My Cart

Horizontal Pumps

Designed and meant to be used as a horizontally mounted assembly. This includes feet on the pump, motor or both for securing the pump and motor to its floor or structure. The most common type of Horizontal pump is the End Suction, where the fluid enters the front end of the casing and exits perpendicularly. The source of liquid is either above the pump, in which case it is a positive head and no special priming is needed. If the liquid source is below the pump then either a priming chamber is needed or use of some sort of suction side valve, i.e. foot valve, to maintain prime in an open pumping system. If the inlet and outlet go into the same tank, i.e. re-circulating or filtering, and the lines are kept below the surface level, then after initial priming the system will maintain its prime.The two big considerations that must be given to horizontal pumps is priming method and NPSHa.Typical Centrifugal Horizontal pumps include mechanically sealed, magnetic coupled seal-less, self-priming, multistage, jet, back pullout, portable, API and ANSI to name a few.
View as List Grid

Items 111-120 of 288

Set Descending Direction
per page
Page
  1. Serfilco 44-4301C 1x3/4MRGR-F.75

    Serfilco

    1x3/4MRGR-F.75

    44-4301C
    $2,097.63
    Centrifugal Horizontal Magnetic Coupled Pump .75 HpCentrifugal Horizontal Magnetic Coupled Pump .75 Hp Series D magnetic coupled pumps are seal-less, providing for maintenance-free and leak-proof operation. The magnetic coupling acts as a clutch ...
    3/4HP 190/380 // 230/460V EXP Learn More
    Add to Wish List Add to Compare
  2. March 809-PL-HS-115V PPS plastic Circulation pump

    March Pumps

    PPS plastic Circulation pump

    809-PL-HS 115V
    $418.50
    Inline circulating pump, Ryton pump housing. 809HS is a PPS, polyphenylene sulfide (Trade names Rytonï½® by Phillips Petroleum) is the oldest material in the high performance, injection-moldable category. Food Grade plastic. For beer making will ...
    115v High Speed Hot Wort Brew pump Learn More
    Add to Wish List Add to Compare
  3. march te-6k 3-phase pps

    March Pumps

    Kynar magdrive pump

    TE-6K-MD 3PH 1/2HP
    $1,570.50

    Kynar magdrive pump, Magnetic Coupled Pump .5 Hp.

    PVDF Impeller 3.125. Magnetic coupled pumps are seal-less, providing for maintenance-free and leak-proof operation. The magnetic coupling acts as a clutch to provide overload protection. The impel...

    230/460v Learn More
    Add to Wish List Add to Compare
  4. March TE-7K-MD-1P-.75HP March Kynar Magdrive Pump

    March Pumps

    March Kynar Magdrive Pump

    TE-7K-MD 1PH 3/4HP
    $1,884.38

    March Series 7 magdrive sealless Kynar pumps are the "workhorses" or the March product line. Ceramic spindle is standard. Drive magnet is separated from impeller magnet, preventing fluids from contacting the motor drive shaft, and allowing the mot...

    115/230v 3/4HP Kynar Learn More
    Add to Wish List Add to Compare
  5. MARCH_AC-5c pump Marine Air Conditioner

    March Pumps

    March magnetic pump PP 1080GPH

    AC-5C-MD 115V
    $664.88

    Marine Air Conditioner Circulation Pump 0150-0026-0100 

    March Seawater Circulation Pumps. Polypro magnetic coupled pump. Motor is ODP 115 single phase.

    Connections are hose barb. 0150-0026-0100. Often used on Kodak plate processor polychrome 80N...

    March Marine / Nano Brewery Pump 115v Learn More
    Add to Wish List Add to Compare
  6. AC-5B-MD chugger pump

    March Pumps

    March Beer making pump

    AC-5B-MD
    $776.25

    March beer chuggger pump is magnetic drive unit built specifically to handle hot wort and water.The unit requires liquid being pumped to lubricate the internal parts. If the pump is run dry for a period of time the impeller and shaft may become da...

    March Nano Brewery Pump 115v Learn More
    Add to Wish List Add to Compare
  7. March AC-5SSB-MD March Stainless Steel Beer making pump

    March Pumps

    March Stainless Steel Beer making pump

    AC-5SSB-MD
    $1,199.25

    March beer pump is a non-self-priming magnetic drive unit built specifically to handle hot wort and water.The unit requires beer being pumped to lubricate the internal parts. If the pump is run dry for a period of time the impeller and shaft may b...

    March Nano Brewery Pump 115v Learn More
    Add to Wish List Add to Compare
  8. March Beer making pump

    March Pumps

    March Beer making pump

    815-PL 115V
    $409.50

    March Pump's 815-PL Beer Pump is an American seal-less centrifugal magnetic drive pump ideal for home brewing. It is capable of generating a maximum flow of 7 gallons per minute at 4.5 feet, and its maximum head is 18.6 Feet (or around 8PSI)....

    March Nano Brewery Pump 115v Learn More
    Add to Wish List Add to Compare
  9. March Beer making pump

    March Pumps

    March Beer making pump

    815-PL-C 115V
    $400.50

    March Pump's 809-PL-HS-C Beer Pump is an American seal-less centrifugal magnetic drive pump ideal for home brewing. It is capable of generating a maximum flow of 7.5 gallons per minute at 2 feet, and its maximum head is 12.1 Feet (or around 5PSI)...

    March Nano Brewery Pump 115v Learn More
    Add to Wish List Add to Compare
  10. march pump TE_6t

    March Pumps

    March Ryton magdrive 1/2 hp

    TE-6T-MD 3PH 1/2HP
    $1,407.00

    March Centrifugal Magnetic Coupled Pump .5 Hp. Magnetic pumps are seal-less, providing for maintenance-free and leak-proof operation. The magnetic coupling acts as a clutch to provide overload protection. The broad range of construction materials ...

    230/460v 1/2HP Ryton Learn More
    Add to Wish List Add to Compare
View as List Grid

Items 111-120 of 288

Set Descending Direction
per page
Page
Compare Products
  1. Remove This Item
Compare
Clear All
Shop By
Now Shopping by
  1. Category Magnetic Coupled (Seal-less) Pumps Remove This Item
Clear All
Shopping Options
Category
  1. ANSI Pumps 8 items
  2. Back Pullout 38 items
  3. Center Line Discharge 31 items
  4. Chemical Processing Pumps 236 items
  5. Corrosion Resistant Plastic 196 items
  6. Dry Running Pumps 35 items
  7. Metal Alloy Pumps 38 items
  8. Non-Metallic Pumps 144 items
  9. Self Priming Pumps 8 items
  10. Variable Speed Pumps 1 item
  11. Submersible pumps 11 items
Phase (Ø)
  1. Single (1) 117 items
  2. Three (3) 104 items
Voltage (Range)
  1. 110-120 70 items
  2. 208-230/460//190-220/380-415 10 items
  3. 220-240/460-480 77 items
  4. 110-120/220-240 44 items
  5. 220-240 19 items
  6. 208-240/460 12 items
  7. 460-480 6 items
  8. 12/24/36 VDC 25 items
Horse Power (HP)
  1. 1/4 3 items
  2. 1/3 2 items
  3. 1/2 20 items
  4. 2/3 1 item
  5. 3/4 21 items
  6. 1 21 items
  7. 1 1/2 5 items
  8. 2 10 items
  9. 3 21 items
  10. 5 21 items
  11. 7 1/2 20 items
  12. 10 6 items
  13. 20 2 items
inlet size
  1. Less than 1in 92 items
  2. 1in 41 items
  3. 1 ½" 39 items
  4. 2in 58 items
  5. 3" 8 items
PRICE $
$  -  $
Manufacturer
  1. Finish Thompson Pumps (FTI) 92 items
  2. Jabsco Pumps 3 items
  3. Little Giant Pumps 29 items
  4. March Pumps 137 items
  5. Oberdorfer Pumps 8 items
  6. Serfilco 19 items
Motor
  1. Air-Pneumatic 5 items
  2. ChemDuty 14 items
  3. EXP (C 1, Gp C/D & C11, Gp F/G) 25 items
  4. EXP (C 1, Gp C/D) 5 items
  5. Hermetically Sealed 15 items
  6. ODP 18 items
  7. Open 52 items
  8. TEFC 125 items
  9. TENV 11 items