My Cart

Horizontal Pumps

Designed and meant to be used as a horizontally mounted assembly. This includes feet on the pump, motor or both for securing the pump and motor to its floor or structure. The most common type of Horizontal pump is the End Suction, where the fluid enters the front end of the casing and exits perpendicularly. The source of liquid is either above the pump, in which case it is a positive head and no special priming is needed. If the liquid source is below the pump then either a priming chamber is needed or use of some sort of suction side valve, i.e. foot valve, to maintain prime in an open pumping system. If the inlet and outlet go into the same tank, i.e. re-circulating or filtering, and the lines are kept below the surface level, then after initial priming the system will maintain its prime.The two big considerations that must be given to horizontal pumps is priming method and NPSHa.Typical Centrifugal Horizontal pumps include mechanically sealed, magnetic coupled seal-less, self-priming, multistage, jet, back pullout, portable, API and ANSI to name a few.
View as List Grid

Items 31-40 of 347

Set Descending Direction
per page
  1. MP Pumps

    Series 80 w/ motor

    35637

    $2,813.75
    MP Series 80 End Suction Centrifugal Pump. 1.25" NPT suction and 1" NPT horizontal/vertical discharge. Electric Motor Driven Pump using a Close-Coupled Cast Iron Electric Motor - 3 HP, 3-phase, 230/460 V, 3450 RPM. The pumps are right hand rota...
    3HP 230/460v Exp Learn More
  2. AMT Pumps

    12VDC Stainless Pump

    282F-V12-98

    $2,441.63

    12vdc SS Stainless AMT Self-priming Centrifugal pump

    is designed for Industrial and Commercial applications requiring high volume liquid transfer, waste water drainage and processing. These Stainless pumps feature self-cleaning clog resistant imp...

    12v DC 3/4HP TENV Learn More
  3. AMT Pumps

    Self Priming Centrifugal Pump

    15SP15C-1P

    $1,236.75

    1.5HP Self Priming Chemical Pump 115v /230v

    1.5" Self-priming centrifugal pump for circulating, liquid transfer and dewatering applications. This line of AMT Self-Priming Centrifugal pumps is designed for industrial and commercial applications re...

    1.5HP 115/230v Learn More
  4. AMT Pumps

    Self Priming Cast Iron Pump

    2SP20C-1P

    $1,311.13

    2HP Self-priming Cast Iron pump

    for circulating liquid transfer and dewatering applications. This line of AMT Self-Priming Centrifugal pumps is designed for industrial and commercial applications requiring high volume liquid transfer, waste water...

    2HP 1 phase Learn More
  5. Pacer Pumps

    Plastic Corrosion Resistant pump PCE2AL-G.5C

    60-11A4-G.5C

    $879.75

    Plastic Corrosion Resistant Pump 1/2HP 1750RPM.

    PC Horizontal Pump

    All major pump parts are precision molded of tough, corrosion resistant glass-reinforced polyester, polypropylene, Ryton or Noryl thermoplastic. These high strength plastics prov...

    115/230v 1/2 HP Learn More
  6. MP Pumps

    FM5 Pump end only

    26082

    $3,925.00
    Flomax 5 are self-priming pumps, pipe size 1.5" NPT. Pump end for use with standard 56C motor. NOT For use with gas engine. Bronze
  7. MP Pumps

    FM5 Bronze pump

    26646

    $4,612.50
    Bronze pump with electric motor for marine and ship board service. Flomax 5 are self-priming pumps, pipe size 1.5" NPT. Pump with standard 56C motor.FLOMAX® 5 self priming centrifugal pumps are capable of creating vacuum sufficient to lift liqu...
    1.5HP 230/460v Learn More
  8. PumpBiz

    Fountain Pond Pump 1/2hp Brass

    PFU51

    $2,701.00

    Submersible brass pond pumps specially designed for use in decorative water fountain displays.

    Brass construction, 4 and 6 vane open impeller. 304 stainless steel screen with screen area of 264 sq. in. wrap around. Discharge can rotate 90ï½°; ...

    115v 1/2HP Learn More
  9. MP Pumps

    FM30 Pump w/ no engine

    33212

    $4,337.50
    Flomax 30 are self-priming pumps, pipe size 3" NPT. Pump End Only single seal for mounting to Gasoline engine with a 1" diameter shaft. Engine supplied separately.
    6.75" impeller Learn More
  10. MP Pumps

    Series 110 w/ motor

    26545

    $1,875.00
    Series 110 End Suction Centrifugal Pump. 1.5" NPT suction and 1.25" NPT vertical or horizontal discharge. Close-coupled Cast Iron Electric Motor-1HP, 3450 RPM.
View as List Grid

Items 31-40 of 347

Set Descending Direction
per page