Horizontal Pumps
Designed and meant to be used as a horizontally mounted assembly.
This includes feet on the pump, motor or both for securing the pump
and motor to its floor or structure. The most common type of
Horizontal pump is the End Suction, where the fluid enters the
front end of the casing and exits perpendicularly. The source of
liquid is either above the pump, in which case it is a positive
head and no special priming is needed. If the liquid source is
below the pump then either a priming chamber is needed or use of
some sort of suction side valve, i.e. foot valve, to maintain prime
in an open pumping system. If the inlet and outlet go into the same
tank, i.e. re-circulating or filtering, and the lines are kept
below the surface level, then after initial priming the system will
maintain its prime.The two big considerations that must be given to
horizontal pumps is priming method and NPSHa.Typical Centrifugal
Horizontal pumps include mechanically sealed, magnetic coupled
seal-less, self-priming, multistage, jet, back pullout, portable,
API and ANSI to name a few.
-
AMT Pumps
Stainless Steel Centrifugal Pump
370C-98
20% Off Special Price $726.40 Regular Price $908.00Designed for continuous-duty low pressure OEM, Industrial/Commercial and General Service applications including circulation, chemical processing, liquid transfer and cooling. Bodth single & three phase ODP or TEFC motors available up to 2HP. ...230/460v 3/4HP TEFC Learn More -
AMT Pumps
Cast Iron 3/4hp Pump
370A-95
23% Off Special Price $488.18 Regular Price $634.00Designed for continuous-duty low pressure OEM, Industrial/Commercial and General Service applications including circulation, chemical processing, liquid transfer and cooling. single phase TEFC motor.See Curve D
Series: Centrifugal Pumps ...115/230v 3/4HP TEFC Learn MoreMTH Pumps
Turbine Pump 3/4HP
T41BSS753TV
$3,524.71Mechanically sealled regenerative turbines for low flow high pressure applications. Serving a wide variety of markets and industries including boiler feed, condensate return, chillers / temperature controllers, refrigeration, petroleum, as well a...MTH Pumps
Turbine Pump 3/4HP
T41BSS751TV
$3,457.58Mechanically sealled regenerative turbines for low flow high pressure applications. Serving a wide variety of markets and industries including boiler feed, condensate return, chillers / temperature controllers, refrigeration, petroleum, as well a...MTH Pumps
Turbine Pump 3/4HP
T41BSS753EV
$3,841.93Mechanically sealled regenerative turbines for low flow high pressure applications. Serving a wide variety of markets and industries including boiler feed, condensate return, chillers / temperature controllers, refrigeration, petroleum, as well a...MTH Pumps
Turbine Pump 3/4HP
T41BSS751EV
$3,868.79Mechanically sealled regenerative turbines for low flow high pressure applications. Serving a wide variety of markets and industries including boiler feed, condensate return, chillers / temperature controllers, refrigeration, petroleum, as well...Turbine Pump 3/4HP /1ph, Explosion proof Learn MoreMP Pumps
Series 30 w/ motor
25457
$1,320.00Series 30 End Suction Centrifugal Pump uses a close-coupled Cast Iron Electric Motor-0.75 HP, 3-phase, 230/460 V. The pump has 1" NPT suction and 0.75" NPT horizontal or vertical discharge.MP Pumps
MP Centrifugal pump
22731
$1,020.00MP Centrifugal pump. Series 30 End Suction Centrifugal Pump uses a close-coupled Cast Iron Electric Motor-0.75 HP, 3-phase, 230/460 V. The pump has 1" NPT suction and 0.75" NPT horizontal or vertical discharge.
American made cast iron transfer p...
3/4HP 230/460v TEFC Learn MoreMP Pumps
Series 30 w/ motor
26542
$1,430.00Series 30 End Suction Centrifugal Pump uses a close-coupled Cast Iron Electric Motor-0.75 HP, 3-phase, 230/460 V. The pump has 1" NPT suction and 0.75" NPT horizontal or vertical discharge.MP Pumps
Series 30 w/ motor
22771
$1,200.00Series 30 End Suction Centrifugal Pump uses a close-coupled Cast Iron Electric Motor-0.75 HP, 3-phase, 230/460 V. The pump has 1" NPT suction and 0.75" NPT horizontal or vertical discharge.