My Cart

Horizontal Pumps

Designed and meant to be used as a horizontally mounted assembly. This includes feet on the pump, motor or both for securing the pump and motor to its floor or structure. The most common type of Horizontal pump is the End Suction, where the fluid enters the front end of the casing and exits perpendicularly. The source of liquid is either above the pump, in which case it is a positive head and no special priming is needed. If the liquid source is below the pump then either a priming chamber is needed or use of some sort of suction side valve, i.e. foot valve, to maintain prime in an open pumping system. If the inlet and outlet go into the same tank, i.e. re-circulating or filtering, and the lines are kept below the surface level, then after initial priming the system will maintain its prime.The two big considerations that must be given to horizontal pumps is priming method and NPSHa.Typical Centrifugal Horizontal pumps include mechanically sealed, magnetic coupled seal-less, self-priming, multistage, jet, back pullout, portable, API and ANSI to name a few.
View as List Grid

Items 1-10 of 37

Set Descending Direction
per page
Page
  1. aMT - 370F-97: Bronze Centrifugal Pump

    AMT Pumps

    Bronze Centrifugal Pump

    370F-97
    25% Off Special Price $711.00 Regular Price $948.00
    Cast Bronze with SS impeller. Designed for continuous-duty low pressure OEM, Industrial/Commercial and General Service applications including circulation, chemical processing, liquid transfer and cooling. three phase TEFC motor. Casing can be r...
    230/460v 1/2HP TEFC Learn More
    Add to Wish List Add to Compare
  2. Cast Iron Centrifugal Pump

    AMT Pumps

    Cast Iron Centrifugal Pump

    368C-95
    25% Off Special Price $466.50 Regular Price $622.00

    Centrifugal pump Designed for continuous-duty low pressure OEM, Industrial Commercial and General Service applications including circulation, chemical processing, liquid transfer and cooling.

    For this Centrifugal pump see curve C

    8249K211

     
    230/460v/3phase 1/2HP TEFC Learn More
    Add to Wish List Add to Compare
  3. fti_db7.jpg

    Finish Thompson Pumps (FTI)

    FTI DB6 pump

    DB6HP-M227
    $1,325.00

    Introducing the DB Series magnetic drive pump—the new standard for high hydraulic efficiency and corrosive fluid handling. With design-aided magnetic flux and computational fluid dynamics technology, the DB Series packs all the high-pressure, fl...

    1/2HP 230/460v PolyPro Learn More
    Add to Wish List Add to Compare
  4. American Stainless C14311BBT3 SS pump motor

    American Stainless

    SS pump & motor

    C14311BBT3
    $687.01
    asp american stainless electric pump 304ss. Models SSP & SSPC pumps have a one-piece shell, capable of supporting the pump and motor weight in a vertically mounted position. The internal design also prevents any air from being trapped in the pu...
    1/2HP 230/460V TEFC Learn More
    Add to Wish List Add to Compare
  5. Webtrol PC33R-T Corrosion Resistant Pumps

    Webtrol

    Corrosion Resistant Pumps

    PC33R-T
    $2,373.35
    • Glass Reinforced Noryl
    • Ability to rotate the discharge in 90 degree increments.
    • 316SS wear ring and impeller hub
    • Close coupled
    1/2HP 115/230V TEFC Learn More
    Add to Wish List Add to Compare
  6. Webtrol PC50R-3PH-T Corrosion Resistant Pump

    Webtrol

    Corrosion Resistant Pump

    PC50R-3PH-T
    $2,349.74
    Corrosion resistant Centrifugal Pump.
    • Glass Reinforced Noryl
    • Close coupled
    • Ability to rotate the discharge in 90 degree increments.
    • 316 stainless steel
    1/2HP 208-230/460V TEFC Learn More
    Add to Wish List Add to Compare
  7. MP 22741 Series 30 w/ motor

    MP Pumps

    Series 30 w/ motor

    22741
    $1,390.00
    Series 30 End Suction Centrifugal Pump uses a close-coupled Cast Iron Electric Motor-0.5 HP, 3-phase, 230/460 V. The pump has 1" NPT suction and 0.75" NPT horizontal or vertical discharge.
    Learn More
    Add to Wish List Add to Compare
  8. MP 24481 Series 30 w/ motor

    MP Pumps

    Series 30 w/ motor

    24481
    $1,160.00
    Series 30 End Suction Centrifugal Pump uses a close-coupled Cast Iron Electric Motor-0.5 HP, 3-phase, 230/460 V. The pump has 1" NPT suction and 0.75" NPT horizontal or vertical discharge.
    Learn More
    Add to Wish List Add to Compare
  9. Pedrollo T65 05H36S Regenerative Turbine pump CI

    Pedrollo Pumps

    Regenerative Turbine pump CI

    T65 05H36S
    20% Off Special Price $309.82 Regular Price $387.28
    Turbine Pump, Peripheral pump, clear water pump.

    They are recommended for pumping clean water without abrasive particles and liquids that are chemically non aggressive to the materialsfrom which the pump is made. For their reliability, simplic...

    3-Phase Industrial 1/2HP Learn More
    Add to Wish List Add to Compare
  10. Pedrollo PQ05H36S Liquid Turbine pump

    Pedrollo Pumps

    Liquid Turbine pump

    PQ05H36S
    $416.12
    Liquid Turbine pump. Peripheral pump with cast iron body.

    They are recommended for pumping clean water without abrasive particles and liquids that are chemically non aggressive to the materials from which the pump is made. FOR THEIR RELIABILITY...

    1/2HP 230v/460 Learn More
    Add to Wish List Add to Compare
View as List Grid

Items 1-10 of 37

Set Descending Direction
per page
Page
Compare Products
  1. Remove This Item
Compare
Clear All
Shop By
Now Shopping by
  1. Phase (Ø) Three (3) Remove This Item
  2. Horse Power (HP) 1/2 Remove This Item
  3. Motor TEFC Remove This Item
Clear All
Shopping Options
Category
  1. Mechanical Sealed Pump 33 items
  2. Magnetic Coupled (Seal-less) Pumps 4 items
Voltage (Range)
  1. 208-230/460//190-220/380-415 1 item
  2. 220-240/460-480 21 items
  3. 110-120/220-240 1 item
  4. 220-240 1 item
  5. 208-240/460 12 items
inlet size
  1. Less than 1" 6 items
  2. 1" 11 items
  3. 1 ¼" 9 items
  4. 1 ½" 5 items
  5. 2" 2 items
PRICE $
$  -  $