Horizontal Pumps
Designed and meant to be used as a horizontally mounted assembly.
This includes feet on the pump, motor or both for securing the pump
and motor to its floor or structure. The most common type of
Horizontal pump is the End Suction, where the fluid enters the
front end of the casing and exits perpendicularly. The source of
liquid is either above the pump, in which case it is a positive
head and no special priming is needed. If the liquid source is
below the pump then either a priming chamber is needed or use of
some sort of suction side valve, i.e. foot valve, to maintain prime
in an open pumping system. If the inlet and outlet go into the same
tank, i.e. re-circulating or filtering, and the lines are kept
below the surface level, then after initial priming the system will
maintain its prime.The two big considerations that must be given to
horizontal pumps is priming method and NPSHa.Typical Centrifugal
Horizontal pumps include mechanically sealed, magnetic coupled
seal-less, self-priming, multistage, jet, back pullout, portable,
API and ANSI to name a few.
-
Sta-Rite
J Centrifugal Pump Med Head 1-1/2HP
JMF-40L
$1,499.00This pump has a heavy-duty cast iron construction with Noryl impeller.- Applications: Water systems and sprinkling for homes, farms and industry
- Drain Port: Provided for easy winterizing
- Easy Serviceability: Includes replaceable wear ring an...
115/230v Learn More -
Sta-Rite
JB Centrifugal Pump High Head 1-1/2HP
JBHF-51S
$1,917.00This pump has a heavy-duty cast iron construction with silicon bronze impeller.- Applications: Water systems and sprinkling for homes, farms and industry
- Drain Port: Provided for easy winterizing
- Easy Serviceability: Includes replaceable wea...
-
Sta-Rite
Convertible Jet Pump 1.5HP
PLF
$1,349.04Convertible Jet Pump, used for shallow or deep water well. Also used as a lawn sprinkler pump. The performance-proven PL Series is constructed to be lightweight and extremely resistant to sand and abrasive wear, it performs best on all deep wel...115/230v Learn More -
Sta-Rite
JB Centrifugal Pump Med Head 1-1/2HP
JBMF-40S
$2,270.00This pump has a heavy-duty cast iron construction with silicon bronze impeller.- Applications: Water systems and sprinkling for homes, farms and industry
- Drain Port: Provided for easy winterizing
- Easy Serviceability: Includes replaceable w...
-
Sta-Rite
1.5HP Irrigation Pump
DHF-51L
$1,796.00Electric Irrigation pump of also used for home fire protection pump systems. High Head Self-priming centrifugal pump for irrigation, fire protection, marine and liquid transfer. Cast iron construction with Noryl enclosed impeller. Includes drain p...
115/230v Learn More -
Sta-Rite
Booster Pump
HP20F-02
$2,549.00This Booster Pump is the most durable booster pump available. The patented SignaSeal™ floating impeller design minimizes thrust loads allowing for continuous operation without damage to motor bearings, mechanical seal or pump hydraulic componen...1-1/2HP 1" 115/230v Learn More -
Sta-Rite
Booster Pump
HPS20F-01
$3,251.00Stainless Steel Booster Pump is the most durable booster pump available. The patented SignaSeal™ floating impeller design minimizes thrust loads allowing for continuous operation without damage to motor bearings, mechanical seal or pump hydraul...1-1/2HP 1" 115/230v Stainless Learn More -
Sta-Rite
Booster Pump MGP
MGP20F
$1,494.68This MGP Booster Pump is the most durable booster pump available. The patented SignaSeal™ floating impeller design minimizes thrust loads allowing for continuous operation without damage to motor bearings, mechanical seal or pump hydraulic compon... -
Sta-Rite
Booster Pump SS
HPS10F3-01
$3,596.00This Booster Pump is the most durable booster pump available. SS Pump Body. The patented SignaSeal™ floating impeller design minimizes thrust loads allowing for continuous operation without damage to motor bearings, mechanical seal or pump hydrau... -
Sta-Rite
1 1/2 HP Sprinkler Pump
BPDH15
$1,497.00Quick priming PD2HF Series Pumps feature lightweight construction in a selfpriming design. These models offer a stronger pump body with reinforcement ribs and also a new 2" suction that is designed for the professional pump contractor
- 1-phase, ...
1.5HP Learn More
