My Cart

Horizontal Pumps

Designed and meant to be used as a horizontally mounted assembly. This includes feet on the pump, motor or both for securing the pump and motor to its floor or structure. The most common type of Horizontal pump is the End Suction, where the fluid enters the front end of the casing and exits perpendicularly. The source of liquid is either above the pump, in which case it is a positive head and no special priming is needed. If the liquid source is below the pump then either a priming chamber is needed or use of some sort of suction side valve, i.e. foot valve, to maintain prime in an open pumping system. If the inlet and outlet go into the same tank, i.e. re-circulating or filtering, and the lines are kept below the surface level, then after initial priming the system will maintain its prime.The two big considerations that must be given to horizontal pumps is priming method and NPSHa.Typical Centrifugal Horizontal pumps include mechanically sealed, magnetic coupled seal-less, self-priming, multistage, jet, back pullout, portable, API and ANSI to name a few.
View as List Grid

Items 91-100 of 255

Set Descending Direction
per page
  1. Pacer Pumps

    NSF Water Pump

    IPW2WL-D3.0C

    $1,950.00

    NSF Sanitary potable water & Food Grade electric pump.

    Self-Priming SS Centrifugal Pumps, Pump casing is made of 304 stainless steel. Internal parts are glass reinforced polypropylene. All pumps include a built-in check valve.

    These pumps are st...

    3HP 230/460v/3 Stainless 2" Learn More
  2. Finish Thompson Pumps (FTI)

    Magnetic coupled pump Polypro

    DB15P-2-M209

    $2,919.40
    FTI DB15P-2-M209 Magnetic coupled pump. Finish Thompson chemical pump with superior sealless design.
    • Five-year warranty
    • Extended run dry ability (with carbon bushing)
    • High operating efficiency —Up to 70%
    • Polypropylene construction
    • Powerful ...
    3HP 230/460v 56C Learn More
  3. AMT Pumps

    MSV3 3 HP 19 stage pump

    MSV3-19-3P

    25% Off Special Price $1,446.00 Regular Price $1,928.00

    3HP Multistage Vertical booster pump, 5 stages. Commercial / industrial centrifugal pumps, (gravity feed) units designed to handle high-pressure low flow liquid transfer applications where no suction lift is required. Typical installations include...

    3HP 230/460v Learn More
  4. Pacer Pumps

    Centrifugal Pump

    SE2HL-D3.0C

    15% Off Special Price $1,009.80 Regular Price $1,188.00

    Pacer S pump 58-12H4 D3.0C close coupled to a TEFC 3hp motor. Self priming FRP plastic resists abrasive particles, good for most water transfer applications. Widely used to transfer and spray de-icing / anti-icing solutions, such as calcium chlori...

    3HP 230/460v EPDM Learn More
  5. AMT Pumps

    Self Priming CI Pump

    2SP30C-1P

    20% Off Special Price $1,028.00 Regular Price $1,285.00

    3HP CI Self-priming pump.

    Heavy duty American made pump for circulating, liquid transfer and dewatering applications. This line of AMT Self-Priming Centrifugal pumps is designed for industrial and commercial applications requiring high volume liq...

    3HP 1 phase Learn More
  6. MP Pumps

    Series 80 w/ motor

    35637

    $2,251.00
    MP Series 80 End Suction Centrifugal Pump. 1.25" NPT suction and 1" NPT horizontal/vertical discharge. Electric Motor Driven Pump using a Close-Coupled Cast Iron Electric Motor - 3 HP, 3-phase, 230/460 V, 3450 RPM. The pumps are right hand rota...
    3HP 230/460v Exp Learn More
  7. Finish Thompson Pumps (FTI)

    Magnetic coupled pump Polypro

    DB15P-2-M211

    $3,434.72
    FTI DB15P-2-M211 Magnetic coupled pump. Finish Thompson chemical pump with superior sealless design.
    • Five-year warranty
    • Extended run dry ability (with carbon bushing)
    • High operating efficiency —Up to 70%
    • Polypropylene construction
    • Powerful ...
    3HP 230/460v 182TC Learn More
  8. Pacer Pumps

    Centrifugal Pump

    SE2HB-D3.0C

    $1,064.00

    Pacer S pump 58-12H4 D3.0C close coupled to a TEFC 3hp motor. Self priming FRP plastic resists abrasive particles, good for most water transfer applications. Widely used to transfer and spray de-icing / anti-icing solutions, such as calcium chlori...

    3HP 230/460v Learn More
  9. MP Pumps

    HTO 80 Pump 3HP

    33077

    $3,387.00

    Centrifugal Hot Oil Pump :

    HTO80PMP D:3-3 56C 5.9 HD VERT MT BOX

    • Applications: Hot Oil, Heat Transfer Fluid, Asphalt plants, Plastics, Chemical, Food, and Processing Industries which require pumping of high temperature fluids. The HTO is used ...
    3HP 230/460v Learn More
  10. Pacer Pumps

    Centrifugal Pump

    SE2HL-C3.0C

    15% Off Special Price $1,484.10 Regular Price $1,746.00

    Pacer S pump 58-12H4 C3.0C close coupled to a TEFC 3hp motor.

    Self priming FRP plastic resists abrasive particles, good for most water transfer applications. Widely used to transfer and spray de-icing / anti-icing solutions, such as calcium chlor...

    3HP 230v/1 Learn More
View as List Grid

Items 91-100 of 255

Set Descending Direction
per page