Horizontal Pumps
Designed and meant to be used as a horizontally mounted assembly.
This includes feet on the pump, motor or both for securing the pump
and motor to its floor or structure. The most common type of
Horizontal pump is the End Suction, where the fluid enters the
front end of the casing and exits perpendicularly. The source of
liquid is either above the pump, in which case it is a positive
head and no special priming is needed. If the liquid source is
below the pump then either a priming chamber is needed or use of
some sort of suction side valve, i.e. foot valve, to maintain prime
in an open pumping system. If the inlet and outlet go into the same
tank, i.e. re-circulating or filtering, and the lines are kept
below the surface level, then after initial priming the system will
maintain its prime.The two big considerations that must be given to
horizontal pumps is priming method and NPSHa.Typical Centrifugal
Horizontal pumps include mechanically sealed, magnetic coupled
seal-less, self-priming, multistage, jet, back pullout, portable,
API and ANSI to name a few.
-
American Stainless
SS Pump & Motor
C14315B1T1-1-WG
$1,506.55SSPC pumps have a one-piece shell, capable of supporting the pump and motor weight in a vertically mounted position. All pump parts including the base are 304 SS. The internal design also prevents any air from being trapped in the pump case when ...1HP 115/230V TEFC Learn More -
MP Pumps
Series 60 w/ motor
27675
$1,700.00MP Series 60 End Suction Centrifugal Pump. 1.25" NPT suction and 1" NPT horizontal/vertical discharge. Electric Motor Driven Pump using a Close-Coupled Cast Iron Electric Motor - 1 HP, 3-phase, 230/460 V, 3450 RPM. The pumps are right hand rota...1HP 230/460v TEFC Learn More -
MP Pumps
Series 60 w/ motor
27674
$1,750.00Series 60 End Suction Centrifugal Pump. 1.25" NPT suction and 1" NPT horizontal/vertical discharge. Electric Motor Driven Pump using a Close-Coupled Cast Iron Electric Motor - 1 HP, 1-phase, 115/230 V, 3450 RPM. The pumps are right hand rotatio...1HP 115/230v Learn More -
MP Pumps
Series 30 w/ motor
22839
$1,030.00Series 30 End Suction Centrifugal Pump uses a close-coupled Cast Iron Electric Motor-1 HP, 3-phase, 230/460 V. The pump has 1" NPT suction and 0.75" NPT horizontal or vertical discharge. -
MP Pumps
Series 30 w/ motor
25434
$690.80Series 30 End Suction Centrifugal Pump uses a close-coupled Cast Iron Electric Motor-1 HP, 3-phase, 230/460 V. The pump has 1" NPT suction and 0.75" NPT horizontal or vertical discharge. -
MP Pumps
Series 110 w/ motor
26545
$1,500.00Series 110 End Suction Centrifugal Pump. 1.5" NPT suction and 1.25" NPT vertical or horizontal discharge. Close-coupled Cast Iron Electric Motor-1HP, 3450 RPM. -
Flotec Pumps
Stainless Steel Sprinkler Utility Pump
2825SS-01
$349.00Features:- Stainless Steel Pump Housing
- Continuous duty rated 1 HP, 115 Volt motor , 3,450 RPM
- Permanently lubricated Bearings mean no maintenance problems
- Completely portable; pump mounted on stand with handle
- Factory installed 6' power cord wit...
Simer sprinkler pump Learn More -
MP Pumps
FM 8 w/ Motor 1725
33466
$1,310.00Flomax 8 are self-priming pumps, pipe size 2" NPT. Electric Motor Driven Pump using a Close-Coupled Cast Iron Electric Motor-1 HP1HP 230/460v 1725RPM CI Learn More -
Hypro Pumps
316Stainless Steel pump 1HP
COMSV343T
$670.001HP 316 Stainless Steel investment cast end-suction centrifugal pump. Used in commercial applications from chillers to commercial cleaning machines and chemical transfer.
This series of low pressure general transfer pumps are also available in C...
230/460v/3 TEFC Learn More -
AMT Pumps
High Pressure Cast Iron Centrifugal Pump
489F-95
$768.00High pressure - head Centrifugal Pump. Designed for continuous duty, high pressure, high flow, general service water circulation and transfer (boosting water in high rise apartments, hotels & office buildings, circulation of hot & chilled water...1HP 3-Phase TEFC motor Learn More