My Cart

Horizontal Pumps

Designed and meant to be used as a horizontally mounted assembly. This includes feet on the pump, motor or both for securing the pump and motor to its floor or structure. The most common type of Horizontal pump is the End Suction, where the fluid enters the front end of the casing and exits perpendicularly. The source of liquid is either above the pump, in which case it is a positive head and no special priming is needed. If the liquid source is below the pump then either a priming chamber is needed or use of some sort of suction side valve, i.e. foot valve, to maintain prime in an open pumping system. If the inlet and outlet go into the same tank, i.e. re-circulating or filtering, and the lines are kept below the surface level, then after initial priming the system will maintain its prime.The two big considerations that must be given to horizontal pumps is priming method and NPSHa.Typical Centrifugal Horizontal pumps include mechanically sealed, magnetic coupled seal-less, self-priming, multistage, jet, back pullout, portable, API and ANSI to name a few.
View as List Grid

Items 471-480 of 496

Set Descending Direction
per page
  1. AMT Pumps

    Portable Gas Engine water Pump

    3824-99

    Call For Price

    Water pump with Briggs Stratton gas engine 4-cycle. Discontinued, See Honda engine version 382A-99 or PACER S Pumps. Utility pump 8460 GPH for use in construction, irrigation, washdown, fire fighting & general dewatering, Calcium and magnesium chl...

    OBSOLETE , call or email for alternative assistance. Parts still available. Learn More
  2. AMT Pumps

    Portable 3" Solid Handling Pump Diesel

    3391-Z5

    20% Off Special Price $6,102.15 Regular Price $7,627.69

    Diesel gas engine solids handling pump. The AMT solids-handling pumps offer an upgraded debris handling capability up to 3/4" solids. Cast-iron construction. Applications include high-volume liquid / water transfer, irrigation, commercial draining...

    Hatz Diesel 7HP Electric Start Learn More
  3. AMT Pumps

    Centrifugal Pedestal Pump

    2820-99

    25% Off Special Price $1,374.61 Regular Price $1,832.81

    AMT Self-Priming Centrifugal Pedestal pumps are designed for a wide range of industrial, agricultural and commercial applications. Heavy duty cast iron construction. Pumps are fitted with a self-cleaning, semi-open impeller and are coupled to a he...

    OBSOLETE, call or email for alternative assistance. Parts still available. Learn More
  4. AMT Pumps

    Selfprime Pedestal Pump

    2850-99

    25% Off Special Price $386.48 Regular Price $515.31

    AMT Self-Priming Pedestal pumps

    are designed for a wide range of industrial, agricultural and commercial applications. Heavy duty cast iron construction. Pumps are fitted with a self-cleaning, semi-open impeller and are coupled to a heavy duty ca...

    Pedestal PTO 1-1/4" CI Learn More
  5. MP Pumps

    FM30 Pump w/ no motor

    33125

    $4,342.44
    Flomax 30 are self-priming pumps, pipe size 3" NPT. Pump End Only single seal for mounting to 254-256TC motor. Motor can be supplied by PumpBiz or customer. 6.75" Impeller.
    6.75" Imp

    Call PumpBiz For accurate pricing on this pump

    Learn More
  6. MP Pumps

    FM30 Pump w/ no motor

    35258

    $5,250.00
    Flomax 30 are self-priming pumps, pipe size 3" NPT. Pump End Only single seal for mounting to 254-256TC motor.
    Cast iron, 7"Bronze impeller, FKM flapper Learn More
  7. MP Pumps

    FM40 Pedestal Pump

    34290

    $18,025.00
    Pedestal Bronze Flomax 40 pumps are self-priming pumps, pipe size 4" NPT. MP 34290: FM40 Pedestal Pump for saltwater marine bilge use often. Made in USA. No companion Flanges.
    Bronze 4" Learn More
  8. MP Pumps

    FM40 Pedestal Pump

    33682

    $10,562.50

    Flomax 40 are self-priming pumps, pipe size 4" NPT. A bearing pedestal is for T-frame motor or belt drive. 6.5" impeller.

    For other style / sizes of PTO Pedestal pumps.

    Cast Iron . 6.5" impeller Learn More
  9. Gorman-Rupp Pumps

    3" Diesel powered Trash Pump

    3S7XZR

    $8,547.81

    Trash pump, powered by diesel

    Hatz 5 HP engine (changing in 2019 to 1B30). 3" Cast aluminum housing with Cast Iron internals.trash pump. 2.6 qt fuel tank provides 110 min. continuous running.

    Ideally suited for a variety of industrial applicatio...

    3" Hatz Diesel 1B30 Learn More
  10. Sta-Rite

    1/2 HP Self priming centrifugal pump

    DPCMS1

    $1,824.00
    Features
    • 1/2hp
    • Single-Phase, 115-volt, 60hz
    • handle and power cord assembled
    • built in flapper style check-valve
    • Rugged one-piece, close-grain cast iron pump body
    • rapid "single-body-fill" priming
    • Powered by 56C motor, thermal overload protected
    • ha...
    115v Learn More
View as List Grid

Items 471-480 of 496

Set Descending Direction
per page