My Cart

Horizontal Pumps

Designed and meant to be used as a horizontally mounted assembly. This includes feet on the pump, motor or both for securing the pump and motor to its floor or structure. The most common type of Horizontal pump is the End Suction, where the fluid enters the front end of the casing and exits perpendicularly. The source of liquid is either above the pump, in which case it is a positive head and no special priming is needed. If the liquid source is below the pump then either a priming chamber is needed or use of some sort of suction side valve, i.e. foot valve, to maintain prime in an open pumping system. If the inlet and outlet go into the same tank, i.e. re-circulating or filtering, and the lines are kept below the surface level, then after initial priming the system will maintain its prime.The two big considerations that must be given to horizontal pumps is priming method and NPSHa.Typical Centrifugal Horizontal pumps include mechanically sealed, magnetic coupled seal-less, self-priming, multistage, jet, back pullout, portable, API and ANSI to name a few.
View as List Grid

Items 81-90 of 203

Set Descending Direction
per page
  1. Myers Pumps

    Frame Mtd. 2 Stage w/ motor

    I2CB-5M

    $9,320.00

    Myers I2C, I2CI and I2CS Two-Stage Centrifugal pumps are designed and built for rugged continuous duty service. These high head (to 400 feet) medium capacity (to 140 GPM) are available in standard fitted (I2C), iron & bronze fitted (I2CI) epoxy...

  2. Koshin Pumps

    Water Pump Gas 2 inch

    SEV-50X

    $455.00

    Water Pump gas engine 2 inch. All aluminum die cast pump housing, with Cast Iron impeller and volute for wear resistance, lightweight and portability. Metal Carry handle and base. Koshin 4-cycle engine. 4-Cycle engine so NO mixing gas. Use standar...

    4-Cycle 5HP 9840 GPH 3-year warranty Learn More
  3. Koshin Pumps

    High Pressure Water Fire Pump 2 inch Honda

    Pump-In-A-Bag

    $1,758.90
    High Pressure water Pump 2 inch Honda. Koshin Pump with Honda engine Water Pump 2 inch. All aluminum die cast pump housing, impeller and volute for lightweight and portability. Metal Carry handle and base. Honda GX160 4-cycle engine. 4-Cycle engi...
    Honda GX160 5HP 7000GPH SERH-50B Learn More
  4. Pacer Pumps

    SE2UB-E5HOC 2" Pacer water Pump

    58-12U4 E5HOC

    $944.15
    Pacer series S water pump. Solid FRP construction. Centrifugal Horizontal Mechanical Sealed Pump (Self-Priming), with gasoline engine. Great pump for contractors removing water from basements, ditches, dike, swimming pools or anywhere a large v...
    Honda GC160 Learn More
  5. Pacer Pumps

    SE3LL C5.0C

    58-13L4 C5.0C

    $2,949.47
    S pump close coupled to a TEFC 115 / 230 /1 phase electric motor. Self priming FRP plastic resists abrasive particles, good for most water transfer applications.
  6. Pacer Pumps

    Trash Pump Elect 5 HP

    58-72K8 P 58-0116

    $2,266.65
    TRASH PUMP. Self-priming, light weight Trash pump, long coupled motor driven. Industrial Open Drip Proof motor driven. Pump casing is made or rugged glass reinforced polyester, SS fasteners, urethane coated metal impeller and volute resist wear. ...
  7. Koshin Pumps

    High Pressure water Fire Pump 2 inch

    SERH-50V

    $1,819.00

    High Pressure water Fire Pump. 2"

    OBSolete, see newer model to right.

    Koshin Pump with Honda engine Water Pressure Pump 2 inch. All aluminum die cast pump housing, with CI impeller and volute for lightweight and portability. Metal Carry roll cag...

    Multi-Port Fire / Irrigation / Wash down 5HP 8000GPH Learn More
  8. Myers Pumps

    Frame Mtd. 2 Stage w/ motor

    I2CB-5M-1

    $9,320.00

    Myers I2C, I2CI and I2CS Two-Stage Centrifugal pumps are designed and built for rugged continuous duty service. These high head (to 400 feet) medium capacity (to 140 GPM) are available in standard fitted (I2C), iron & bronze fitted (I2CI) epoxy...

    230v-1ph Learn More
  9. Myers Pumps

    Frame Mtd. 2 Stage w/ motor

    I2CIB-5M-1

    $9,320.00

    Myers I2C, I2CI and I2CS Two-Stage Centrifugal pumps are designed and built for rugged continuous duty service. These high head (to 400 feet) medium capacity (to 140 GPM) are available in standard fitted (I2C), iron & bronze fitted (I2CI) epoxy c...

  10. Pacer Pumps

    SE2FB C5.0C Plastic Self priming pump

    58-12F2-C5.0C

    $1,899.80
    S pump close coupled to a TEFC electric motor. Self priming FRP plastic resists abrasive particles, good for most water, brackish and mild chemical transfer applications. Widely used to transfer and spray de-icing / anti-icing solutions, such a...
    5HP 230v/1 Learn More
View as List Grid

Items 81-90 of 203

Set Descending Direction
per page