My Cart

Horizontal Pumps

Designed and meant to be used as a horizontally mounted assembly. This includes feet on the pump, motor or both for securing the pump and motor to its floor or structure. The most common type of Horizontal pump is the End Suction, where the fluid enters the front end of the casing and exits perpendicularly. The source of liquid is either above the pump, in which case it is a positive head and no special priming is needed. If the liquid source is below the pump then either a priming chamber is needed or use of some sort of suction side valve, i.e. foot valve, to maintain prime in an open pumping system. If the inlet and outlet go into the same tank, i.e. re-circulating or filtering, and the lines are kept below the surface level, then after initial priming the system will maintain its prime.The two big considerations that must be given to horizontal pumps is priming method and NPSHa.Typical Centrifugal Horizontal pumps include mechanically sealed, magnetic coupled seal-less, self-priming, multistage, jet, back pullout, portable, API and ANSI to name a few.
View as List Grid

Items 1-10 of 17

Set Descending Direction
per page
Page
  1. Pacer Pumps

    60-12C4-P Pedestal Plastic Corrosion Resistant Pump

    PCE2CLCSS

    $446.00
    Pedestal Mounted Plastic Corrosion Resistant Pump. Cast Iron pedestal with 3/4" diameter 316SS shaft.

    PC Horizontal Pump

    All major pump parts are precision molded of tough, corrosion resistant glass-reinforced polyester, polypropylene, Ryton or N...

    2HP Pedestal Mounted Pump Learn More
  2. Pacer Pumps

    SE2FL CSS Pedestal pump

    58-12F4 P

    $634.40

    Pump S with Pedestal.

    Great pump for removing water from bilge or anywhere a large volume of water needs to be removed and spraying water from tankers. Also good for irrigation, water truck, fish farms ect. Structural plastic FRP is light weight ...

    PTO Drive 2" Learn More
  3. Pacer Pumps

    SE2IL CSS Pedestal Mounted

    58-12I4 P

    $473.00
    Plastic self priming pump, Pedestal Mounted or frame mounted for long coupling or belt drive. Pacer Centrifugal Horizontal Mechanical Sealed Pump. Pacer series with CAST IRON BEARING PEDESTAL for long coupling or belt drive. Great pump for de-ic...
    2" PE Pedestal Learn More
  4. Hypro Pumps

    PTO Drive Polypro pump

    9006P-O

    $1,344.68
    PolyPro end suction 1 1/2" x 1 1/4" pump end with Planetary oil bath gear drive for connection to a 21 tooth x 1.375 diameter female PTO spline with locking collar. Rated up to 540 rpm. CCW pump shaft rotation when looking at pump shaft end.
  5. Pacer Pumps

    SE3LL Pedestal Pump

    58-13L4

    $510.00

    Pedestal drive self priming pump. Centrifugal Horizontal Mechanical Sealed. Pacer series with CAST IRON BEARING PEDISTAL for long coupling or belt drive. Great pump for removing water from basements, ditches, swimming pools or anywhere a large vol...

  6. Hypro Pumps

    PTO Drive Polypro pump

    9006P-OB

    $1,465.02
    PolyPro end suction 1 1/2" x 1 1/4" pump end with Planetary oil bath gear drive for connection to a 21 tooth x 1.375 diameter female PTO spline with locking collar. Rated up to 540 rpm. CCW pump shaft rotation when looking at pump shaft end. Si...
  7. Pacer Pumps

    SE2JLCSS Pedestal Self Priming Pump

    58-12J4P

    $460.00

    S pump, cast iron frame mounted (pedestal) for long coupling or PTO drive. Pacer Pumps' S Series Self-Priming Centrifugal pumps are lightweight, chemically resistant pumps for general service on water, salt water, waste water, mild acids and bases...

    Frame mounted no motor Learn More
  8. Pacer Pumps

    SE2JVCSS Pedestal Self Priming Pump

    58-12J1P

    $601.00

    S pump, cast iron frame mounted - pedestal for long coupling or PTO drive. SE2JVCSS Pacer Pumps' S Series Self-Priming Centrifugal pumps are lightweight, chemically resistant pumps for general service on water, salt water, waste water, mild acids ...

    Frame mounted no motor Learn More
  9. Hypro Pumps

    PTO Drive Polypro pump

    9008P-OB

    $1,081.98
    PolyPro end suction 1 1/2" x 1 1/4" pump end with Planetary oil bath gear drive for connection to a 21 tooth x 1.375 diameter female PTO spline with locking collar. Rated up to 1000 rpm. CCW pump shaft rotation. Silicon carbide seal.
  10. Hypro Pumps

    PTO Drive Polypro pump

    9018P-O

    $1,355.09
    PolyPro end suction 1 1/2" x 1 1/4" pump end with Planetary oil bath gear drive for connection to a 21 tooth x 1.375 diameter female PTO spline with locking collar. Rated up to 1000 rpm. CCW pump shaft rotation.
View as List Grid

Items 1-10 of 17

Set Descending Direction
per page
Page