Horizontal Pumps
Designed and meant to be used as a horizontally mounted assembly.
This includes feet on the pump, motor or both for securing the pump
and motor to its floor or structure. The most common type of
Horizontal pump is the End Suction, where the fluid enters the
front end of the casing and exits perpendicularly. The source of
liquid is either above the pump, in which case it is a positive
head and no special priming is needed. If the liquid source is
below the pump then either a priming chamber is needed or use of
some sort of suction side valve, i.e. foot valve, to maintain prime
in an open pumping system. If the inlet and outlet go into the same
tank, i.e. re-circulating or filtering, and the lines are kept
below the surface level, then after initial priming the system will
maintain its prime.The two big considerations that must be given to
horizontal pumps is priming method and NPSHa.Typical Centrifugal
Horizontal pumps include mechanically sealed, magnetic coupled
seal-less, self-priming, multistage, jet, back pullout, portable,
API and ANSI to name a few.
-
Finish Thompson Pumps (FTI)
FTI Magnetic coupled pump
DB11P-M215
$2,520.95FTI Magnetic coupled pump DB11 close coupled to a 2HP TEFC motor.- Five-year warranty
- Extended run dry ability (with carbon bushing)
- High operating efficiency —Up to 70%
- Polypropylene construction
- Powerful neodymium magnets
- Close-coupled de...
2HP 230/460v Polypro Learn More -
Finish Thompson Pumps (FTI)
Magnetic coupled pump
DB11P-M207
$2,504.25Magnetic coupled pump.- Five-year warranty
- Extended run dry ability (with carbon bushing)
- High operating efficiency —Up to 70%
- Polypropylene construction
- Powerful neodymium magnets
- Close-coupled design
- Horizontal or vertical installation w...
1-1/2HP 230/460v Learn More -
Finish Thompson Pumps (FTI)
FTI DB11 Magnetic coupled pump
DB11P-M216
$2,520.95Magnetic coupled pump.
- Five-year warranty
- Extended run dry ability (with carbon bushing)
- High operating efficiency —Up to 70%
- Polypropylene construction
- Powerful neodymium magnets
- Close-coupled design
- Horizontal or vertical installation...
2HP 115/230v PolyPro Learn More -
Finish Thompson Pumps (FTI)
Magnetic centrifugal pump PEO
DB11P
$1,997.04Magnetic centrifugal pump.- Five-year warranty
- Extended run dry ability (with carbon bushing)
- High operating efficiency —Up to 70%
- Polypropylene construction
- Powerful neodymium magnets
- Close-coupled design
- Horizontal or vertical installati...
PEO PolyPro 56C Learn More -
Finish Thompson Pumps (FTI)
FTI DB11 pump PEO
DB11V
$2,554.60Magnetic centrifugal pump.- Five-year warranty
- Extended run dry ability (with carbon bushing)
- High operating efficiency —Up to 70%
- Polypropylene or PVDF construction
- Powerful neodymium magnets
- Close-coupled design
- Horizontal or vertical in...
Pump End Only Kynar Learn More -
Finish Thompson Pumps (FTI)
Magnetic centrifugal pump PEO
DB22P
$4,392.64Born from a painstaking, extensive effort, the efficiency of the db series lowers energy consumption and operating costs over the long life cycle of the pump. Constructed from Polypropylene or PVDF, the DB series operates durably in the most...Pump End Only no motor Learn More -
Finish Thompson Pumps (FTI)
FTI Magnetic pump PEO
DB15V
$3,428.04FTI Finish Thompson - DB15V: Magnetic coupled pump. Kynar chemical process pump. Superior PVDF design in a sealless magdrive pump. Pump End Only- Five-year warranty
- Extended run dry ability (with carbon bushing)
- High operating efficiency —Up t...
Pump Only Kynar Learn More -
Finish Thompson Pumps (FTI)
Magnetic coupled pump PEO
DB15P
$2,166.64Magnetic coupled pump PEO Pump End Only, no motor. FTI award winning chemical sealless pumps are used throughout in the process industries. American made quality and superior design features.- Five-year warranty
- Extended run dry ability (with c...
No motor Learn More
