My Cart

Horizontal Pumps

Designed and meant to be used as a horizontally mounted assembly. This includes feet on the pump, motor or both for securing the pump and motor to its floor or structure. The most common type of Horizontal pump is the End Suction, where the fluid enters the front end of the casing and exits perpendicularly. The source of liquid is either above the pump, in which case it is a positive head and no special priming is needed. If the liquid source is below the pump then either a priming chamber is needed or use of some sort of suction side valve, i.e. foot valve, to maintain prime in an open pumping system. If the inlet and outlet go into the same tank, i.e. re-circulating or filtering, and the lines are kept below the surface level, then after initial priming the system will maintain its prime.The two big considerations that must be given to horizontal pumps is priming method and NPSHa.Typical Centrifugal Horizontal pumps include mechanically sealed, magnetic coupled seal-less, self-priming, multistage, jet, back pullout, portable, API and ANSI to name a few.
View as List Grid

Items 31-40 of 309

Set Descending Direction
per page
Page
  1. fti_db7.jpg

    Finish Thompson Pumps (FTI)

    FTI DB6 pump

    DB6HP-M227
    $1,325.00

    Introducing the DB Series magnetic drive pump—the new standard for high hydraulic efficiency and corrosive fluid handling. With design-aided magnetic flux and computational fluid dynamics technology, the DB Series packs all the high-pressure, fl...

    1/2HP 230/460v PolyPro Learn More
    Add to Wish List Add to Compare
  2. Finish Thompson DB10P-M207 Magnetic coupled pump

    Finish Thompson Pumps (FTI)

    Magnetic coupled pump

    DB10P-M207
    $1,421.30
    Magnetic coupled pump.
    • Five-year warranty
    • Extended run dry ability (with carbon bushing)
    • High operating efficiency —Up to 70%
    • Polypropylene construction
    • Powerful neodymium magnets
    • Close-coupled design
    • Horizontal or vertical installation w...
    1.5HP 230/460v Learn More
    Add to Wish List Add to Compare
  3. Finish Thompson UC1516AECCSVF4121409 ULTRAchem ANSI DIM. Mag Drive pump w/ 3hp motor

    Finish Thompson Pumps (FTI)

    ULTRAchem ANSI DIM. Mag Drive pump w/ 3hp motor

    UC1516AECCSVF4121409
    $8,100.00
    Tefzel lined ANSI / ANSI B73.1 Casing dimensional Magnetic coupled process pump. Sealless. Powerful neodymium magnets, no seals to replace. The modified concentric volute equalizes pressure across the entire flow range allowing minimal hydrauli...
    Learn More
    Add to Wish List Add to Compare
  4. Finish Thompson UC326AECSSVF4622131 ULTRAchem ANSI DIM. Mag Drive pump w/ 7.5hp motor

    Finish Thompson Pumps (FTI)

    ULTRAchem ANSI DIM. Mag Drive pump w/ 7.5hp motor

    UC326AECSSVF4622131
    $10,026.00
    Tefzel lined ANSI / ANSI B73.1 Casing dimensional Magnetic coupled process pump. Sealless. Powerful neodymium magnets, no seals to replace. The modified concentric volute equalizes pressure across the entire flow range allowing minimal hydrauli...
    7.5HP/3ph Learn More
    Add to Wish List Add to Compare
  5. March LC-3CP-MD MAG Pump 1/20HP

    March Pumps

    MAG Pump 1/20HP

    LC-3CP-MD 115V
    15% Off Special Price $392.70 Regular Price $462.00

    March magnetic pump, submersible or open air. March Seawater Circulation Pumps

    Simple, versatile and reliable, March Series 3 pumps feature an "orbital" magnetic drive and leak-proof design. They are rated up to 10GPM (33LPM) flow and for heads u...

    submersible or open air 115v Learn More
    Add to Wish List Add to Compare
  6. MARCH_SERIES 5.5 kynar pump

    March Pumps

    Kynar PVDF PUMP 5.5

    TE-5.5K-MD 1PH 1/3HP
    15% Off Special Price $935.00 Regular Price $1,100.00

    Kynar March Pump. Involute design w/closed PVDF impeller magnet assembly. Max. flow 30GPM. Head 41 ft. Temps. to 190F. 2.937 impeller. This pump has Kynar plastic construction & can handle strong halogen solutions & certain chronic or sulfuric aci...

    115/230v TEFC PP Learn More
    Add to Wish List Add to Compare
  7. March Pump TE-5C-md ryton PumpBiz

    March Pumps

    Sealless pump Ryton

    TE-5C-MD RYTON 1P
    $916.49

    Sealless pump Ryton. All Ryton PPS magnetic coupled pump. Ryton is a engineering thermoplastic and is good for many chemicals, solvents, alcohol and hot liquids. Motor is TEFC 115/230 single phase. March pumps are used in industry, sanitizing with...

    Ryton Pump 115/230V TEFC Learn More
    Add to Wish List Add to Compare
  8. March 0150-0147-0100 March magnetic PEO- PP 1080GPH

    March Pumps

    March magnetic Wet End kit

    0150-0147-0200
    $127.00

    March AC-5C wet end repair kit. Seawater Circulation Pump END ONLY. Polypro magnetic coupled pump.

    Connections are hose barb. 0150-0026-0100. Often used on Kodak plate processor polychrome 80N, marine AC cooling units, boat AC units like Marine A...

    March Marine / Nano Brewery Pump Learn More
    Add to Wish List Add to Compare
  9. Serfilco 44-0581C 1-1/2x1MPGR-D.75

    Serfilco

    1-1/2x1MPGR-D.75

    44-0581C
    $1,173.79
    Centrifugal Horizontal Magnetic Coupled Pump .75 HpCentrifugal Horizontal Magnetic Coupled Pump .75 Hp Series D magnetic coupled pumps are seal-less, providing for maintenance-free and leak-proof operation. The magnetic coupling acts as a clutch ...
    3/4HP 190/380 // 230/460V TEFC Learn More
    Add to Wish List Add to Compare
  10. Serfilco 44-0571A 1-1/2x1MPGR-E.75

    Serfilco

    1-1/2x1MPGR-E.75

    44-0571A
    $1,927.07
    Centrifugal Horizontal Magnetic Coupled Pump .75 HpCentrifugal Horizontal Magnetic Coupled Pump .75 Hp Series D magnetic coupled pumps are seal-less, providing for maintenance-free and leak-proof operation. The magnetic coupling acts as a clutch ...
    3/4HP 115/208-230V EXP Learn More
    Add to Wish List Add to Compare
View as List Grid

Items 31-40 of 309

Set Descending Direction
per page
Page
Compare Products
  1. Remove This Item
Compare
Clear All
Shop By
Now Shopping by
  1. Category Magnetic Coupled (Seal-less) Pumps Remove This Item
Clear All
Shopping Options
Category
  1. ANSI Pumps 4 items
  2. Back Pullout 34 items
  3. Center Line Discharge 23 items
  4. Chemical Processing Pumps 265 items
  5. Corrosion Resistant Plastic 213 items
  6. Dry Running Pumps 39 items
  7. Metal Alloy Pumps 40 items
  8. Non-Metallic Pumps 157 items
  9. Self Priming Pumps 8 items
  10. Variable Speed Pumps 1 item
  11. Submersible pumps 13 items
Phase (Ø)
  1. Single (1) 135 items
  2. Three (3) 106 items
Voltage (Range)
  1. 110-120 66 items
  2. 208-230/460//190-220/380-415 10 items
  3. 220-240/460-480 79 items
  4. 110-120/220-240 66 items
  5. 220-240 19 items
  6. 208-240/460 12 items
  7. 460-480 6 items
  8. 12/24/36 VDC 21 items
Horse Power (HP)
  1. 1/4 3 items
  2. 1/3 17 items
  3. 1/2 21 items
  4. 2/3 1 item
  5. 3/4 21 items
  6. 1 22 items
  7. 1 1/2 5 items
  8. 2 10 items
  9. 3 20 items
  10. 5 21 items
  11. 7 1/2 20 items
  12. 10 6 items
inlet size
  1. Less than 1" 84 items
  2. 1" 69 items
  3. 1 ½" 39 items
  4. 2" 60 items
  5. 3" 5 items
PRICE $
$  -  $
Motor
  1. Air-Pneumatic 10 items
  2. ChemDuty 14 items
  3. EXP (C 1, Gp C/D & C11, Gp F/G) 36 items
  4. EXP (C 1, Gp C/D) 8 items
  5. Hermetically Sealed 14 items
  6. ODP 19 items
  7. Open 48 items
  8. TEFC 133 items
  9. TENV 9 items