Horizontal Pumps
Designed and meant to be used as a horizontally mounted assembly.
This includes feet on the pump, motor or both for securing the pump
and motor to its floor or structure. The most common type of
Horizontal pump is the End Suction, where the fluid enters the
front end of the casing and exits perpendicularly. The source of
liquid is either above the pump, in which case it is a positive
head and no special priming is needed. If the liquid source is
below the pump then either a priming chamber is needed or use of
some sort of suction side valve, i.e. foot valve, to maintain prime
in an open pumping system. If the inlet and outlet go into the same
tank, i.e. re-circulating or filtering, and the lines are kept
below the surface level, then after initial priming the system will
maintain its prime.The two big considerations that must be given to
horizontal pumps is priming method and NPSHa.Typical Centrifugal
Horizontal pumps include mechanically sealed, magnetic coupled
seal-less, self-priming, multistage, jet, back pullout, portable,
API and ANSI to name a few.
-
Finish Thompson Pumps (FTI)
FTI DB6 pump
DB6HP-M227
$1,325.00Introducing the DB Series magnetic drive pump—the new standard for high hydraulic efficiency and corrosive fluid handling. With design-aided magnetic flux and computational fluid dynamics technology, the DB Series packs all the high-pressure, fl...
1/2HP 230/460v PolyPro Learn More -
Finish Thompson Pumps (FTI)
Magnetic coupled pump
DB10P-M207
$1,421.30Magnetic coupled pump.- Five-year warranty
- Extended run dry ability (with carbon bushing)
- High operating efficiency —Up to 70%
- Polypropylene construction
- Powerful neodymium magnets
- Close-coupled design
- Horizontal or vertical installation w...
1.5HP 230/460v Learn More -
Finish Thompson Pumps (FTI)
ULTRAchem ANSI DIM. Mag Drive pump w/ 3hp motor
UC1516AECCSVF4121409
$8,100.00Tefzel lined ANSI / ANSI B73.1 Casing dimensional Magnetic coupled process pump. Sealless. Powerful neodymium magnets, no seals to replace. The modified concentric volute equalizes pressure across the entire flow range allowing minimal hydrauli... -
Finish Thompson Pumps (FTI)
ULTRAchem ANSI DIM. Mag Drive pump w/ 7.5hp motor
UC326AECSSVF4622131
$10,026.00Tefzel lined ANSI / ANSI B73.1 Casing dimensional Magnetic coupled process pump. Sealless. Powerful neodymium magnets, no seals to replace. The modified concentric volute equalizes pressure across the entire flow range allowing minimal hydrauli...7.5HP/3ph Learn More -
Finish Thompson Pumps (FTI)
Magnetic Acid pump
DB22P4-M237
$5,463.72Magnetic Acid pump chemical Duty, close coupled to a TEFC motor. Born from a painstaking, extensive effort, the efficiency of the db series lowers energy consumption and operating costs over the long life cycle of the pump. Constructed from Pol...Polypro 7.5HP 230/460v Learn More -
Finish Thompson Pumps (FTI)
Magnetic Chemical pump
DB22P3-21-M239
$5,691.88Magnetic chemical pump industrial Duty, close coupled to a TEFC motor. Born from a painstaking, extensive effort, the efficiency of the db series lowers energy consumption and operating costs over the long life cycle of the pump. Constructed fr...Polypro 10HP 230/460v Learn More -
Finish Thompson Pumps (FTI)
FTI Magnetic pump Kynar
DB15V-4-M208
$4,410.82DB15V-4-M208: FTI Magnetic coupled pump. Finish Thompson line of chemical handling pumps featuring their state of the art sealless design- Five-year warranty
- Extended run dry ability (with carbon bushing)
- High operating efficiency —Up to 70%...
3HP, 1phase Learn More -
Finish Thompson Pumps (FTI)
Magnetic coupled pump Polypro
DB15P-2-M209
$2,919.40FTI DB15P-2-M209 Magnetic coupled pump. Finish Thompson chemical pump with superior sealless design.- Five-year warranty
- Extended run dry ability (with carbon bushing)
- High operating efficiency —Up to 70%
- Polypropylene construction
- Powerful ...
3HP 230/460v 56C Learn More -
March Pumps
Magnetic Sealless pump EXP
TE-5.5S-MD XP 1PH 1/3HP
$3,988.00Explosion Proof magnetic sealless pump. Stainless
design w / closed impeller magnet assembly. OBSOLETE see 1HP version 0151-0114-0100. Chemical pumps for hazardous industrial process, photo, solvents, alcohol, mineral spirits, ethanol and other c...
-
March Pumps
March Pump 1/15HP
AC-3CP-MD 115V
15% Off Special Price $290.70 Regular Price $342.00March Pump 230v, Simple, versatile and reliable, March Series 3 pumps feature an "orbital" magnetic drive and leak-proof design. They are rated up to 10GPM (33LPM) flow and for heads up to 20.5 ft (4.5m) (39 ft. [13m] when driven by an air motor)....
115v Learn More
