My Cart

Horizontal Pumps

Designed and meant to be used as a horizontally mounted assembly. This includes feet on the pump, motor or both for securing the pump and motor to its floor or structure. The most common type of Horizontal pump is the End Suction, where the fluid enters the front end of the casing and exits perpendicularly. The source of liquid is either above the pump, in which case it is a positive head and no special priming is needed. If the liquid source is below the pump then either a priming chamber is needed or use of some sort of suction side valve, i.e. foot valve, to maintain prime in an open pumping system. If the inlet and outlet go into the same tank, i.e. re-circulating or filtering, and the lines are kept below the surface level, then after initial priming the system will maintain its prime.The two big considerations that must be given to horizontal pumps is priming method and NPSHa.Typical Centrifugal Horizontal pumps include mechanically sealed, magnetic coupled seal-less, self-priming, multistage, jet, back pullout, portable, API and ANSI to name a few.
View as List Grid

Items 1-10 of 38

Set Descending Direction
per page
Page
  1. tsurumi 4" trash pump Tsurumi-EPT3-100HA.jpg

    Tsurumi

    Gas Engine Trash Pump 4"

    EPT3-100HA
    $3,387.00

    4" Trash pump, Honda GX.

    Tsurumi Heavy-duty gas engine Trash Pump with Honda engine, with low level oil sensor, deliver high power from a compact, reliable design. Durable Rolled-Steel frame provides pump/engine with maximum protection, perfect e...

    4" 11HP 30,000GPH Honda Learn More
    Add to Wish List Add to Compare
  2. tsurumi_td5-300.jpg

    Tsurumi

    Gas Diaphragm Pump 3"

    TD5-300
    $2,355.00

    Tsurumi Heavy-duty gas engine diaphragm Pump with Honda engine, oil sensor, deliver high power from a compact, reliable design. Durable Rolled-Steel frame provides pump/engine with perfect ease of handling or transport, and safe operation.

    Push H...

    3" Honda GX120 Learn More
    Add to Wish List Add to Compare
  3. MP 36764 stainless steel flomax fm8 pump gas engine self priming

    MP Pumps

    316SS Self Priming Pump Honda

    38577
    $6,112.50

    316SS self priming pump powered by Honda gas engine.

    Stainless Steel Flomax 8 pump with Honda engine are self-priming pumps, pipe size 2" NPT. Gas Engine Driven w/ 5 HP Honda, recoil start. 316SS gas semi-trash pumps. 

    Standard features include ...

    5HP Honda Stainless Learn More
    Add to Wish List Add to Compare
  4. MP FM30-18 FM30 Pump w/ 18HP Engine

    MP Pumps

    FM30 Pump w/ 18HP Engine

    38548
    $10,662.50

    Flomax 30 are self-priming pumps, pipe size 3" NPT. FM30 Pump with single seal and 18HP Briggs & Stratton engine. Use for irrigation, dewatering, tank filling, HDD, pilings, bilge, ballast transfer and other large water transfer or construction ap...

    Learn More
    Add to Wish List Add to Compare
  5. tsurumi_td5-200_2.jpg

    Tsurumi

    Gas Diaphragm Pump 2"

    TD5-200
    $2,256.00

    Tsurumi Heavy-duty gas engine diaphragm Pump with Honda engine, oil sensor, deliver high power from a compact, reliable design. Durable Rolled-Steel frame provides pump/engine with perfect ease of handling or transport, and safe operation.

    Push H...

    2" Honda GX120 Learn More
    Add to Wish List Add to Compare
  6. Pacer 58-12U4-E5ICP SE2UL-E5ICP

    Pacer Pumps

    SE2PL-E550

    P-58-12P4 E550
    $640.55
    Pacer Pump Self-Priming, salt brine. Centrifugal Horizontal Mechanical Sealed Pump (Self-Priming) Pacer series with gasoline engine. Great pump for removing water from basements, ditches, swimming pools or anywhere a large volume of water needs...
    4HP 2" Learn More
    Add to Wish List Add to Compare
  7. MP FM30-18 FM30 Pump w/ 18HP Engine

    MP Pumps

    FM30 Pump w/ 18HP Engine

    39143
    $10,350.00

    Flomax 30 are self-priming pumps, pipe size 3" NPT. FM30 Pump with single seal and 18HP Briggs & Stratton engine. Use for irrigation, dewatering, tank filling, bilge, HDD, pilings and other large water transfer or construction applications. Pump i...

    Learn More
    Add to Wish List Add to Compare
  8. MP_FM8 with gas engine

    MP Pumps

    FM 8 w/ Engine

    21323
    $1,358.50
    Flomax 8 are self-priming pumps, pipe size 2" NPT. Gas Engine Driven w/ 3.5 HP B&S. These heavy duty dewatering and transfer pumps are constructed of all cast iron. Used by farmers, contractors and others wanting a dependable centrifugal pump whi...
    3.5HP Briggs Cast Iron Learn More
    Add to Wish List Add to Compare
  9. MP 21372 Flomax pump Flomax 15

    MP Pumps

    Flomax 15 Pump End Only

    21372
    $1,850.00

    Flomax 15 PPK are self-priming pumps, pipe size 3" NPT. Gas Engine Driven Pump End Only PEO for use with a 1" diameter crankshaft. For mounting to a gas engine. Also available in pedestal mount or for NEMA JM motor mounts. See other models. see fl...

    Engine Mount 3" CI Learn More
    Add to Wish List Add to Compare
  10. MP 29635 FM 8 w/ Engine

    MP Pumps

    FM 8 w/ Engine

    29635
    $2,512.50
    Flomax 8 are self-priming pumps, pipe size 2" NPT. Gas Engine Driven w/ 5 HP Honda
    5HP Honda Learn More
    Add to Wish List Add to Compare
View as List Grid

Items 1-10 of 38

Set Descending Direction
per page
Page
Compare Products
  1. Remove This Item
Compare
Clear All
Shop By
Now Shopping by
  1. Category Slurry Pumps Remove This Item
  2. Motor Gas Engine Remove This Item
Clear All
Shopping Options
Horse Power (HP)
  1. 3 1/2 1 item
  2. 4 3 items
  3. 5 3 items
  4. 5 1/2 6 items
  5. 6 1 item
  6. 7 1 item
  7. 8 8 items
  8. 9 3 items
  9. 11 3 items
  10. 13 4 items
  11. 18 2 items
inlet size
  1. 2in 11 items
  2. 3" 14 items
  3. 4" 4 items
PRICE $
$  -  $
Manufacturer
  1. AMT Pumps 4 items
  2. Gorman-Rupp Pumps 3 items
  3. MP Pumps 13 items
  4. Pacer Pumps 10 items
  5. Tsurumi 8 items