My Cart

Horizontal Pumps

Designed and meant to be used as a horizontally mounted assembly. This includes feet on the pump, motor or both for securing the pump and motor to its floor or structure. The most common type of Horizontal pump is the End Suction, where the fluid enters the front end of the casing and exits perpendicularly. The source of liquid is either above the pump, in which case it is a positive head and no special priming is needed. If the liquid source is below the pump then either a priming chamber is needed or use of some sort of suction side valve, i.e. foot valve, to maintain prime in an open pumping system. If the inlet and outlet go into the same tank, i.e. re-circulating or filtering, and the lines are kept below the surface level, then after initial priming the system will maintain its prime.The two big considerations that must be given to horizontal pumps is priming method and NPSHa.Typical Centrifugal Horizontal pumps include mechanically sealed, magnetic coupled seal-less, self-priming, multistage, jet, back pullout, portable, API and ANSI to name a few.
View as List Grid

Items 1-10 of 30

Set Descending Direction
per page
Page
  1. AMT Pumps

    High Volume SS Straight Centrifugal Pump

    5483-98

    20% Off Special Price $688.80 Regular Price $861.00

    AMT Stainless Steel Straight Centrifugal pump is designed for continuous duty high flow and high pressure applications including chemical processing, liquid transfer, cooling, pressure boosting, circulating and applications requiring contaminant f...

    1 HP 230v/460v HV Learn More
  2. AMT Pumps

    CI Centrifugal

    282C-95

    23% Off Special Price $726.11 Regular Price $943.00

    This line of AMT Self-priming Solids Handling pumps is designed for Industrial and Commercial applications requiring high volume liquid transfer, waste water drainage and processing.

    These pumps feature self-cleaning clog resistant impeller capab...

    115/230v 1HP TEFC Learn More
  3. March Pumps

    316SS Magdrive Beer Pump

    TE-7SSB-MD 1PH 1HP

    15% Off Special Price $2,359.60 Regular Price $2,776.00

    March 316SS Magdrive Beer Pump.

    TE-7SSB-MD 3Ph 1HP Beer Pump. Magnetic totally enclosed pumps are the "workhorses" or the March product line. Ceramic spindle is standard. 

    • Applications:
      • Beer making

    Replaces 0155-0249-0800, 0155-0249-...

    115/230v Learn More
  4. March Pumps

    316SS March 7 Magdrive Pump

    TE-7S-MD 1PH 1HP

    15% Off Special Price $2,439.50 Regular Price $2,870.00

    316SS March Series 7 magdrive pump.

    Magnetic totally enclosed pumps are the "workhorses" or the March product line. Ceramic spindle is standard. Contact us for additional materials, port sizes, or motors for EXP requirements.

    • Applications:
        ...
    115/230v TEFC Learn More
  5. March Pumps

    Kynar Magdrive Pump

    TE-7K-MD 3PH 1HP

    15% Off Special Price $1,311.55 Regular Price $1,543.00

    March Series 7 magdrive PVDF Kynar pumps are the "workhorses" or the March product line. Ceramic spindle is standard. Drive magnet is separated from impeller magnet, preventing fluids from contacting the motor drive shaft, and allowing the motor t...

    230/460v 1HP Kynar Learn More
  6. Finish Thompson Pumps (FTI)

    DB Magnetic pump

    DB10P-M218

    $1,681.00
    Magnetic coupled pump. Introducing the DB series magnetic drive pump—the new standard for high hydraulic efficiency and corrosive fluid handling. With computer design-aided magnetic flux and computational fluid dynamics technology, the DB serie...
    1HP 115/230v Polypro Learn More
  7. Finish Thompson Pumps (FTI)

    Magnetic coupled pump

    DB10P-M207

    $1,421.30
    Magnetic coupled pump.
    • Five-year warranty
    • Extended run dry ability (with carbon bushing)
    • High operating efficiency —Up to 70%
    • Polypropylene construction
    • Powerful neodymium magnets
    • Close-coupled design
    • Horizontal or vertical installation w...
    1.5HP 230/460v Learn More
  8. MP Pumps

    Series 110 w/ motor

    26545

    $1,500.00
    Series 110 End Suction Centrifugal Pump. 1.5" NPT suction and 1.25" NPT vertical or horizontal discharge. Close-coupled Cast Iron Electric Motor-1HP, 3450 RPM.
  9. Webtrol

    Corrosion Resistant Pump

    PC100R-T

    $2,539.35
    • Glass Reinforced Noryl
    • Close coupled
    • Ability to rotate the discharge in 90 degree increments.
    • 316 stainless steel impeller insert & wear ring
    1HP 115/230V TEFC Learn More
  10. Webtrol

    Corrosion Resistant Pump

    PC100R-3PH-T

    $2,735.73
    • Glass Reinforced Noryl
    • Close coupled
    • Ability to rotate the discharge in 90 degree increments.
    • 316 stainless steel impeller insert & wear ring
    1HP 208-230/460V TEFC Learn More
View as List Grid

Items 1-10 of 30

Set Descending Direction
per page
Page