My Cart

Horizontal Pumps

Designed and meant to be used as a horizontally mounted assembly. This includes feet on the pump, motor or both for securing the pump and motor to its floor or structure. The most common type of Horizontal pump is the End Suction, where the fluid enters the front end of the casing and exits perpendicularly. The source of liquid is either above the pump, in which case it is a positive head and no special priming is needed. If the liquid source is below the pump then either a priming chamber is needed or use of some sort of suction side valve, i.e. foot valve, to maintain prime in an open pumping system. If the inlet and outlet go into the same tank, i.e. re-circulating or filtering, and the lines are kept below the surface level, then after initial priming the system will maintain its prime.The two big considerations that must be given to horizontal pumps is priming method and NPSHa.Typical Centrifugal Horizontal pumps include mechanically sealed, magnetic coupled seal-less, self-priming, multistage, jet, back pullout, portable, API and ANSI to name a few.
View as List Grid

Items 61-70 of 203

Set Descending Direction
per page
  1. MP Pumps

    FM 10 w/ 5HP Motor

    24389

    $4,685.00

    Flomax® 10 are self-priming pumps, pipe size 2" NPT. Electric Motor Driven Pump using TEFC Electric Motor 5 HP.  Includes base plate.

    FLOMAX® 10 self-priming centrifugal pumps are capable of creating vacuum sufficient to lift liquids from heights...

    Cast Iron 5HP 230/3phase 2" Learn More
  2. MP Pumps

    FM 10 w/ 5HP Motor

    28604

    $6,012.50

    Flomax® 10 are self-priming pumps, pipe size 2" NPT. Electric Motor Driven Pump using TEFC Electric Motor 5 HP.  Includes base plate.

    FLOMAX® 10 self-priming centrifugal pumps are capable of creating vacuum sufficient to lift liquids from height...

    Cast Iron FM10 5HP 230/1phase 2" Learn More
  3. AMT Pumps

    Diesel Engine Dredge Pump

    316F-Z5

    $8,662.56

    Diesel Dredge Pump with Hatz 1B20 diesel engine. Replaces 316F-D5

    AMT Engine Driven Dredging Pump is designed for pumping sea water and fresh water containing up to 25% sand, debris and other abrasive particles. This unit can be used for other ma...

    Diesel Learn More
  4. Pacer Pumps

    SE3LB D5.0C

    58-13L2-D5.0C

    $1,830.80

    3" S pump close coupled to a TEFC 3P electric motor. Self priming FRP polyester plastic resists abrasive particles, good for most water, salt water, waste water, mild acids and bases transfer applications. Widely used to transfer and spray de-icin...

    3" 5HP/3ph Learn More
  5. AMT Pumps

    Electric Trash pump 5HP

    393A-95

    $2,606.31

    5HP Electric trash pump. AMT Cast Iron Trash pumps are designed for a trouble free and economical handling of solid-laden liquids and slurries. Pumps are available in three NPT port sizes; 2", 3" and 4". Cast iron construction with 2 vane Stainles...

    230/460v 3P 2" Learn More
  6. AMT Pumps

    Sprinkler Booster pump

    3655-95

    $2,157.94

    Sprinkler pump 5HP Booster pumps feature Investment Cast 316 SS closed impellers for high efficiency and resistance against erosion caused by abrasive particles. Sprinkler pumps self-prime to 20 feet. Single stage feature a built-in check valve to...

    5HP 230/460v ODP Learn More
  7. Gorman-Rupp Pumps

    2" Honda Powered Trash Pump

    2S5XHR

    $1,876.38

    Honda 2" Engine Powered Trash pump is designed for applications which require high flow efficiency and solid handling capability. Honda engine trash pumps are constructed of heavy duty sand cast aluminum components featuring replaceable ductile ir...

    Honda Water Trash pump Learn More
  8. Sta-Rite

    5HP Irrigation Pump High Head

    DHJ-170

    $5,449.00

    5hp Irrigation Pump

    Irrigation Pump, High Head Self-priming centrifugal pump for irrigation, fire protection, marine and liquid transfer. Cast iron construction with Bronze enclosed impeller. Includes drain port.

    This irrigation pump can also be...

    5HP 230v/1 Learn More
  9. AMT Pumps

    2" Engine Trash Pump

    3932-95

    $1,998.56

    AMT line of Engine Driven Trash pumps is designed for applications which require high flow efficiency and solids handling capability. Pumps are constructed of heavy duty sand cast components featuring removable/replaceable Cast Iron volutes, impel...

    Honda GX160 Engine Learn More
  10. Berkeley Pumps

    B3ZPMS Centrifugal Water Pump

    B54600

    $8,422.00

    B54600 Berkeley B3ZPMS water pump

    Centrifugal water pump, close coupled with mechanical seal. Used for irrigation, fountains and other water transfer applications.

    BERKELEY 5hp Close-Coupled End-Suction Pumps are ideal for most applications requ...

    230v/1 5HP Learn More
View as List Grid

Items 61-70 of 203

Set Descending Direction
per page