My Cart

Horizontal Pumps

Designed and meant to be used as a horizontally mounted assembly. This includes feet on the pump, motor or both for securing the pump and motor to its floor or structure. The most common type of Horizontal pump is the End Suction, where the fluid enters the front end of the casing and exits perpendicularly. The source of liquid is either above the pump, in which case it is a positive head and no special priming is needed. If the liquid source is below the pump then either a priming chamber is needed or use of some sort of suction side valve, i.e. foot valve, to maintain prime in an open pumping system. If the inlet and outlet go into the same tank, i.e. re-circulating or filtering, and the lines are kept below the surface level, then after initial priming the system will maintain its prime.The two big considerations that must be given to horizontal pumps is priming method and NPSHa.Typical Centrifugal Horizontal pumps include mechanically sealed, magnetic coupled seal-less, self-priming, multistage, jet, back pullout, portable, API and ANSI to name a few.
View as List Grid

Items 161-170 of 288

Set Descending Direction
per page
  1. March Pumps

    12v DC March Pump Brush

    BC-2CP-MD 12V DC Brush

    $531.00

    12V DC March pump, magnetic.

    12 volt Compact and adaptable to many applications, March Series 2 pumps can deliver a maximum flow of 5.5GPM (18.5 LPM) and handle a maximum head of up to 13.5 ft. (2.7m) (32 ft. [12m] when driven by an air motor). I...

    12VDC Learn More
  2. Little Giant Pumps

    3-MDX

    581031

    $420.47
    Magnetic Drive Pump 115V, 6' Power Cord, 3-Prong Plug. For other chemical pumps see March pumps BC-3CP-MD
  3. March Pumps

    Magdrive pump air motor

    BC-4C-MD-AM-Air

    $1,156.50

    Magdrive pump with Air Motor, pneumatic

    Magdrive pumps can deliver a maximum flow of 14 GPM (50 LPM) and are capable of serving applications with a maximum head of 21.5 ft. (4.7m) (49 ft. [15.6 m] when driven by an air motor). Magdrive pump appli...

  4. Jabsco Pumps

    12Vdc Circulation Mag pump

    59510-0012

    $199.00
    • Circulating pump for galley, hot water systems, heating systems, windshield washing and applications where re-circulation is required. Auto uses include for circulation of intercooler coolant. Direct replacement for Johnson CO10P5-2 and CM10P...
    12v Brushless Learn More
  5. March Pumps

    March Magnetic Drive Pump ODP

    MDX-1/2 115V

    $358.88
    March Magnetic Drive Pump 115V, 3' Power Cord, 3-Prong Plug. For beer making will handle wort at boiling temperature.

    Ceramic Magnet Exposed

    115v Learn More
  6. March Pumps

    Magnetic Drive Pump ODP

    MDX-5/8 115V

    $349.88
    Magnetic Drive Pump 115V, 3' Power Cord, 3-Prong Plug. 5/8" hose barbs.

    Ceramic Magnet Exposed

  7. March Pumps

    Magnetic Drive Pump ODP

    MDXT-3 115V

    $326.25
    Magnetic Drive Pump 115V, 3' Power Cord, 3-Prong Plug. March sealless pump with 3/8" MNPT outlet.

    Ceramic Magnet Exposed

    115v, 3/8", 3' power cord Learn More
  8. March Pumps

    Magnetic Drive Pump ODP

    MDXT-3 5/8

    $343.13
    Magnetic Drive Pump 115V, 3' Power Cord, 3-Prong Plug

    Ceramic Magnet Exposed

  9. March Pumps

    PP mag. Sub. Pump

    5C-MD 115V

    $1,663.88
    Polypropylene (Front and Rear Housing, Impeller), Buna N (O-Ring), Ceramic (Shaft, Thrust Washers), Ceramic Magnet UsesSubmersible only (blue) 115 single phase. 6FT SJT line cord and plug. 250 watt motor.The most common applications for the 5C-...
  10. March Pumps

    Magnetic Drive Pump ODP

    MDX-3-5/8 115V

    $343.13

    Magnetic Drive Pump 115V, 3' Power Cord, 3-Prong Plug. Applications: coffee dispensers, bio-medical, dryers, ice makers, electrostatic painting, photographic processing, printing, vending equipment, marine air-conditioning, aquariums, and laser co...

    115v 5/8" ODP Learn More
View as List Grid

Items 161-170 of 288

Set Descending Direction
per page