Horizontal Pumps
Designed and meant to be used as a horizontally mounted assembly.
This includes feet on the pump, motor or both for securing the pump
and motor to its floor or structure. The most common type of
Horizontal pump is the End Suction, where the fluid enters the
front end of the casing and exits perpendicularly. The source of
liquid is either above the pump, in which case it is a positive
head and no special priming is needed. If the liquid source is
below the pump then either a priming chamber is needed or use of
some sort of suction side valve, i.e. foot valve, to maintain prime
in an open pumping system. If the inlet and outlet go into the same
tank, i.e. re-circulating or filtering, and the lines are kept
below the surface level, then after initial priming the system will
maintain its prime.The two big considerations that must be given to
horizontal pumps is priming method and NPSHa.Typical Centrifugal
Horizontal pumps include mechanically sealed, magnetic coupled
seal-less, self-priming, multistage, jet, back pullout, portable,
API and ANSI to name a few.
-
Sta-Rite
J Centrifugal Pump Med Head 1-1/2HP
JMF3-40
25% Off Special Price $1,281.75 Regular Price $1,709.00This pump has a heavy-duty cast iron construction with Noryl impeller.- Applications: Water systems and sprinkling for homes, farms and industry
- Drain Port: Provided for easy winterizing
- Easy Serviceability: Includes replaceable wear ring and fea...
230/460v Learn More -
Sta-Rite
JB Centrifugal Pump Med Head 1-1/2HP
JBMF3-40S
25% Off Special Price $1,421.25 Regular Price $1,895.00This pump has a heavy-duty cast iron construction with silicon bronze impeller.- Applications: Water systems and sprinkling for homes, farms and industry
- Drain Port: Provided for easy winterizing
- Easy Serviceability: Includes replaceable wear rin...
-
Hypro Pumps
316SS pump 1.5HP
COMSV453T
$1,399.061.5HP three phase electric 316 SScast end-suction centrifugal pump.
This series of low pressure general transfer pumps are also available in Cast Iron and Bronze with single and three phase electric motors. Explosion Proof and TEFC motors availa...
1.5HP 230/460v TEFC Learn More -
Hypro Pumps
Corrosion Resistant PolyPro Pump
CHMPB453T
$1,117.86Corrosion Resistant Polypropylene Centrifugal pumps. Close coupled to a NEMA 56J electric motor. Great for plating solutions, fume scrubbers, chillers, ponds, fountains and waste treatment, parts washers, chemical transfer, pools, spas, solvent r... -
MP Pumps
CHEMFLO 1
31114
$2,080.00Chemflo 1 -316 stainless pump and motor. Trimmed 3.6" diameter impeller.
CF1 Features:
- Investment-Cast, 316 Stainless Steel is Stronger than Stamped/Formed 304
- Standard Front Facing
- Standard Type 2100 Mechanical Seal
- Optional Teflon Type 9 ...
230/460v/3 1-1/2HP Learn More -
RS Corcoran
Hazardous-Location Centrifugal Pump
2000D 1.5HP EXP
$4,225.00Built for pumping chemicals and corrosives in hazardous locations, these Type 316 stainless steel pumps have a motor that's UL listed and CSA certified for use in Class I, Groups C & D and Class II, Groups F & G locations, unless noted. They have ...
230/460v Fuel Pump Learn More
