My Cart

Horizontal Pumps

Designed and meant to be used as a horizontally mounted assembly. This includes feet on the pump, motor or both for securing the pump and motor to its floor or structure. The most common type of Horizontal pump is the End Suction, where the fluid enters the front end of the casing and exits perpendicularly. The source of liquid is either above the pump, in which case it is a positive head and no special priming is needed. If the liquid source is below the pump then either a priming chamber is needed or use of some sort of suction side valve, i.e. foot valve, to maintain prime in an open pumping system. If the inlet and outlet go into the same tank, i.e. re-circulating or filtering, and the lines are kept below the surface level, then after initial priming the system will maintain its prime.The two big considerations that must be given to horizontal pumps is priming method and NPSHa.Typical Centrifugal Horizontal pumps include mechanically sealed, magnetic coupled seal-less, self-priming, multistage, jet, back pullout, portable, API and ANSI to name a few.
View as List Grid

Items 11-20 of 265

Set Descending Direction
per page
Page
  1. Finish Thompson - DB6V-M530: FTI DB6 Explosion Proof pump

    Finish Thompson Pumps (FTI)

    FTI DB6 Explosion Proof pump

    DB6V-M530
    $2,795.86

    FTI DB6 Explosion Proof pump, PVDF (Kynar) for chemicals / solvents

    DB Series hazardous duty magnetic drive pump—the new standard for high hydraulic efficiency and corrosive fluid handling. With design-aided magnetic flux and computational fluid ...

    1/3hp Explosion proof 115/230v PVDF Learn More
    Add to Wish List Add to Compare
  2. 316SS March 7 Pump Air motor

    March Pumps

    316SS March 7 Pump Air Moror

    TE-7S-MD-Air
    15% Off Special Price $2,827.10 Regular Price $3,326.00
    316SS March Series 7 magdrive pump with AIR motor / pneumatic totally enclosed pumps are the "workhorses" or the March product line. Ceramic spindle is standard. Contact us for additional materials, port sizes, or motors for EXPlosion proof req...
    Air motor Learn More
    Add to Wish List Add to Compare
  3. Finish Thompson - DB6V-M538: FTI DB6 Explosion Proof pump

    Finish Thompson Pumps (FTI)

    FTI DB6 Explosion Proof pump

    DB6V-M538
    $2,795.86

    FTI DB6 Explosion Proof pump, PVDF (Kynar) for chemicals / solvents

    DB Series hazardous duty magnetic drive pump—the new standard for high hydraulic efficiency and corrosive fluid handling. With design-aided magnetic flux and computational fluid ...

    1/3hp Explosion proof 230/460v PVDF Learn More
    Add to Wish List Add to Compare
  4. March te-7r 3/4hp pump

    March Pumps

    March Magdrive Pump Ryton

    TE-7R-MD 1PH 3/4HP
    $1,145.00

    March Ryton Series 7 magnetic Pump.

    Magdrive / sealless pumps are the "workhorses" or the March product line. Ceramic spindle is standard. Drive magnet is separated from impeller magnet, preventing fluids from contacting the motor drive shaft, an...

    #7 Pump 115/230v 3/4HP Learn More
    Add to Wish List Add to Compare
  5. March 0155-0165-0100 TE-7R-MD Wet End Kit Parts

    March Pumps

    TE-7R-MD Wet End Kit Parts

    0155-0165-0100
    $408.00
    March 7R pump parts, repair kit, Wet End. Parts can be bought individually or in complete Wet End Kits. Ryton wet end kit. Magdrive totally enclosed pumps are the "workhorses" or the March product line. Ceramic spindle is standard. Drive magnet...
    March 7R Pump repair kit parts Learn More
    Add to Wish List Add to Compare
  6. march pump 316SS Magdrive Pump te-7s-md

    March Pumps

    316SS March 7 Magdrive Pump

    TE-7S-MD 1PH 1HP
    15% Off Special Price $2,439.50 Regular Price $2,870.00

    316SS March Series 7 magdrive pump.

    Magnetic totally enclosed pumps are the "workhorses" or the March product line. Ceramic spindle is standard. Contact us for additional materials, port sizes, or motors for EXP requirements.

    • Applications:
        ...
    115/230v TEFC Learn More
    Add to Wish List Add to Compare
  7. March te-7r pump magnetic drive

    March Pumps

    March Ryton Magdrive Pump

    TE-7R-MD 3PH 3/4HP
    10% Off Special Price $1,028.70 Regular Price $1,143.00

    March Series 7 magdrive totally enclosed pumps are the "workhorses" or the March product line. Ceramic spindle is standard. Drive magnet is separated from impeller magnet, preventing fluids from contacting the motor drive shaft, and allowing the m...

    3/4HP 230/460v Learn More
    Add to Wish List Add to Compare
  8. March TE-7K-MD-3P-1hp Kynar Magdrive Pump

    March Pumps

    Kynar Magdrive Pump

    TE-7K-MD 3PH 1HP
    15% Off Special Price $1,311.55 Regular Price $1,543.00

    March Series 7 magdrive PVDF Kynar pumps are the "workhorses" or the March product line. Ceramic spindle is standard. Drive magnet is separated from impeller magnet, preventing fluids from contacting the motor drive shaft, and allowing the motor t...

    230/460v 1HP Kynar Learn More
    Add to Wish List Add to Compare
  9. March TE-7K-MD March Pump

    March Pumps

    Chemical March Pump

    TE-7K-MD 3PH 3/4HP
    15% Off Special Price $1,216.35 Regular Price $1,431.00

    Chemical Kynar Pump. March Series 7 magdrive totally enclosed pumps are the "workhorses" or the March product line. Kynar PVDF molded parts. Ceramic spindle is standard. Drive magnet is separated from impeller magnet, preventing fluids from contac...

    230/460v 3/4HP Kynar Learn More
    Add to Wish List Add to Compare
  10. March TE-5.5S-MD-1Xp Magnetic pump electric Explosion Proof

    March Pumps

    Magnetic pump electric Explosion Proof

    TE-5.5C-MD XP 1PH 1/3HP
    $1,883.00

    Stainless Steel magnetic pump and electric Explosion proof motor. OBSOLETE see 0151-0113-0100. Chemical pumps for industrial process, photo, solvents, and other clear liquid applications. Max. flow 30GPM. Head 41 ft. Temps. to 250F. 3.187 impeller...

    115/230v OBS Learn More
    Add to Wish List Add to Compare
View as List Grid

Items 11-20 of 265

Set Descending Direction
per page
Page
Compare Products
  1. Remove This Item
Compare
Clear All
Shop By
Now Shopping by
  1. Category Chemical Processing Pumps Remove This Item
Clear All
Shopping Options
Phase (Ø)
  1. Single (1) 119 items
  2. Three (3) 101 items
Voltage (Range)
  1. 110-120 51 items
  2. 208-230/460//190-220/380-415 9 items
  3. 220-240/460-480 78 items
  4. 110-120/220-240 64 items
  5. 220-240 16 items
  6. 208-240/460 12 items
  7. 460-480 6 items
  8. 12/24/36 VDC 2 items
Horse Power (HP)
  1. 1/4 3 items
  2. 1/3 17 items
  3. 1/2 20 items
  4. 2/3 1 item
  5. 3/4 21 items
  6. 1 20 items
  7. 1 1/2 5 items
  8. 2 9 items
  9. 3 19 items
  10. 5 20 items
  11. 7 1/2 20 items
  12. 10 6 items
inlet size
  1. Less than 1" 52 items
  2. 1" 68 items
  3. 1 ½" 35 items
  4. 2" 60 items
  5. 3" 5 items
PRICE $
$  -  $
Motor
  1. Air-Pneumatic 10 items
  2. ChemDuty 14 items
  3. EXP (C 1, Gp C/D & C11, Gp F/G) 36 items
  4. EXP (C 1, Gp C/D) 8 items
  5. Hermetically Sealed 10 items
  6. ODP 16 items
  7. Open 28 items
  8. TEFC 125 items