circulating or filtering, and the lines are kept
below the surface level, then after initial priming the system will
maintain its prime.The two big considerations that must be given to
horizontal pumps is priming method and NPSHa.Typical Centrifugal
Horizontal pumps include mechanically sealed, magnetic coupled
seal-less, self-priming, multistage, jet, back pullout, portable,
API and ANSI to name a few.
-
Berkeley Pumps
B8GPBM Centrifugal Pump
B51798
$29,799.00The type B, pumps are built for continuous dependable performance and ease of repair. Ideal for transfer applications, standby fire protection, dewatering and irrigation. Flows to 3000 GPM, Heads to 60 feet.
-
Flows to 3000 GPM, Heads to 60 ...25HP 230/460v Learn More
Berkeley Pumps
B3ZPLS Centrifugal Water Pump
B70224
$14,202.00End suction centrifugal pump, close coupled with mechanical seal. Used for irrigation, fountains and other water transfer applications.25HP 230/460v/3 ODP Learn More
Berkeley Pumps
B3ZPLS Centrifugal Water Pump
B70230
$16,044.00End suction centrifugal pump, close coupled with mechanical seal. Used for irrigation, fountains and other water transfer applications.40HP 230/460v/3 ODP Learn More
Berkeley Pumps
B3JPBLS Centrifugal Water Pump
B74688
$15,522.00Berkley centrifugal pump, close coupled to a 25 HP electric motor. Use for irrigation, water features, water falls. ANSI 125# flat face flanges.25HP Learn More -
