Horizontal Pumps
Designed and meant to be used as a horizontally mounted assembly.
This includes feet on the pump, motor or both for securing the pump
and motor to its floor or structure. The most common type of
Horizontal pump is the End Suction, where the fluid enters the
front end of the casing and exits perpendicularly. The source of
liquid is either above the pump, in which case it is a positive
head and no special priming is needed. If the liquid source is
below the pump then either a priming chamber is needed or use of
some sort of suction side valve, i.e. foot valve, to maintain prime
in an open pumping system. If the inlet and outlet go into the same
tank, i.e. re-circulating or filtering, and the lines are kept
below the surface level, then after initial priming the system will
maintain its prime.The two big considerations that must be given to
horizontal pumps is priming method and NPSHa.Typical Centrifugal
Horizontal pumps include mechanically sealed, magnetic coupled
seal-less, self-priming, multistage, jet, back pullout, portable,
API and ANSI to name a few.
-
AMT Pumps
Solids Handling Electric Pump CI Centrifugal
276D-95
$1,163.00Solids Handling Electric Pump Self-priming pump is designed for Industrial and Commercial applications requiring high volume liquid transfer, waste water drainage and processing. These 2" pumps feature self-cleaning clog resistant impeller capa...2HP 230/460v TEFC Learn More -
AMT Pumps
1-1/2" Self Prime Centrifugal pump Stainless
3894-98
25% Off Special Price $1,570.50 Regular Price $2,094.00AMT Self-Priming Stainless Steel Centrifugal pumps are designed for a wide range of applications including chemical processes, waste water treatment and pumping agriculture fertilizers/fumigants. All models are equipped with TEFC (Totally Enclo...230/460v 2HP Learn More -
MP Pumps
FM5 Pump w/ 2HP Motor
26300
$1,850.00Flomax 5 are self-priming pumps, pipe size 1.5" NPT. Electric Motor Driven Pump using a Close-Coupled Cast Iron Electric Motor-2 HP2HP 230/460v Learn More -
MP Pumps
FM5 Pump w/2HP Motor
26550
$2,070.00Flomax 5 are self-priming pumps, pipe size 1.5" NPT. Electric Motor Driven Pump using a Close-Coupled Cast Iron Electric Motor-2 HP2HP 115/230v CI Learn More -
MP Pumps
FM 8 w/ Motor
26478
$2,131.00Flomax 8 are self-priming Cast Iron pumps, pipe size 2" NPT. Electric Motor Driven Pump using a Close-Coupled Electric Motor 2 HP 230/460v/3.2HP 230/460v TEFC CI Learn More -
MP Pumps
FM 8 w/ Motor
26555
$2,040.00Flomax 8 are Cast Iron self-priming pumps, pipe size 2" NPT. Electric Motor Driven Pump using a Close-Coupled Electric Motor 2 HP 115/230v2HP 115/230v CI Learn More -
MP Pumps
FM5 Bronze pump 2HP
26603
25% Off Special Price $3,075.00 Regular Price $4,100.00FM5 Bronze pump 2HP
Flomax 5 bronze are self-priming pumps, pipe size 1.5" NPT. Bilge / Saltwater Pump. Pump with standard 115/230v motor.
Motor base shown is a Option, order separately.
2HP 115/230v Learn More -
MP Pumps
Stainless Steel FM 8 w/ 2HP Motor
33818
$4,140.00Flomax 8 are self-priming pumps, pipe size 2" NPT. Electric Motor Driven Pump using a Close-Coupled SS -
AMT Pumps
Self Priming Cast Iron Pump
2SP20C-3P
23% Off Special Price $922.46 Regular Price $1,198.002HP Self-priming Cast Iron pump
for circulating liquid transfer and dewatering applications. This line of AMT Self-Priming Centrifugal pumps is designed for industrial and commercial applications requiring high volume liquid transfer, waste water...
2HP 3 phase Learn More -
AMT Pumps
Sprinkler / Booster 2HP
379E-95
23% Off Special Price $814.66 Regular Price $1,058.002HPSprinkler/Booster pumps by AMT feature Investment Cast 316 SS closed impellers for high efficiency and resistance against erosion caused by abrasive particles. All models self-prime to 20 feet. Single stage models feature a built-in check valve...
2HP 230v/460v TEFC Learn More