Horizontal Pumps
Designed and meant to be used as a horizontally mounted assembly.
This includes feet on the pump, motor or both for securing the pump
and motor to its floor or structure. The most common type of
Horizontal pump is the End Suction, where the fluid enters the
front end of the casing and exits perpendicularly. The source of
liquid is either above the pump, in which case it is a positive
head and no special priming is needed. If the liquid source is
below the pump then either a priming chamber is needed or use of
some sort of suction side valve, i.e. foot valve, to maintain prime
in an open pumping system. If the inlet and outlet go into the same
tank, i.e. re-circulating or filtering, and the lines are kept
below the surface level, then after initial priming the system will
maintain its prime.The two big considerations that must be given to
horizontal pumps is priming method and NPSHa.Typical Centrifugal
Horizontal pumps include mechanically sealed, magnetic coupled
seal-less, self-priming, multistage, jet, back pullout, portable,
API and ANSI to name a few.
-
Oberdorfer Pumps
Bronze Close Coupled Centrifugal Pump
101MPS-10F57
$887.00Close coupled Bronze Centrifugal with motor.- All Bronze
- Marine Use
- Carbon Face Mechanical Pump Seal
- Explosion Proof Motors Available
- Will Handle Contaminated Liquids
- Extremely Quiet
- A Standard in the Marine Air Conditioning Industry
- Counter-Cloc...
-
Oberdorfer Pumps
Bronze Close Coupled Centrifugal Pump
104M-01F26
$1,163.00Close coupled Bronze Centrifugal with motor.- All Bronze
- Marine Use
- Carbon Face Mechanical Pump Seal
- Explosion Proof Motors Available
- Will Handle Contaminated Liquids
- Extremely Quiet
- A Standard in the Marine Air Conditioning Industry raw w...
115/230 Learn More -
March Pumps
PolyPro magdrive PUMP
TE-5.5C-MD 1PH 1/3HP
$1,002.00PolyPro magdrive PUMP. Involute design w/closed impeller magnet assembly. Chemical pumps for industrial process applications, aquariums, chillers and other clear liquids. Max. flow 30GPM. Head 41 ft. Temps. to 190F. 3.187 impeller.
Kidney dialysi...
115/230v TEFC motor Learn More -
Barnes Pumps
Barnes Pond pump 1/3hp
SFU31
$2,944.00Barnes pond Submersible pumps specially designed for use in decorative water fountain displays.
Brass construction, 4 and 6 vane open impeller. 304 stainless steel screen with screen area of 264 sq. in. wrap around. Discharge can rotate 90ï½...
115v Learn More -
March Pumps
PP PUMP
TE-5.5C-MD 3PH 1/3HP
$884.00Special Price;March Pump's industrial TE-5.5C-MD is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation, chemical transfer, and scrubber systems. It is capable of generating a maximum flow of... -
Oberdorfer Pumps
Bronze Marine Centrifugal Pump
104M-06F13
$1,009.00Bronze Marine Centrifugal Pump. Close coupled Bronze Centrifugal with motor. Popular cooling water pump for marine AC units.- All Bronze
- Marine Use
- Carbon Face Mechanical Pump Seal
- Explosion Proof Motors Available
- Will Handle Contaminated Liquids...
1/3HP 115/230v Learn More -
Oberdorfer Pumps
Bronze Close Coupled Centrifugal Pump
104M-06F26
$1,163.00Close coupled Bronze Centrifugal with motor.- All Bronze
- Marine Use
- Carbon Face Mechanical Pump Seal
- Explosion Proof Motors Available
- Will Handle Contaminated Liquids
- Extremely Quiet
- A Standard in the Marine Air Conditioning Industry
- Counter-Cloc...
-
Oberdorfer Pumps
Bronze Close Coupled Centrifugal Pump
104M-F13
$897.00Close coupled Bronze Centrifugal with motor.- All Bronze
- Marine Use
- Carbon Face Mechanical Pump Seal
- Explosion Proof Motors Available
- Will Handle Contaminated Liquids
- Extremely Quiet
- A Standard in the Marine Air Conditioning Industry
- Counter-Cloc...
-
Oberdorfer Pumps
Bronze Close Coupled Centrifugal Pump
104M-F21
$1,396.00Close coupled Bronze Centrifugal with motor.- All Bronze
- Marine Use
- Carbon Face Mechanical Pump Seal
- Explosion Proof Motors Available
- Will Handle Contaminated Liquids
- Extremely Quiet
- A Standard in the Marine Air Conditioning Industry
- Counter-Cloc...
-
March Pumps
PolyPro PUMP
TE-5.5C-MD-AC 1PH
$890.00March TE5.5 magnetic pump. Involute design w/closed impeller magnet assembly. Max. flow 30GPM. Head 41 ft. Temps. to 190F. 3.187 impeller . This pump has a A/C motor 50/60 HZ.Pump can be fitted with optional priming chamber to provide self-pr...
115/230v ODP motor Learn More