My Cart

Horizontal Pumps

Designed and meant to be used as a horizontally mounted assembly. This includes feet on the pump, motor or both for securing the pump and motor to its floor or structure. The most common type of Horizontal pump is the End Suction, where the fluid enters the front end of the casing and exits perpendicularly. The source of liquid is either above the pump, in which case it is a positive head and no special priming is needed. If the liquid source is below the pump then either a priming chamber is needed or use of some sort of suction side valve, i.e. foot valve, to maintain prime in an open pumping system. If the inlet and outlet go into the same tank, i.e. re-circulating or filtering, and the lines are kept below the surface level, then after initial priming the system will maintain its prime.The two big considerations that must be given to horizontal pumps is priming method and NPSHa.Typical Centrifugal Horizontal pumps include mechanically sealed, magnetic coupled seal-less, self-priming, multistage, jet, back pullout, portable, API and ANSI to name a few.
View as List Grid

Items 1-10 of 109

Set Descending Direction
per page
Page
  1. Pacer Pumps

    SE11/2ABL-G.5C Self priming pump

    58-11A3-G.5C

    $1,209.23
    Pacer S pump close coupled to a TEFC 115/230v 1 phase electric motor. Self priming pump, FRP plastic resists abrasive particles, good for most water transfer applications, fountains, irrigation. Pacer pumps are made in the USA. Pacer pump has b...
    1/2hp, 115.230v Learn More
  2. MP Pumps

    FloMax 10 Pump w/ Motor

    22779

    $6,950.00
    Cast Iron Flomax 10 are self-priming pumps, pipe size 2" NPT. Electric Motor Driven Pump using Close-Coupled Cast Iron Electric Motor-7.5 HP
    7.5HP 230 1phase Learn More
  3. Pacer Pumps

    SPRY1-1/2AV-G.5C

    58-21A1-G.5

    $897.00
    Pacer S pump close coupled to a TEFC 115/230v 1 phase electric motor. Self priming pump, POLY plastic resists abrasive particles, good for most water transfer applications, fountains, irrigation. Pacer pumps are made in the USA. Pacer pump has ...
    .5HP/1750 Learn More
  4. MP Pumps

    FM 15 230v

    38481

    $5,137.50

    Flomax 15 230v/1 are self-priming pumps, pipe size 3" NPT. Single Phase Electric Motor Driven Pump using Close-Coupled Cast Iron Electric Motor-7.5 HP

    Anyone who has ever owned or maintained a pool will tell you that every pool needs a good filte...

    7.5HP 230v/1 TEFC Learn More
  5. Pacer Pumps

    Plastic Corrosion Resistant pump PCE2AL-G.5C

    60-11A4-G.5C

    $879.75

    Plastic Corrosion Resistant Pump 1/2HP 1750RPM.

    PC Horizontal Pump

    All major pump parts are precision molded of tough, corrosion resistant glass-reinforced polyester, polypropylene, Ryton or Noryl thermoplastic. These high strength plastics prov...

    115/230v 1/2 HP Learn More
  6. PumpBiz

    Fountain Pond Pump 1/2hp Brass

    PFU51

    $2,701.00

    Submersible brass pond pumps specially designed for use in decorative water fountain displays.

    Brass construction, 4 and 6 vane open impeller. 304 stainless steel screen with screen area of 264 sq. in. wrap around. Discharge can rotate 90ï½°; ...

    115v 1/2HP Learn More
  7. Flotec Pumps

    Stainless Steel Sprinkler Utility Pump

    2825SS-01

    $666.00
    Features:
    • Stainless Steel Pump Housing
    • Continuous duty rated 1 HP, 115 Volt motor , 3,450 RPM
    • Permanently lubricated Bearings mean no maintenance problems
    • Completely portable; pump mounted on stand with handle
    • Factory installed 6' power cord wit...
    Simer sprinkler pump Learn More
  8. Webtrol

    Corrosion Resistant Pump

    PC33R

    $1,789.95
    The Webtrol PC Series Centrifugal is completely corrosion resistant through the use of 316 stainless steel and high impact, glass, reinforced Noryl. The compact, light weight design of the PC Series Centrifugal makes it ideal for cabinet instal...
    1/3HP 115V ODP Learn More
  9. Webtrol

    Corrosion Resistant Pump

    PC50R

    $1,789.95

    Corrosion resistant Centrifugal Pump. The Webtrol PC Series Centrifugal is built for the professional who is committed to quality and customer satisfaction.The Webtrol PC Series Centrifugal is completely corrosion resistant through the use of 316 ...

    1/2HP 115/230V ODP Learn More
  10. Webtrol

    Corrosion Resistant Pump

    PC75R

    $1,923.14
    Webtrol PC Series Centrifugal pump iscompletely corrosion resistantthrough the use of 316 stainlesssteel and high impact, glass reinforced Noryl. The compact,light weight design of the PC Series Centrifugal makes it ideal for cabinet installati...
    3/4HP 115/230V ODP Learn More
View as List Grid

Items 1-10 of 109

Set Descending Direction
per page
Page