Horizontal Pumps
Designed and meant to be used as a horizontally mounted assembly.
This includes feet on the pump, motor or both for securing the pump
and motor to its floor or structure. The most common type of
Horizontal pump is the End Suction, where the fluid enters the
front end of the casing and exits perpendicularly. The source of
liquid is either above the pump, in which case it is a positive
head and no special priming is needed. If the liquid source is
below the pump then either a priming chamber is needed or use of
some sort of suction side valve, i.e. foot valve, to maintain prime
in an open pumping system. If the inlet and outlet go into the same
tank, i.e. re-circulating or filtering, and the lines are kept
below the surface level, then after initial priming the system will
maintain its prime.The two big considerations that must be given to
horizontal pumps is priming method and NPSHa.Typical Centrifugal
Horizontal pumps include mechanically sealed, magnetic coupled
seal-less, self-priming, multistage, jet, back pullout, portable,
API and ANSI to name a few.
-
MP Pumps
HTO 120 Pump END ONLY
29809
$3,228.75Centrifugal Hot Oil Pump END ONLY:
- Applications: Hot Oil, Heat Transfer Fluid, Asphalt plants, Plastics, Chemical, Food, and Processing Industries which require pumping of high temperature fluids. The HTO is used to move a heat transfer fluid o...
5.96" imp. Learn More -
MP Pumps
316SS Self Priming Pump Honda
38577
$6,112.50316SS self priming pump powered by Honda gas engine.
Stainless Steel Flomax 8 pump with Honda engine are self-priming pumps, pipe size 2" NPT. Gas Engine Driven w/ 5 HP Honda, recoil start. 316SS gas semi-trash pumps.
Standard features include ...
5HP Honda Stainless Learn More -
MP Pumps
HTO 120 Pump Tempuflo
30884
$6,147.50Centrifugal Hot Oil Pump up to 650F
with Vertical discharge Features:
- Utilizes an isolated seal chamber, effectively cooled by a fan clamp, which couples the unit to the shaft of a c-frame motor
- Standard carbon/ceramic mechanical seal with FK...
5.96" imp. 5HP 230/460v Learn More -
MP Pumps
High Head Bronze pump & motor
36086
$11,000.21High Head Pedestal Bronze pump.Self priming high pressure centrifugal pump, motor drive on ship or boat.
- 2 x 2" HIGH HEAD
- ABS type approved for many shipboard services
- FLOWS - TO 160 GPM
- PRESSURES - TO 190 TDH
- Bronze CONSTRUCTION
- DRIV...
5HP 230/460v Learn More -
MP Pumps
FM 8 w/ Motor
22849
$4,625.00Flomax 8 are self-priming Cast Iron pumps, pipe size 2" NPT. Electric Motor Driven Pump using a Coupled Electric Motor-5 HP5HP 230/460v Cast Iron Learn More -
MP Pumps
HTO 120 Pump
29892
$6,400.00Centrifugal Hot Oil Pump HTO120
Features:
- Applications: Asphalt plants, Plastics, Chemical, Food, and Processing Industries which require pumping of high temperature fluids. The HTO is used to move a heat transfer fluid on a double walled pipi...
5.5" Impeller 5HP 3-Phase Learn More -
MP Pumps
FM 8 w/ Engine
29635
$2,512.50Flomax 8 are self-priming pumps, pipe size 2" NPT. Gas Engine Driven w/ 5 HP Honda5HP Honda Learn More -
MP Pumps
High Head Pump & Motor HHLF
36438
$5,675.00High head self priming centrifugal pump, close coupled to an electric motor.
- 1 1/2 x 1 1/2" HIGH HEAD
- FLOWS - TO 140 GPM
- PRESSURES - TO 190 TDH
- CAST IRON CONSTRUCTION
- DRIVE SLEEVE - 304 STAINLESS STEEL
- Close Coupled Motor
- SEALS - STANDARD...
5HP 230v/1ph Learn More -
MP Pumps
Honda Stainless Self Priming Flomax 8
36764
$6,077.50Honda Electric Start w/ Stainless Steel self priming pump.Stainless Steel Flomax 8 pump with Honda engine are self-priming pumps, pipe size 2" NPT. Gas Engine Driven w/ 5 HP Honda. 316SS gas semi-trash pumps.
Standard features include a 2″ NPT ...
5HP ES Honda Stainless Learn More -
MP Pumps
Series 200 pump
22737
$3,712.50Centrifugal pump, motor driven centrifugal pump. End suction centrifugal pump made from rugged cast iron with a cast impeller. Impellers are dynamically balanced to improve efficiency and bearing life.Discharge can be vertical or horizontal. ...5HP 230/460v Learn More
