My Cart

Horizontal Pumps

Designed and meant to be used as a horizontally mounted assembly. This includes feet on the pump, motor or both for securing the pump and motor to its floor or structure. The most common type of Horizontal pump is the End Suction, where the fluid enters the front end of the casing and exits perpendicularly. The source of liquid is either above the pump, in which case it is a positive head and no special priming is needed. If the liquid source is below the pump then either a priming chamber is needed or use of some sort of suction side valve, i.e. foot valve, to maintain prime in an open pumping system. If the inlet and outlet go into the same tank, i.e. re-circulating or filtering, and the lines are kept below the surface level, then after initial priming the system will maintain its prime.The two big considerations that must be given to horizontal pumps is priming method and NPSHa.Typical Centrifugal Horizontal pumps include mechanically sealed, magnetic coupled seal-less, self-priming, multistage, jet, back pullout, portable, API and ANSI to name a few.
View as List Grid

Items 1-10 of 23

Set Descending Direction
per page
Page
  1. March Pumps

    Magnetic pump electric Explosion Proof

    TE-5.5C-MD XP 1PH 1/3HP

    $1,883.00

    Stainless Steel magnetic pump and electric Explosion proof motor. OBSOLETE see 0151-0113-0100. Chemical pumps for industrial process, photo, solvents, and other clear liquid applications. Max. flow 30GPM. Head 41 ft. Temps. to 250F. 3.187 impeller...

    115/230v OBS Learn More
  2. Calpeda Pumps

    Clear water pump

    CT60 03A16S

    $307.97

    Calpeda Pump: Turbine pump for clean liquids, Clear water pump, without abrasives, without suspended solids, non-explosive, non-aggressive for the pump materials. Heavy duty Peripheral pump. Works with high pressure soaker drip hoses irrigation, d...

    1/3HP 1" 115v/1 Learn More
  3. Pedrollo Pumps

    Turbo Drainer

    TDPK03 Turbo Drainer

    $209.09
    Turbine Pump, Peripheral pump.

    They are recommended for pumping clean water without abrasive particles and liquids that are chemically non aggressive to the materialsfrom which the pump is made. FOR THEIR RELIABILITY, SIMPLICITY OF USE AND ECONOM...

    115v Learn More
  4. Oberdorfer Pumps

    Bronze SP pump 1/3 hp

    300B-F13

    $1,517.10
    Bronze self priming pump with 1/3 hp motor. Mounts to a NEMA 56J motor with a threaded shaft SS. Self priming / suction lift to 20 feet. (15 ft without a foot or check valve)

    Bronze models - Ideal for marine service ( air conditioning, bilge, and...

    115v Learn More
  5. Hypro Pumps

    Cast Iron centrifugal Pump

    COMCB11

    $843.00

    Hypro Cast Iron pump, centrifugal pump. Designed for continuous-duty low pressure OEM, Industrial Commercial and General Service applications including circulation,  liquid transfer and cooling. Designed for continuous low-pressure circulation and...

    1/3HP ODP Learn More
  6. AMT Pumps

    Self-Priming 1" Electric Pump

    2851-95

    $661.00

    Self-priming 1" Cast Iron electric pumps

    designed for circulating, boosting, washdown, liquid transfer and dewatering applications. The centerline discharge feature is specifically designed to prevent vapor binding and makes for convenient piping...

    1/3 115/230v ODP 1" Learn More
  7. AMT Pumps

    Self-Priming Water Pump

    2851-96

    $662.00

    Water Pump. The AMT Self-priming Aluminum Centrifugal utility pumps are designed for circulating, boosting, washdown, liquid transfer and dewatering applications. Use for emergency water supply, storm drains, pool / spa drainage and select chemica...

    115v 1/3HP ODP Learn More
  8. March Pumps

    PolyPro magdrive PUMP

    TE-5.5C-MD 1PH 1/3HP

    $1,002.00

    PolyPro magdrive PUMP. Involute design w/closed impeller magnet assembly. Chemical pumps for industrial process applications, aquariums, chillers and other clear liquids. Max. flow 30GPM. Head 41 ft. Temps. to 190F. 3.187 impeller.

    Kidney dialysi...

    115/230v TEFC motor Learn More
  9. March Pumps

    PP PUMP

    TE-5.5C-MD 3PH 1/3HP

    $884.00
    Special Price;March Pump's industrial TE-5.5C-MD is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation, chemical transfer, and scrubber systems. It is capable of generating a maximum flow of...
  10. March Pumps

    PolyPro PUMP

    TE-5.5C-MD-AC 1PH

    $890.00
    March TE5.5 magnetic pump. Involute design w/closed impeller magnet assembly. Max. flow 30GPM. Head 41 ft. Temps. to 190F. 3.187 impeller . This pump has a A/C motor 50/60 HZ.

    Pump can be fitted with optional priming chamber to provide self-pr...

    115/230v ODP motor Learn More
View as List Grid

Items 1-10 of 23

Set Descending Direction
per page
Page